Abstract:Abstract The permanent implantation of stents with and without carrying drugs led to the unresolvable long-term complications such as restenosis and thrombosis. There are increasing interests in bioresorbable stents, which have the potential to resume the vessel tone and mitigate complications. The bioresorbable stent served as a temporary scaffold for an expected period of 6 to 12 months. The design of both polymeric material and stent structure is acknowledged to impact the mechanical integrity of bioresorbable stent. Poly-l-lactide (PLLA), a polymer-based material, is the most adopted bioresorbable stent materials due to its sufficient strength and degradation resistance. The mechanical performances of the PLLA stents need to be evaluated before it is considered to serve in the clinical application. Because of difficulty and time-consuming of physical tests, finite element method (FEM) has become an efficient way to solve the problem. However, the mechanical performances of PLLA stents during the degradation process could not be fully captured using the existing numerical models. A strain-based degradation numerical model with consideration of stent-artery interaction was proposed based on the previous published experimental data. In this model, the elongation fracture of the PLLA material was correlated to the degradation degree, a scalar factor controlled by the time and local strain. The degradation evolution process was then fully captured after the stent implantation using the derived material model. With continuously loss of mass in material, the degradation rates were not uniform in different locations along the stent structure. Severe degradation was observed at the higher strain regions of the stent, which locates at the outer surface of the stent, near the crowns of the ring stent strut. At first stage of degradation, the stent strut thinning was observed in the model which was also found in the previous experimental study. At second stage of degradation, the degradation happened at the connection region between the link strut and ring struts which resulted in the break of mechanical integrity. The diameter of the vessel has minor change during the first stage of the degradation process, while at the second stage, with the breakdown of the ring structure, the vessel recoiled to its original diameter in one month time. The two-staged degradation process showed a vision for the ideal stent design. The developed computational model provided more insights into the degradation process, which could complement the discrete experimental data for improving the design and clinical management of the bioresorbable vascular scaffold.

AS-153 Comparison of Acute Recoil Between Bioabsorbable Poly-L-lactic Acid Stent and Metallic Stent in Porcine Model

Comparison of Acute Recoil Between Bioabsorbable Poly-L-lactic Acid XINSORB Stent and Metallic Stent in Porcine Model

Poly-L-Lactic Acid/Amorphous Calcium Phosphate Bioabsorbable Stent Causes Less Inflammation Than Poly-L-Lactic Acid Stent in Coronary Arteries

Consecutive IVUS Assessment of Acute Recoil of Fully Bioabsorbable Poly-L-Lactic Acid Scaffold Within 4 Weeks in Porcine Model

Safety and Efficacy of Cobalt Chromium Alloy Based Sirolimus-Eluting Stent with Bioabsorbable Polymer in Porcine Model.

Short-term Effects of Fully Bioabsorbable PLLA Coronary Stents in a Porcine Model

Structural Optimization and Finite Element Analysis of Poly-L-lactide Acid Coronary Stent with Improved Radial Strength and Acute Recoil Rate.

In Silico Evaluation of In Vivo Degradation Kinetics of Poly(Lactic Acid) Vascular Stent Devices

Advances in Study of Polymeric Bioabsorbable Coronary Stents

Evaluation of a Novel Paclitaxel-Eluting Stent with a Bioabsorbable Polymeric Surface Coating in the Porcine Artery Injury Model

Polymer-free Dual Drug-Eluting Stents Evaluated in a Porcine Model

Safety and histocompatibility of a novel biogradable stent implanted into the coronary artery in a porcine model

GW24-e1275 Improved Biocompatibility of Poly (D, L-Lactide -Co-glycolide) and Poly-L-lactic Acid Blended with Amorphous Calcium Phosphate in Rat Aortas and Rabbit Iliac Arteries

AS-30: the Preclinical Assessment of a Novel Biodegradable Rapid Prohealing Polymer with Sirolimus -Eluting Coating Stent in Porcine Model

Novel Biodegradable Drug-Eluting Stent Composed of Poly-L-lactic Acid and Amorphous Calcium Phosphate Nanoparticles Demonstrates Improved Structural and Functional Performance for Coronary Artery Disease.

A novel biodegradable polymer-coated cobalt-chromium alloy sirolimus-eluting stent：evaluation in a porcine model

[The in Vivo Thrombosis Evaluation for the Biodegradable Polymer Stent].

Drug-Eluting Biodegradable Poly-D/L-Lactic Acid Vascular Stents: An Experimental Pilot Study

A Biodegradable-Polymer-plga-coated,sirolimus-eluting Cobalt-chromium Alloy Stent:Safety and Efficacy Evaluation in a Porcine Model

Strain-Based Degradation Model With Application to Poly-L-Lactide Acid (PLLA) Artery Stent

Safety of a novel biodegradable stent implanted in the coronary artery in a porcine model