A Theoretical Study of Grating Structured Triboelectric Nanogenerators

Simiao Niu,Sihong Wang,Ying Liu,Yu Sheng Zhou,Long Lin,Youfan Hu,Ken C. Pradel,Zhong Lin Wang

DOI: https://doi.org/10.1039/c4ee00498a

IF: 32.5

2014-01-01

Energy & Environmental Science

Abstract:A theoretical model for grating structured triboelectric nanogenerators is provided, which outlines its structural and material optimization strategies.

What problem does this paper attempt to address?

Theories For Triboelectric Nanogenerators: A Comprehensive Review

He Zhang,Linjie Yao,Liwei Quan,Xianglong Zheng

DOI: https://doi.org/10.1515/ntrev-2020-0049

2020-01-01

Nanotechnology Reviews

Abstract:Triboelectric nanogenerators (TENGs) have attracted much attention as energy harvesting and sensor devices. Compared with experimental means, theoretical analysis is of low cost and time-saving for behavior prediction and structural optimization and is more powerful for understanding the working mechanism of TENGs. In this article, the theoretical system for performance simulation of TENGs has been reviewed systematically. The parallel-plate capacitor model, the distance-dependent electric field (DDEF) model, figures of merit (FOMs), and multi-parameter analysis are introduced. The parallel-plate capacitor model is the most fundamental model of TENGs, which is used to simulate the output of TENGs with planar configurations. For non-planar TENGs, the DDEF model is proposed, according to which the electric field is assumed to be distance-dependent rather than being uniform throughout the space. Further, to realize the standardization of TENGs, a series of FOMs are proposed as the standardized evaluation tools for TENGs' output performance, which are used to reflect the influence of device parameters on the output from different aspects. Lastly, the multi-parameter analysis is introduced to consider the impact of multiple parameters on the output of TENGs simultaneously. These theories constitute the theoretical simulation system of TENGs, which could be used to guide the experimental work on TENGs and boost device optimization in commercial manufacturing.
Theory of Sliding-Mode Triboelectric Nanogenerators

Simiao Niu,Ying Liu,Sihong Wang,Long Lin,Yu Sheng Zhou,Youfan Hu,Zhong Lin Wang

DOI: https://doi.org/10.1002/adma.201302808

IF: 29.4

2013-01-01

Advanced Materials

Abstract:The triboelectric nanogenerator (TENG) is a powerful approach toward new energy technology, especially for portable electronics. A theoretical model for the sliding-mode TENG is presented in this work. The fi nite element method was utilized to characterize the distributions of electric potential, electric fi eld, and charges on the metal electrodes of the TENG. Based on the FEM calculation, the semi-analytical results from the interpolation method and the analytical V-Q-x relationship are built to study the sliding-mode TENG. The analytical V-Q-x equation is validated through comparison with the semi-analytical results. Furthermore, based on the analytical V-Q-x equation, dynamic output performance of sliding-mode TENG is calculated with arbitrary load resistance, and good agreement with experimental data is achieved. The theory presented here is a milestone work for in-depth understanding of the working mechanism of the sliding-mode TENG, and provides a theoretical basis for further enhancement of the sliding-mode TENG for both energy scavenging and self-powered sensor applications.
Theoretical Study of Contact-Mode Triboelectric Nanogenerators As an Effective Power Source

Simiao Niu,Sihong Wang,Long Lin,Ying Liu,Yu Sheng Zhou,Youfan Hu,Zhong Lin Wang

DOI: https://doi.org/10.1039/c3ee42571a

IF: 32.5

2013-01-01

Energy & Environmental Science

Abstract:A theoretical model for contact-mode TENGs was constructed in this paper. Based on the theoretical model, its real-time output characteristics and the relationship between the optimum resistance and TENG parameters were derived. The theory presented here is the first in-depth interpretation of the contact-mode TENG, which can serve as important guidance for rational design of the TENG structure in specific applications.
Numerical Analysis and Structural Optimization of Cylindrical Grating-Structured Triboelectric Nanogenerator

Yiqun Wang,Xinzhi Liu,Zhihao Zheng,Yajiang Yin,Xiaofeng Wang,Zheng You

DOI: https://doi.org/10.1016/j.nanoen.2021.106570

IF: 17.6

2021-01-01

Nano Energy

Abstract:Triboelectric nanogenerators (TENGs) are extensively applied in the energy harvesting field owing to their advantages of low cost, diversified structural design, and superior conversion efficiency from low-frequency mechanical energy. Among them, the grating/disk-structured TENG is one of the most promising types because it can continuously provide a high output. However, owing to its complex structure, modeling simulations and structural optimization of grating-structured TENGs in freestanding mode have not been performed previously. Moreover, the influence of nonideal structural parameters such as height and parasitic capacitance on the performance is unknown. Furthermore, more advanced numerical data processing methods are expected to be proposed. In this work, we obtained the optimal grating number n and optimal average power of cylindrical grating-structured TENGs using the support vector regression algorithm and other numerical analysis methods during simulation. Subsequently, we studied the influence of the gap h between the rotor and the stator and the parasitic capacitance Cp on the performance of the grating-structured TENGs. This work can complement the previous structural optimization and simulation works on grating-structured TENGs, providing a reference for the application of machine learning to the structural optimization of TENGs.
Theoretical model and optimal output of a cylindrical triboelectric nanogenerator

Xin Guo,Jiajia Shao,Morten Willatzen,Yi Yang,Zhong Lin Wang

DOI: https://doi.org/10.1016/j.nanoen.2021.106762

IF: 17.6

2022-02-01

Nano Energy

Abstract:Conversion of mechanical energy into electricity using triboelectric nanogenerators is at the forefront of alternative energy technology. However, the advancement of accurate modeling of cylindrical TENG energy harvesting process is proceeding slowly. Previous theoretical models are built based on charged finite-sized planes which cannot be applied to more general situations where charges are distributed in complex geometric configurations. Such models are inaccurate and inadequate to describe field phenomena on a larger spatial scale. Here, a systematic theoretical analysis of a three-dimensional cylindrical triboelectric nanogenerator is presented based on expanded Maxwell’s equations which establishes a standard framework for modeling non-planar elementary geometric structures such as cones, arcs, disks, etc. Most importantly, the time- and spatial-dependent electric field and electric displacement produced by the cylindrical distribution of charges are fully unveiled, clarifying how the energy conversion mechanism is using Maxwell’s displacement current as well as allowing quantitative analyses of the power dynamics, energy output efficiency, and basic output characteristics of the cylindrical triboelectric nanogenerator. The model analysis presented in this work is helpful to improve the fundamental theory of triboelectric nanogenerators and allows constructing complex mechanical energy harvesting systems conforming accurately and more realistically to practical situations.

materials science, multidisciplinary,chemistry, physical,physics, applied,nanoscience & nanotechnology
Theoretical Investigation and Structural Optimization of Single‐Electrode Triboelectric Nanogenerators

Simiao Niu,Ying Liu,Sihong Wang,Long Lin,Yu Sheng Zhou,Youfan Hu,Zhong Lin Wang

DOI: https://doi.org/10.1002/adfm.201303799

IF: 19

2014-01-01

Advanced Functional Materials

Abstract:Single‐electrode triboelectric nanogenerators (SETENGs) significantly expand the application of triboelectric nanogenerators in various circumstances, such as touch‐pad technologies. In this work, a theoretical model of SETENGs is presented with in‐depth interpretation and analysis of their working principle. Electrostatic shield effect from the primary electrode is the main consideration in the design of such SETENGs. On the basis of this analysis, the impacts of two important structural parameters, that is, the electrode gap distance and the area size, on the output performance are theoretically investigated. An optimized electrode gap distance and an optimized area size are observed to provide a maximum transit output power. Parallel connection of multiple SETENGs with micro‐scale size and relatively larger spacing should be utilized as the scaling‐up strategy. The discussion of the basic working principle and the influence of structural parameters on the whole performance of the device can serve as an important guidance for rational design of the device structure towards the optimum output in specific applications.
Performance Optimizations and Figure-of-Merits for Freestanding Triboelectric Nanogenerators

Wenwu Zhu,Jun Peng,Ao Qin,Kanglong Yuan,Boshi Zhu,Shuai Lang,Jiliang Ma,Guangrui Wen,Xuefeng Chen

DOI: https://doi.org/10.1021/acsaelm.4c01542

IF: 4.494

2024-01-01

ACS Applied Electronic Materials

Abstract:Energy harvesting is a burgeoning strategy to salvage mechanical energy by using triboelectric nanogenerators. Various working modes and structures were recently developed as portable self-power sources for next-generation electronics, especially freestanding configurations that imply higher power output. However, the optimization principles and ultimate performance with theoretical analysis are still vague. We set up a time-varying dynamic model to clarify the electric power generation mechanism due to electrostatic induction and indicate optimal matching between input mechanical frequency and output electrical characteristics. Multiple parameters were grouped into two dimensionless parameters, predicting the maximum power density limit. Derived materials and device figure-of-merit set the criteria for material selection and structure design, clarifying that the optimized performance only depends on material surface charge density and device vibration speed. Accordingly, a rolling charge pump is designed to provide enhanced and stable charge flow to the middle metal of a sandwich-structured dielectric layer. The induced charge density on encapsulated dielectric surfaces reaches up to 60 mu C/m2, which is 30 times higher than that of common contact and separation mode. Furthermore, the inevitable parasitic capacitance is also revealed and quantified, suggesting optimal power output in practice. Experimental results prove the optimization strategies of theoretical frequency matching, charge pump design, and practical parasitic analysis, leading to a tremendous increase in power performance.
Dynamical charge transfer model for high surface charge density triboelectric nanogenerators

Xin Cui,Yaming Zhang,Gongwei Hu,Lu Zhang,Yan Zhang

DOI: https://doi.org/10.1016/j.nanoen.2020.104513

IF: 17.6

2020-01-01

Nano Energy

Abstract:Triboelectric nanogenerators have made great progress and paved the way for green energy, self-powered implantable medical devices and a large number of sensors in the Internet of Things. Maxwell's displacement current is the fundamental theoretical framework of nanogenerators. Quantum model of charge transfer between atoms have been devoted to understanding the triboelectric effect. Increasing the output power of triboelectric nanogenerators is one of the most important subjects for practical application. Here, we study the charge transfer process in triboelectric materials and propose a triboelectric material charge transfer dynamic model. Dynamic charge transfer enables triboelectric nanogenerators to achieve high surface charge density and the superior device robustness, which can significantly improve the output power and life time of triboelectric nanogenerators. The charge transfer model provides not only deeply understanding for high performance of triboelectric nanogenerator, but also a useful guide for the optimization and design of high performance triboelectric materials.
A Theoretical Approach for Optimizing Sliding-Mode Triboelectric Nanogenerator Based on Multi-Parameter Analysis

He Zhang,Chenhui Zhang,Jiwei Zhang,Liwei Quan,Haiyan Huang,Jiqing Jiang,Shurong Dong,Jikui Luo

DOI: https://doi.org/10.1016/j.nanoen.2019.04.057

IF: 17.6

2019-01-01

Nano Energy

Abstract:Optimized design of sliding-mode triboelectric nanogenerator (TENG) that is triggered by relative sliding between dielectric layers through a friction process forms one of the key focuses in this community since it may enhance the feasibility of real applications in industries. We propose here a theoretical model based on multi-parameter analysis to provide a rational optimization strategy for design of sliding mode TENG. By combining multiple parameters into dimensionless variables, the normalized output performance is expressed by virtue of two compound parameters. The scaling laws are achieved between the normalized electric output and these compound parameters, involving device dimensions (sizes, dielectric layer thickness), electrical properties of the electrode and dielectric materials, loading conditions (loading force, frequency and motor process), and the circuit conditions (open/short circuit and load resistance). The scaling laws may provide a more comprehensive and rational optimization strategy for sliding-mode TENG based on multi-parameter analysis and may help to enhance the output performance of the device as either a smart sensor or an energy harvester.
Advances in Nanostructures for High‐Performance Triboelectric Nanogenerators

Yongjiu Zou,Jing Xu,Kyle Chen,Jun Chen

DOI: https://doi.org/10.1002/admt.202000916

IF: 6.8

2021-01-27

Advanced Materials Technologies

Abstract:<p>With the rapid development of the Internet of Things (IoT) and the ongoing Fourth Industrial Revolution, the effective conversion of wasted ambient mechanical energy from the environment to generate electricity is regarded as one of the most pivotal technologies for powering widely distributed electronics in the era of the Internet of Things. Although the triboelectric nanogenerator (TENG), based on the coupling effect of contact electrification and electrostatic induction, has recently undergone a tremendous evolution with the development of various features such as flexibility, conformability, and user‐friendliness, further improvement of the output performance is still required for usage toward practical applications for the next‐generation of IoT devices. In this review article, surface nanostructure modification methods for high‐performance triboelectric nanogenerators are systematically summarized. The field is deeply reviewed, with the methods classified into four categories: templating method, appending method, etching method, and crumpling method. Finally, an in‐depth discussion of the existing challenges and the direction of future efforts for enhancing TENG output performance are clearly stated, which can contribute to promoting further development of the field.</p>

materials science, multidisciplinary
Research advances in triboelectric nanogenerators based on theoretical simulations

Wenhao Li,Yanmin Guo,Kun Wang,Shuqian Zhang,Jiawen Qiu,Junlong Li,Chan Hee Suk,Chaoxing Wu,Xiongtu Zhou,Yongai Zhang,Tailiang Guo,Tae Whan Kim

DOI: https://doi.org/10.1016/j.nanoen.2024.109724

IF: 17.6

2024-05-25

Nano Energy

Abstract:The triboelectric nanogenerator (TENG) based on the coupling effect of contact electrification and electrostatic induction, with the advantages of low cost, flexibility, and high energy conversion efficiency, is an emerging energy conversion device with prospects for broad applications in micro/nano energy, wearable devices, and self-powered sensors. The results from theoretical simulation studies of TENGs will not only lead to an understanding of the working mechanism underlying an optimized device but are also expected to guide practical applications. This article summarizes the research progress in theoretical simulations of TENGs, including the charge transfer mechanism, the optimization of device performance, the equivalent circuit of the device, and the power management circuit. That progress has also provided valuable insights into ways to improve the energy conversion efficiency and the power generation capability. We hope that this paper will be helpful to those engaged in research of TENG-related fields.

materials science, multidisciplinary,nanoscience & nanotechnology,physics, applied,chemistry, physical
A generalized model for tribovoltaic nanogenerator

Xin Guo,Jing You,Di Wei,Jiajia Shao,Zhong Lin Wang

DOI: https://doi.org/10.1063/5.0196998

IF: 15

2024-04-26

Applied Physics Reviews

Abstract:Converting mechanical energy into direct-current electric power based on the tribovoltaic effect is a typical characteristic of tribovoltaic nanogenerators (TVNGs). Although this newly discovered physics effect has been devoted to numerous research studies recently, a generalized theoretical model is still missing, thus unable to comprehensively elaborate the working principles of TVNG. Unlike previous qualitative explanations restricted to the conventional diffusion-drift theory, a new theoretical model is proposed according to classical semiconductor physics. Using the model, the governing equation of a TVNG is derived for the first time, which provides possibilities for revealing the variations of basic physical variables whether within the device or in an external circuit. The direct-current output is suggested to be the coupling of the tribovoltaic effect and contact electrification; in detail, it directly results from the movement and realignment of quasi-Fermi levels for excess carriers that are contiguous to the junction/contacting interface under non-equilibrium conditions. Moreover, an equivalent circuit model is established, equivalent to a constant current source parallel to a p–n junction diode according to the lumped parameter circuit theory. Notably, a new term, mechano-induced electric field EM, is defined and introduced to describe the impact of triboelectric charges at interfaces. Furthermore, using the COMSOL Multiphysics software, a dynamic simulation model for TVNGs is proposed, allowing the simulation and calculation of various TVNGs with different geometric constructions and charge distributions.

physics, applied
Field-circuit coupling model of triboelectric nanogenerators

Chunmei Fan,Jiajia Shao,Xin Guo,Morten Willatzen,Zhong Lin Wang

DOI: https://doi.org/10.1016/j.mtphys.2023.101124

IF: 11.021

2023-05-25

Materials Today Physics

Abstract:High-entropy energy conversion and storage based on triboelectric nanogenerators (TENGs) has attracted substantial interest in recent years. Not only a large number of theoretical models but also experimental works have been focusing on confirming optimum conditions and prediction of maximum outputs of TENGs, which is in order to enlarge power generation and energy conversion efficiency. A complete power analysis of TENG systems includes the mechanical input (mechanical port), a TENG transducer, and electrical output (electrical port). However, the relationships between the external force driving TENG and the generated instantaneous power as well as the energy flowing inside TENGs remain elusive. Here, a dynamic field-circuit coupling model composed of a quasi-electrostatic field and an external circuit is established that allows the determination of the force distribution and power flow of a TENG transducer. It is confirmed that dissipation in TENGs is entirely electrical and caused by the separation of charges distributed in contacting surfaces and metal electrodes. Importantly, in steady-state operation, all input energy is converted into electrical (useful) power unless dissipation mechanisms (mechanical and electrical). In addition, the essential factors which affect the basic output characteristics of TENGs are discussed. This work suggests a new approach to fully understanding the whole dynamic power-delivering process within TENGs which is essential for the theoretical optimization of TENG performance and practical applications of TENGs.

materials science, multidisciplinary,physics, applied
Comparative study and multi-parameter analysis to optimize device structure of triboelectric nanogenerators

Muhammad Wajahat,Abbas Z Kouzani,Sui Yang Khoo,M A Parvez Mahmud

DOI: https://doi.org/10.1088/1361-6528/acd789

IF: 3.5

2023-08-02

Nanotechnology

Abstract:Triboelectric nanogenerator is becoming one of the most efficient energy harvesting device among all mechanical energy harvesters. This device consists of dielectric friction layers and metal electrode which generates electrical charges using electrostatic induction effect. There are several factors influencing the performance of this generator which needs to be evaluated prior to experiment. The absence of a universal technique for TENG simulation makes the device design and optimization hard before practical fabrication, which also lengthens the exploration and advancement cycle and hinders the arrival of practical applications. In order to deepen the understanding the core physic behind the working process of this device, this work will provide comparative analysis on different modes of TENG. Systematic investigation on different material combination, effect of material thickness, dielectric constant and impact of surface patterning is evaluated to shortlist the best material combination. COMSOL Multiphysics simulating environment is used to design, model and analyze factor affecting the overall output performance of TENG. The stationary study in this simulator is performed using 2D geometry structure with higher mesh density. During this study short circuit and open circuit condition were applied to observe the behavior of charge and electric potential produced. This observation is analyzed by plotting charge transfer/electric potential against various displacement distances of dielectric friction layers. The ouput is then provided to load ciruitary to measure the maximum output power of the models. Overall, this study provides an excellent understanding and multi-parameter analysis on basic theoretical and simulation modeling of TENG device.
Surface Charge Density of Triboelectric Nanogenerators: Theoretical Boundary and Optimization Methodology

Chunlei Zhang,Linglin Zhou,Ping Cheng,Xing Yin,Di Liu,Xinyuan Li,Hengyu Guo,Zhong Lin Wang,Jie Wang

DOI: https://doi.org/10.1016/j.apmt.2019.100496

IF: 8.663

2020-01-01

Applied Materials Today

Abstract:Although high charge densities of triboelectric nanogenerators (TENG) were achieved by working in high vacuum or charge pumping techniques in atmosphere, owing to their complex structure and/or stability issues, it still remains a great challenge and necessity to directly obtain the high charge density directly through triboelectrification effect in atmosphere. Here, a basic theory about the limitation factors of surface charge density is comprehensively rebuilt through analytical mathematical derivation of the limitation equation. As a result, high surface charge density can be obtained directly by a new optimization methodology, i.e. using thin dielectric layer, which is demonstrated by the designed contact-separation model TENG and sliding model TENG. In addition, the theoretical models of charge decay and charge accumulation during triboelectrification process were built. This work provides not only a new facile and universal optimization methodology for TENG, but also a new insight in the triboelectrification process, both of which will prompt the applications of TENG ranging from powering electronic devices to harvesting large-scale blue energy. (C) 2019 Elsevier Ltd. All rights reserved.
Modeling and optimization of a spherical triboelectric generator

Jens Gravesen,Morten Willatzen,Jiajia Shao,Zhong Lin Wang

DOI: https://doi.org/10.1007/s12274-023-5745-4

IF: 9.9

2023-06-15

Nano Research

Abstract:A detailed geometric analysis of spherical triboelectric nanogenerators is presented. In comparison with earlier works on spherical triboelectric generators, the general case where the moving dielectric rolls on the inside surface of the larger sphere of the TENG is discussed in terms of maximum energy harvesting. An optimization analysis of geometrical parameters allows various cases of electrode geometry, either in the form of a spherical circle, spherical ellipse, spherical rectangle, or spherical isosceles trapezium, to be solved. The analytical insight and computational effective models provided by differential geometry make the mathematical model superior compared to standard three-dimensional (3D) numerical methods.

materials science, multidisciplinary,chemistry, physical,physics, applied,nanoscience & nanotechnology
Boosting output performance of contact-separation mode triboelectric nanogenerators by adopting discontinuity and fringing effect: experiment and modelling studies

Teresa Cheng,Han Hu,Navid Valizadeh,Qiong Liu,Florian Bittner,Ling Yang,Timon Rabczuk,Xiaoning Jiang,Xiaoying Zhuang

2023-10-26

Abstract:Triboelectric nanogenerators (TENGs) are promising self-powering supplies for a diverse range of intelligent sensing and monitoring devices, especially due to their capability of harvesting electric energy from low frequency and small-scale mechanical motions. Inspired by the fact that contact-separation mode TENGs with small contact areas harvest high electrical outputs due to fringing effect, this study employed discontinuity on the dielectric side of contact-separation mode TENGs to promote fringing electric fields for the enhancement of electrical outputs. The results reveal that the TENGs with more discontinuities show higher overall electric performance. Compared to pristine TENGs, the TENGs with cross discontinuities increased the surface charge by 50% and the power density by 114%. However, one should avoid generating discontinuities on tribonegative side of TENGs using metal blade within a positive-ion atmosphere due to the neutralization through electrically conductive metal blade. The computational simulation validated that the TENGs with discontinuities obtained higher electrical outputs, and further investigated the effect of discontinuity gap size and array distance on TENGs performance. This study has provided a promising method for the future design of TENGs using discontinuous structures.

Applied Physics,Materials Science
Contact-sliding-separation mode triboelectric nanogenerator

Yang Yu,Qi Gao,Xiaosong Zhang,Da Zhao,Xiao Xia,Jianlong Wang,Hengyu Li,Zhong Lin Wang,Tinghai Cheng

DOI: https://doi.org/10.1039/d3ee01290e

IF: 32.5

2023-01-01

Energy & Environmental Science

Abstract:Durability is a critical concern for triboelectric nanogenerators (TENGs) since it significantly impacts their output performance and stability. To address this issue, TENGs designed with rolling rod/ball have been developed...

energy & fuels,chemistry, multidisciplinary,engineering, chemical,environmental sciences
A review of material design for high performance triboelectric nanogenerators: performance improvement based on charge generation and charge loss

Xiaochuan Li,Qianxi Yang,Dahu Ren,Qianying Li,Huake Yang,Xuemei Zhang,Yi Xi

DOI: https://doi.org/10.1039/d4na00340c

2024-07-24

Abstract:As a type of innovative device, triboelectric nanogenerators (TENGs) are capable of converting mechanical energy into electrical energy through the triboelectric effect. Based on the working mechanism, the output performance of TENGs heavily relies on the triboelectric materials used. The modification of triboelectric materials is the most efficient way to improve the output performance of TENGs. Herein, this review focuses on the recent progress in triboelectric material design for high-performance TENGs. First, the basic theory of TENGs is introduced. Second, the relationship between the triboelectric materials and the output performance of TENGs is summarized in detail based on a theoretical model of the triboelectric charge dynamic equilibrium. Furthermore, the relevant strategies are analyzed in detail. Finally, challenges and shortcomings of the triboelectric materials for high-performance TENGs are discussed. This review provides a basis for the research status and future development of triboelectric materials.
Recent Advances of Triboelectric, Piezoelectric and Pyroelectric Nanogenerators

Xiaoxiao Dong,Zhen Yang,Jiayi Li,Wenquan Jiang,Jianmin Ren,Yanting Xu,Travis Shihao Hu,Ming Li

DOI: https://doi.org/10.1016/j.nanoso.2023.100990

2023-01-01

Nano-Structures & Nano-Objects

Abstract:Nanogenerators are widely used in harvesting and converting mechanical or thermal energy into electric energy. It is a promising way to capture energy from the surrounding environment as portable power supplies and self-powered systems, offering great versatility and feasibility. Current studies focus on designing nanogenerator structures and materials with high power outputs, multifunctionality and low-cost characteristics. In this review, we will introduce the technological advances of three common nanogenerators, namely, triboelectric, piezoelectric and pyroelectric nanogenerators. The fundamental components, including the working mechanism, structure design, materials selection and main applications, are compared and systematically discussed. Current challenges and future perspectives are highlighted with a focus on offering new insights into developing the next generation nanogenerators that are highly integrated, multifunctional and of upgraded performance.

A Theoretical Study of Grating Structured Triboelectric Nanogenerators

Theories For Triboelectric Nanogenerators: A Comprehensive Review

Theory of Sliding-Mode Triboelectric Nanogenerators

Theoretical Study of Contact-Mode Triboelectric Nanogenerators As an Effective Power Source

Numerical Analysis and Structural Optimization of Cylindrical Grating-Structured Triboelectric Nanogenerator

Theoretical model and optimal output of a cylindrical triboelectric nanogenerator

Theoretical Investigation and Structural Optimization of Single‐Electrode Triboelectric Nanogenerators

Performance Optimizations and Figure-of-Merits for Freestanding Triboelectric Nanogenerators

Dynamical charge transfer model for high surface charge density triboelectric nanogenerators

A Theoretical Approach for Optimizing Sliding-Mode Triboelectric Nanogenerator Based on Multi-Parameter Analysis

Advances in Nanostructures for High‐Performance Triboelectric Nanogenerators

Research advances in triboelectric nanogenerators based on theoretical simulations

A generalized model for tribovoltaic nanogenerator

Field-circuit coupling model of triboelectric nanogenerators

Comparative study and multi-parameter analysis to optimize device structure of triboelectric nanogenerators

Surface Charge Density of Triboelectric Nanogenerators: Theoretical Boundary and Optimization Methodology

Modeling and optimization of a spherical triboelectric generator

Boosting output performance of contact-separation mode triboelectric nanogenerators by adopting discontinuity and fringing effect: experiment and modelling studies

Contact-sliding-separation mode triboelectric nanogenerator

A review of material design for high performance triboelectric nanogenerators: performance improvement based on charge generation and charge loss

Recent Advances of Triboelectric, Piezoelectric and Pyroelectric Nanogenerators