Abstract:In the present study, we report the systematic investigation of the effect of chemical oxidation on the structure of single-walled carbon nanotubes (SWNTs) by using different oxidants. The oxidation procedure was characterized by using infrared spectroscopy and transmission electron microscopy (TEM). The SWNTs were produced by chemical vapor deposition (CVD) and oxidized with three kinds of oxidants: (1) nitric acid (2.6 M), (2) a mixture of concentrated sulfuric acid (98 wt %) and concentrated nitric acid (16 M) (v/v = 3/1) and (3) KMnO4. The results reveal that the different functional groups can be introduced when the SWNTs are treated with different oxidants. Refluxing in dilute nitric acid can be considered as a mild oxidation for SWNTs, introducing the carboxylic acid groups only at those initial defects that already exist. The abundance of the carboxylic acid groups generated with this oxidant remained constant along with the treating time. In contrast, sonication of SWNTs in H2SO4/HNO3 increased the incidence of carboxylic acid groups not only at initial defect sites but also at newly created defect sites along the walls of SWNTs. Compared to the two oxidants above, when KMnO4 in alkali was used as the oxidant, which is relatively mild, different amounts of −OH, −CO, and −COOH groups were introduced. The oxidation processes begin mainly with the oxidation of the initial defects that arise during the CVD growth of the SWNTs and are accompanied by processes that can be roughly divided into two steps: (1) the defect-generating step and (2) the defect-consuming step. Specifically, during the defect-generating step, the oxidants attack the graphene structure by electrophilic reactions and generate active sites such as −OH and −CO. This step depends on the oxidant's ability to generate −C−OH groups and to transform them into −CO groups. During the defect-consuming step, the graphene structure of the tube was destroyed by the oxidation of the generated active sites in step 1. The defect-consuming step mostly counts on the ability of the oxidant to etch/destroy the graphite-like structure around the already generated −CO and their neighborhood groups.

Investigations on oxidation cutting and dispersibility of multi-walled carbon nanotubes

Oxidative Treatment, Dispersion Effect, and Simulation of Multi-Walled Carbon Nanotubes in Aqueous Solution

Sulfonitric Treatment Of Multiwalled Carbon Nanotubes And Their Dispersibility In Water

Effects Of Corona Discharge On The Surface Structure, Morphology And Properties Of Multi-Walled Carbon Nanotubes

Effective Chemical Oxidation on the Structure of Multiwalled Carbon Nanotubes.

The Effect of Oxidation on Physicochemical Properties and Aqueous Stabilization of Multiwalled Carbon Nanotubes:Comparison of Multiple Analysis Methods

Preparation, characterization and cellular biological impact of water soluble multiwalled carbon nanotubes

Effect of Chemical Oxidation on the Structure of Single-Walled Carbon Nanotubes

Preparation of Multi-Walled Carbon Nanotubes Acetone Solution and Study of Dispersion Stability

Aqueous Stabilization of Carbon Nanotubes: Effects of Surface Oxidization and Solution Chemistry.

The effects of surface modifications of multiwalled carbon nanotubes on their dispersibility in different solvents and poly(ether ether ketone)

Characterization of Multiwalled Carbon Nanotubes Dispersing in Water and Association with Biological Effects

Surface modification of multi walled carbon nanotube by sulfonic group

Ultrasonic-assisted chemical oxidative cutting of multiwalled carbon nanotubes with ammonium persulfate in neutral media

Monitoring oxidation of multiwalled carbon nanotubes by Raman spectroscopy

A Study of the Functionalization on Multi-Walled Carbon Nanotubes

The Effect of Electrolytic Oxidation on the Electrochemical Properties of Multi-Walled Carbon Nanotubes

Preparation and characterization of the dispersed individual carbon nanotubes solutions based on fullerenols

EFFECTS OF ULTRASONIC RADIATION INTENSITY ON THE OXIDATION OF SINGLE-WALLED CARBON NANOTUBES IN A MIXTURE OF SULFURIC AND NITRIC ACIDS

Solubility increase of multi-walled carbon nanotubes in water

Dispersion of Functionalized Multi-Walled Carbon Nanotubes in Aqueous Solution