Abstract:mpg-C3N4/anatase TiO2 with reactive {001} facets composites were synthesized via a facile ultrasonic dispersion method. Incorporation of mpg-C3N4 into anatase TiO2 was successfully confirmed by X-ray diffraction (XRD). The percentage of exposed {001} facets in TiO2 calculated from the Raman spectra was 80.6%. The microstructure and optical properties of the as-prepared samples were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), nitrogen adsorption-desorption isotherms, UV-vis diffuse reflectance spectra (DRS) and photoluminescence (PL) spectroscopy. The effects of mass ratios of mpg-C3N4/(TiO2 + mpg-C3N4) on the photocatalytic activities of the mpg-C3N4/TiO2 composites were investigated. The photocatalytic experiments indicated that the mpg-C3N4/TiO2 composites showed a much higher photocatalytic activity than the pristine TiO2 and mpg-C3N4 for the degradation of methylene blue (MB) under UV light and visible light irradiation. This enhancement should be attributed to the reactive {001} facets of TiO2 and the heterojunction formed at the interface between anatase TiO2 and mpg-C3N4, thus resulting in a much lower recombination rate of the photoinduced electrons and holes. Compared with the decolorization process, mineralization is slower. The degradation of 2,4-dichlorophenol suggests that the dye sensitization is not the main cause of dye degradation. In addition, the quenching effects of different scavengers proved that the superoxide radicals (O-center dot(2)-) and holes (h(+)) were the main factors for the improved photoactivity under UV-light, while the superoxide radicals (O-center dot(2)-) play important roles in the photocatalytic reaction under visible light irradiation. Repeatability experiments of MB degradation suggest that the mpg-C3N4/TiO2 composites have high stability. The photocatalytic degradations of MB, RhB and MO were measured under UV and visible light irradiation and the photocatalytic degradation efficiency was found to be in the decreasing order of RhB > MB > MO. These results indicate that the incorporation of mpg-C3N4 into anatase TiO2 with reactive {001} facets is an effective method to improve the photocatalytic activity under both UV and visible light.

The Photodegradation Effect of Organic Dye for Metal Oxide (cr2o3, Mgo and V2o3) Treated Cnt/Tio2 Composites

Composite of TiO2 Nanoparticles and Carbon Nanotubes Loaded on Poly(methyl Methacrylate) Nanofibers: Preparation and Photocatalytic Performance

The Improved Photocatalytic Properties of Methylene Blue for V2O3/CNT/TiO2 Composite under Visible Light

The Improved Photocatalytic Properties of Methylene Blue for V<sub>2</sub>O<sub>3</sub>/CNT/TiO<sub>2</sub>Composite under Visible Light

Characterization and photodegradation characteristics of organic dye for Pt–titania combined multi-walled carbon nanotube composite catalysts

Preparation and Photocatalytic Degradation of CNT/TiO₂ Composites Using MWCNT and Various Titanium Alkoxide Precursors

Synthesis and photocatalytic behaviors of Cr 2 O 3 –CNT/TiO 2 composite materials under visible light

Synthesis and photocatalytic behaviors of Cr<sub>2</sub>O<sub>3</sub>–CNT/TiO<sub>2</sub> composite materials under visible light

Fe3O4-CdO Nanocomposite for Organic Dye Photocatalytic Degradation: Synthesis and Characterization

mpg-C3N4/anatase TiO2 with reactive {001} facets composites to enhance the photocatalytic activity of organic dye degradation

Optimization of Cds/Tio2 Nanotube-Array Composite Photocatalysts Prepared by Electrodeposition

Fabrication of M-Cnt/Tio2 (m=cr, Mn and Fe) Composites and the Effect of Transition Metals on Their Photocatalytic Activities

Photoelectrocatalytic Degradation of Dyes in Aqueous Solution Using CNT/TiO2Electrode

Synthesis and Characterization of Cnt / Tio2 Photoelectrocatalytic Electrodes for Methlene Blue Degradation

Photonic effects of Mn-CNT/TiO 2 composites modified by different oxide agents

Photocatalytic Decomposition Of Mb Solution By Cnt/Tio(2) Composites Prepared From Mwcnt And Titanium Source

Photocatalytic Degradation of Methylene Blue by CNT/TiO2Composites Prepared from MWCNT and Titanium N-Butoxide with Benzene

Photocatalytic Degradation of Dyes Using Titania Nanoparticles Supported in Metal-Organic Materials Based on Iron

Photocatalytic degradation of rhodamine B and methylene blue by electrochemically prepared nano titanium dioxide/reduced graphene oxide/poly (methyl methacrylate) nanocomposite

Preparation and Photocatalytic Activity of CdSe-TiO2 Composite Designed for High Decomposition Effect

Mechanism, Photocatalytic And Bactericidal Effects For The Nanocarbon/Tio(2) Composites