Abstract:Lithium-rich layered oxide Li1.2Ni0.13Co0.13Mn0.54O2 (LNCMO) coated with a nanocomposite layer of Li3PO4 and carbon (LNCMO@Li3PO4/C) is designed and facilely prepared as the cathode material for rechargeable lithium ion batteries. The structure and morphology of the LNCMO@Li3PO4/C material are characterized by X-ray diffraction, scanning electron microscopy and transmission electron microscopy, and its electrochemical performance is measured by the constant current charge and discharge, electrochemical impedance spectroscopy and cyclic voltammetry. It is clearly revealed that the LNCMO surface is uniformly coated by the Li3PO4/C nanocomposite layer. Moreover, the coating process induces the layer-to-spinel phase transformation, leading to the formation of a spinel nanophase in the LNCMO@ Li3PO4/C material. The presence of Li3PO4/C composite coating with high ionic and electronic conductivity and the spinel nanophase synergistically contribute to the electrochemical properties. Therefore, the LNCMO@ Li3PO4/C material shows a high discharge capacity of 124.4 mA h g(-1) even at a current density of 1000 mA g(-1), a remarkable capacity retention of 87.3% after 200 cycles, and a desirable initial coulombic efficiency of 87.0%. The LNCMO@ Li3PO4/C material represents an attractive alternative to high-rate and long-life electrode materials for lithium-ion batteries.

LiMnBO3/Carbon Composite Material Synthesized by Ball-milling and Postannealing

High-performance Carbon-Coated LiMnPO4 Nanocomposites by Facile Two-Step Solid-State Synthesis for Lithium-Ion Battery

LiMnPO4·Li3V2(PO4)3 Composite Cathode Material Derived from Mn(VO3)2 Nanosheet Precursor

Synthesis Mechanism and Characterization of LiMn 0.5 Fe 0.5 PO 4 /C Composite Cathode Material for Lithium -Ion Batteries

Electrochemical Performance of Nanocrystalline Li3V2(PO4)3/carbon Composite Material Synthesized by a Novel Sol–gel Method

Synthesis mechanism and characterization of LiMn0.5Fe0.5PO4/C composite cathode material for lithium-ion batteries

Sol-Gel Synthesis and Electrochemical Performance of LiMnPO_4/C Cathode Material

The 3D networked MnCO3-C composite as anode materials for lithium ion batteries

Structure, Morphology, and Composition of Mn 3 N 2 /mno/c Composite Anode Materials for Li-Ion Batteries

Carbon-coated Li3V2(PO4)(3) Composite Cathode Material for Lithium-Ion Batteries: Sol-gel Synthesis and Performance

Synthesis and Properties of Li2MnSiO4/C Cathode Materials for Li-ion Batteries

Preparation and Electrochemical Performance of Li_2MnSiO_4/CNTs Composite Cathode Material for Lithium Ion Batteries

Lithium-Rich Li1.2ni0.13co0.13mn0.54o2 Oxide Coated By Li3po4 And Carbon Nanocomposite Layers As High Performance Cathode Materials For Lithium Ion Batteries

High-performance, nanostructure LiMnPO 4 /C composites synthesized via one-step solid state reaction

Mesoporous MnO/C Composite Synthesised from the Precursor of Mn 3 (C 6 H 5 O 7 ) 2 and the Application in Li‐ion Batteries

SiMn–Graphite composites as anodes for lithium ion batteries

The Synthesis of LiMn x Fe 1-x PO₄/C Cathode Material through Solvothermal Jointed with Solid-State Reaction.

Heterogeneous Synthesis and Electrochemical Performance of LiMnPO4/C Composites As Cathode Materials of Lithium Ion Batteries

Li3V2(PO4)3/C Composite Material with Porous Structure and Nano-carbon Webs Synthesized through Liquid Nitrogen Quenching

Hydrothermal Synthesis of LiMn2O4/C Composite As a Cathode for Rechargeable Lithium-Ion Battery with Excellent Rate Capability

Carboxylated carbon nanotube anchored MnCO3 nanocomposites as anode materials for advanced lithium-ion batteries