Abstract:Nanostructured silicon anodes have shown extraordinary lithium storage properties for lithium-ion batteries (LIBs) but are usually achieved at low areal loadings (< 1.5 mg·cm −2 ) with low areal capacity. Sustaining sound electrochemical performance at high loading requires proportionally higher ion/electron currents and robust structural stability in the thicker electrode. Herein, we report a three-dimensional (3D) printed silicon-graphene-carbon nanotube (3D-Si/G/C) electrode for simultaneously achieving ultrahigh areal/gravimetric capacities at high mass loading. The periodically arranged vertical channels and hierarchically porous filaments facilitate sufficient electrolyte infiltration and rapid ion diffusion, and the carbonaceous network provides excellent electron transport properties and mechanical integrity, thus endowing the printed 3D-Si/G/C electrode with fast electrochemical reaction kinetics and reversibility at high mass loading. Consequently, the 3D-Si/G/C with high areal mass loading of 12.9 mg·cm −2 exhibits excellent areal capacity of 12.8 mAh·cm −2 and specific capacity of 1007 mAh·g −1 , respectively. In-situ optical microscope and ex-situ scanning electron microscope (SEM) confirm that the hierarchically porous filaments with interconnected carbon skeletons effectively suppress the volume change of silicon and maintain stable micro-lattice architecture. A 3D printed 3D-Si/G/C-1∥3D-LiFePO 4 /G full cell holds excellent cyclic stability (capacity retention rate of 78% after 50 cycles) with an initial Coulombic efficiency (ICE) of 96%. This work validates the feasibility of 3D printing on constructing high mass loading silicon anode for practical high energy-density LIBs.

A Hierarchical 3D Carbon Nanostructure for High Areal Capacity and Flexible Lithium Ion Batteries

Robust 3D nanowebs assembled from interconnected and sandwich-like C@Fe3O4@C coaxial nanocables for enhanced Li-ion storage

Biomass-derived Carbon/silicon Three-Dimensional Hierarchical Nanostructure As Anode Material for Lithium Ion Batteries

Flexible Textile Electrode with High Areal Capacity from Hierarchical V2O5 Nanosheet Arrays

Ferroconcrete-like multilayer VACNTs@Si film for ultra-high areal and volumetric Li-ion storage

Flexible and Stable Lithium Ion Batteries Based on Three-Dimensional Aligned Carbon Nanotube/silicon Hybrid Electrodes

Flexible and robust silicon/carbon nanotube anodes exhibiting high areal capacities

3D printed silicon-based micro-lattices with ultrahigh areal/gravimetric capacities and robust structural stability for lithium-ion batteries

High-Level Heteroatom Doped Two-Dimensional Carbon Architectures for Highly Efficient Lithium-Ion Storage

Rational design of highly conductive and stable 3D flexible composite current collector for high performance lithium-ion battery electrodes

High areal specific capacity of Ni3V2O8/carbon cloth hierarchical structures as flexible anodes for sodium-ion batteries

Boosted Storage Kinetics in Thick Hierarchical Micro–Nano Carbon Architectures for High Areal Capacity Li‐Ion Batteries

Si/C Composite Embedded Nano-Si in 3D Porous Carbon Matrix and Enwound by Conductive CNTs As Anode of Lithium-Ion Batteries

High Areal Capacity Flexible Sulfur Cathode Based on Multi-Functionalized Super-Aligned Carbon Nanotubes

Superior lithium-ion storage performance of hierarchical tin disulfide and carbon nanotube-carbon cloth composites

Constructing three-dimensional Carbon nanotubes/Carbon bifunctional conductive network by in situ chemical vapor deposition for SiO x anode in high-energy lithium-ion batteries

Self-assembly of hierarchical Ti3C2Tx-CNT/SiNPs resilient films for high performance lithium ion battery electrodes

Collaborative Design of Hollow Nanocubes, In Situ Cross-Linked Binder, and Amorphous Void@SiOx @C as a Three-Pronged Strategy for Ultrastable Lithium Storage

Cobalt-promoted Fabrication of 3D Carbon with a Nanotube-Sheet Mutual Support Structure: Scalable Preparation of a High-Performance Anode Material for Li-ion Batteries

Honeycomb-like 3D ordered macroporous SiO x /C nanoarchitectures with carbon coating for high-performance lithium storage

Highly-Flexible 3d Li2s/Graphene Cathode for High-Performance Lithium Sulfur Batteries