Nonmetal P-doped Hematite Photoanode with Enhanced Electron Mobility and High Water Oxidation Activity

Yuchao Zhang,Shiqi Jiang,Wenjing Song,Peng Zhou,Hongwei Ji,Wanhong Ma,Weichang Hao,Chuncheng Chen,Jincai Zhao

DOI: https://doi.org/10.1039/c4ee03803g

2015-01-01

Abstract:Nonmetal P-doped hematite photoanodes with remarkably improved photocurrent densities were synthesized. The high activity is attributed to the enhanced electron mobility.

What problem does this paper attempt to address?

Ti, Zn Co-Doped Hematite Photoanode for Solar Driven Photoelectrochemical Water Oxidation

Quansong Zhu,Chunlin Yu,Xingwang Zhang

DOI: https://doi.org/10.1016/j.jechem.2018.10.012

IF: 13.1

2018-01-01

Journal of Energy Chemistry

Abstract:Although there have been many reports of metal doping to ameliorate the drawbacks of hematite as the photoanode for water oxidation, most of them focused on monometallic doping, and only a few of them payed attention to bimetallic doping. What is worse, the synergetic mechanism between two metal dopants was not sufficiently studied, especially the density functional theory(DFT) calculation. In this work, the n-type hematite was synthesized by introducing Ti dopant into hematite through the hydrothermal method, and dipping-sintering treatment was employed to further introduce homogeneously dispersed Zn dopant into that, forming the Ti, Zn co-doped hematite. Under the optimal condition, Tidoped hematite photoanode reached approximately 2-times enhancement of the photocurrent density compared with the pristine one at 1.23 V vs. RHE, while Ti, Zn co-doped hematite anode obtained another25% elevation. UV–Vis spectroscopy, Mott–Schottky plots, EIS analysis, photo-oxidation of hole scavenger(H 2 O 2 ), and DFT calculation were employed to understand the role of Ti, Zn dopant. Based on the obtained results, the synergetic mechanism of two dopants was discussed, i.e., the improvement of PEC performance of Ti, Zn co-doped hematite photoanode was possibly attributed to greater carrier density and improved charge separation efficiency at the surface of hematite. This work provides new strategy and understanding of the improvement of PEC performance of hematite by doping engineering.
Photoelectrochemical water oxidation performance promoted by a cupric oxide-hematite heterojunction photoanode

Changqing Zhu,Changli Li,Xiao Miao,Ling Zhao,Zhiyu Wang,Jean-Jacques Delaunay

DOI: https://doi.org/10.1016/j.ijhydene.2020.09.091

IF: 7.2

2020-11-01

International Journal of Hydrogen Energy

Abstract:Hematite is a promising material for photoelectrochemical (PEC) water oxidation due to its narrow bandgap and chemical stability in alkaline electrolytes. However, the PEC performance of hematite is known to be inhibited by a short carrier diffusion length and slow kinetics for the oxygen evolution process. The rational control of morphology, crystallinity, and interfacial charge transfer plays an important role in tuning the PEC performance of α-Fe2O3 photoelectrodes. In this study, different iron oxide nano/microstructures are synthesized by the sintering of iron sheets in air at different temperatures. The synergetic effect of the surface morphology and crystallinity on the photocurrent and onset potential of the photoanode is investigated. The coral-like structure with high index (104) facets prepared at a high temperature shows a decreased onset potential, suggesting a strong correlation between the onset potential and crystalline orientation. To further improve the photocurrent density of this hematite photoanode, cupric oxide-hematite heterostructures are explored. An obvious improvement in the photocurrent density is observed from 1.1 to 1.6 V. The resulting α-Fe2O3/CuO photoanode exhibits a photocurrent density of 1.5 mA cm−2 at 1.6 V, 25% higher than that of the pristine hematite. The Mott-Schottky plot and EIS measurement indicate that the α-Fe2O3/CuO heterojunction facilitates the extraction of the accumulated holes in the hematite through a type-II band alignment and the CuO can serve as a catalyst for promoting the oxygen evolution reaction.

energy & fuels,electrochemistry,chemistry, physical
Insights into Improving Photoelectrochemical Water‐Splitting Performance Using Hematite Anode

Hemam Rachna Devi,Boon Chong Ong,Xin Zhao,Zhilli Dong,Karuna Kar Nanda,Zhong Chen

DOI: https://doi.org/10.1002/ente.202100457

IF: 4.149

2021-08-21

Energy Technology

Abstract:Designing an efficient photoanode is of great importance for photoassisted solar water splitting. Herein, a series of modifications to a nanorod structure hematite, to be used as anode for photoelectrochemical (PEC) water-splitting reactions is designed. Ti doping, oxygen vacancy formation by N2 treatment, TiO2 passivation, and FeOOH cocatalyst decoration are explored for their roles and contributions to the improvement of the PEC water oxidation performance. It is found that Ti doping and N2 treatment can greatly increase the charge carrier density, which has boosted the photocurrent. TiO2 passivation enhances the photovoltage, resulting in a cathodic shift in the onset potential (≈170 mV with respect to prepassivation). Further, the FeOOH cocatalyst decoration improves the reaction kinetics, thereby improving the overall photoassisted water oxidation performance.

energy & fuels
Enhanced Water Oxidation of Hematite Photoanodes via Localized n‐p Homojunctions Induced by Gradient Zn2+ Doping

Hai‐Chao Wang,Hua‐Min Li,Tao Yang,Jun‐Wei Ji,Xin‐Zheng Yue,Qing‐Chao Liu,Sha‐Sha Yi,Yongfa Zhu

DOI: https://doi.org/10.1002/adfm.202406545

IF: 19

2024-06-06

Advanced Functional Materials

Abstract:A gradient doping engineering strategy is initially conceived to construct localized n‐p homojunctions at the surface of Fe2O3 photoanode, which exhibits superior water oxidation performance. This highly enhanced photoelectrochemical (PEC) performance can be primarily attributed to the efficient charge transfer and separation mechanisms facilitated by the robust internal electric field within Fe2O3 photoanode. Constructing an internal electric field (IEF) within the hematite (Fe2O3) photoanode for highly efficient water oxidation performance with facilitated charge transfer and separation remains still a significant challenge. Unlike the conventional approach of creating interfacial electric fields through heterojunction design by introducing another semiconductor, a novel strategy is proposed for engineering localized n‐p homojunctions on the surface of Fe2O3 photoanode using gradient Zn2+ doping strategy. By implementing this approach, the inherent n‐type characteristics of Fe2O3 can be transformed into p‐type, thereby facilitating the formation of an n‐p junction with robust IEF, which enables more efficient charge separation and transfer. Additionally, the gradient Zn2+ doping is accompanied by the generation of oxygen vacancies, which further improves the charge transfer efficiency and accelerates water oxidation kinetics. As expected, the photocurrent density of optimized Fe2O3 photoanode at 1.23 V versus reversible hydrogen electrode is ≈2.6‐fold that of Fe2O3. This work provides a novel perspective on the design of localized n‐p homojunction within photoanodes for achieving high solar energy conversion efficiency.

materials science, multidisciplinary,nanoscience & nanotechnology,physics, applied,chemistry, physical, condensed matter
New Findings for the Much‐Promised Hematite Photoanodes with Gradient Doping and Overlayer Elaboration

Kai-Hang Ye,Peng Hu,Kuiliang Liu,Songtao Tang,Duan Huang,Zhan Lin,Shanqing Zhang,Yongchao Huang,Hongbing Ji,Shihe Yang

DOI: https://doi.org/10.1002/solr.202100701

IF: 9.1726

2022-01-01

Solar RRL

Abstract:Herein, it is demonstrated that gradient Ti doping coupled with an overlayer of NiFeOx on hematite can markedly improve the photoelectrochemical (PEC) water‐splitting efficiency of hematite‐based photoanodes, which are prized from sustainability considerations but have met daunting challenges. First, the gradient Ti doping of hematite has effectively lowered the onset potential while maintaining the high efficiency of photo‐generated charge separation and transmission. Second, the NiFeOx layer not only substantially reduces the surface trap states, but also significantly enhances the oxygen evolution kinetics of hematite‐based photoanodes as an oxygen evolution catalyst, resulting in a further improvement of the onset potential. Consequently, with the TiO2 layer and a double electrode stack design, a remarkable photocurrent density of 4.49 mA cm−2 is achieved at 1.23 V versus reversible hydrogen electrode (RHE) for NiFeOx/(Grad Ti)‐Fe2O3/TiO2 photoanode without any hole scavenger, delivering a high applied bias photo‐to‐current efficiency of up to 0.58% at 1 V versus RHE. This multipronged attack for improving PEC water‐splitting efficiency revitalizes the great promise of hematite photoanodes and sheds light on the design and development of the next‐generation photoelectrodes.
Engineered Sn- and Mg-doped hematite photoanodes for efficient photoelectrochemical water oxidation

Jiajia Cai,Hao Chen,Cunxing Liu,Shuaiqi Yin,Haijin Li,Liangcheng Xu,Hao Liu,Qian Xie

DOI: https://doi.org/10.1039/c9dt03962g

2020-08-18

Abstract:A feasible and cost-effective method was developed to improve the photoelectrochemical performance of the hematite (α-Fe2O3) photoanode. Using a hydrothermal method, tin (Sn) and magnesium (Mg) (co-)doped hematite films were prepared and characterized by X-ray diffraction (XRD), X-ray photon spectroscopy (XPS), and Raman spectroscopy. The average particle size of the α-Fe2O3 film varied from 150 to 300 nm. The photocurrent density of Sn-/Mg-co-doped α-Fe2O3 reached a maximum of 1.1 mA cm-2 at 1.23 VRHE, which increased approximately 3 times compared to that of pristine α-Fe2O3. It also yielded a maximum applied bias photon-to-current efficiency (ABPE) of 0.09% at 1.08 V vs. RHE. The excellent PEC activity could be attributed to Mg co-doping relieving the lattice distortion caused by Sn doping, and improving both the charge injection efficiency and charge separation efficiency without obviously changing the carrier concentration, which was proved by electrochemical impedance spectroscopy. This promising co-doping strategy could also be extended to other candidatephotoelectrodes.
N and Sn Co-Doped hematite photoanodes for efficient solar water oxidation

Tinting Jiao,Cheng Lu,Kun Feng,Jiujun Deng,Dan Long,Jun Zhong

DOI: https://doi.org/10.1016/j.jcis.2020.10.045

IF: 9.9

2021-03-01

Journal of Colloid and Interface Science

Abstract:Surface electron-hole recombination and low conductivity have significantly hindered the photoelectrochemical water oxidation performance of hematite. Here we report a surface N and Sn co-incorporation in hematite for efficient water oxidation, which shows a greatly enhanced photocurrent density of 2.30 mA/cm2 at 1.23 V vs. RHE when compared to the pristine hematite (0.89 mA/cm2). Moreover, after the subsequent loading of Co-Pi cocatalyst, a further improved photocurrent density of 2.80 mA/cm2 at 1.23 V vs. RHE can also be achieved. The excellent performance can be attributed to the synergistic effect of N and Sn in hematite, in which the surface Sn-doping could increase the donor density of hematite while the N-incorporation could adjust the amount of Sn in hematite to suppress the surface charge recombination and further increase the donor density. To the best of our knowledge, it should be the first report to reveal the synergistic effect of non-metal element N and metallic element Sn in hematite for high performance, which could be a feasible way towards the development of efficient hematite photoanodes.

chemistry, physical
Modulating Charge Transfer Efficiency of Hematite Photoanode with Hybrid Dual‐Metal–Organic Frameworks for Boosting Photoelectrochemical Water Oxidation

Keke Wang,Yang Liu,Kenta Kawashima,Xuetao Yang,Xiang Yin,Faqi Zhan,Min Liu,Xiaoqing Qiu,Wenzhang Li,Charles Buddie Mullins,Jie Li

DOI: https://doi.org/10.1002/advs.202002563

IF: 15.1

2020-10-25

Advanced Science

Abstract:The glorious charge transfer efficiency of photoanode is an important factor for efficient photoelectrochemical (PEC) water oxidation. However, it is often limited by slow kinetics of oxygen evolution reaction. Herein, a dual transition metal‐based metal–organic frameworks (MOF) cocatalyst, Fe@Ni–MOF, is introduced into a titanium‐doped hematite (Fe2O3:Ti) photoanode. The combination of Ni and Fe can optimize the filling of 3d orbitals. Moreover, the introduction of Fe donates electrons to Ni in the MOF structure, thus, suppressing the irreversible (long‐life‐time) oxidation of Ni2+ into Ni3+. The resulting Fe@Ni–MOF/Fe2O3:Ti photoanode exhibits ∼threefold enhancement in the photocurrent density at 1.23 V versus the reversible hydrogen electrode. Kinetic analysis of the PEC water oxidation processes indicates that this performance improvement is primarily due to modulating the charge transfer efficiency of hematite photoanode. Further results show that a single transition metal‐based MOF cocatalyst, Ni–MOF, exhibits slow charge transfer in spite of a reduction in surface charge recombination, resulting in a smaller charge transfer efficiency. These findings provide new insights for the development of photoelectrodes decorated with MOFs.

materials science, multidisciplinary,nanoscience & nanotechnology,chemistry
Enhanced photoelectrochemical water oxidation in Hematite: Accelerated charge separation with Co doping

Jiajia Cai,Hao Liu,Cunxing Liu,Qian Xie,Liangcheng Xu,Haijin Li,Jiansheng Wang,Song Li

DOI: https://doi.org/10.1016/j.apsusc.2021.150606

IF: 6.7

2021-12-01

Applied Surface Science

Abstract:Hematite (α-Fe2O3) is one of the most promising candidates for a photoanode for photoelectrochemical water splitting. However, it has low efficiency because of poor conductivity in the bulk and sluggish oxygen evolution (OER) kinetics on the surface. In this study, a Co-doped α-Fe2O3 photoanode was prepared by the hydrothermal method. It had increased charge separation efficiency and accelerated surface reaction kinetics simultaneously. At the optimal Co content, the photocurrent density of the Co-doped α-Fe2O3 increased by 23 times to 0.54 mA/cm2 at 1.23 VRHE in 1 M NaOH electrolyte; this increase was attributed to the improvement in carrier density and charge transfer behavior. Moreover, the cathodic shift of onset potential for Co-doped α-Fe2O3 reached 290 mV owing to the accelerated OER kinetics. This work reveals the key roles of Co doping and provides a suitable photoanode for solar hydrogen technology.

chemistry, physical,physics, applied, condensed matter,materials science, coatings & films
Tuning Orientation of Doped Hematite Photoanodes for Enhanced Photoelectrochemical Water Oxidation

Song Li,Jiajia Cai,Yinglei Liu,Meiqi Gao,Feng Cao,Gaowu Qin

DOI: https://doi.org/10.1016/j.solmat.2017.12.028

IF: 6.9

2017-01-01

Solar Energy Materials and Solar Cells

Abstract:The limited conductivity in hematite has been currently considered as a critical bottleneck in improving the efficiency of solar-driven water oxidation. Here we shed light on the improvement of carrier conductivity by combing orientation control and transition metal doping. To rule out the influence of surface facets of hematite when adjusting the film orientation, the hematite photoanode films were fabricated by assembling the spherical particles with single crystalline nature. The doped hematite particles were aligned with (001) plane normal to the substrate by a magnetic field (MF) during the drop-casting process. A considerable improvement in photocurrent density was resulted from the orientation control, which is due to the increased carrier density from Sn doping and efficient charge transportation in the (001) plane observed through electrochemical impedance spectra.
Hematite photoanode modified with inexpensive hole-storage layer for highly efficient solar water oxidation

Xiaolin He,Chaoqun Shang,Qingguo Meng,Zhihong Chen,Mingliang Jin,Lingling Shui,Yongguang Zhang,Zhang Zhang,Mingzhe Yuan,Xin Wang,Krzysztof Kempa,Guofu Zhou

DOI: https://doi.org/10.1088/1361-6528/ab8e74

IF: 3.5

2020-08-26

Nanotechnology

Abstract:Hematite is recognized as an excellent photocatalyst for photoelectrochemical photoanodes for water oxidation because of its favorable band gap, excellent anti-photocorrosion and structural stability in alkaline solution. However, slow charge transport and fast carrier recombination in the bulk and at the hematite photoanode/electrolyte interface, have limited its applications for water splitting. Herein, we report a highly efficient hematite/ferrhydrite core-shell photoanode system, consisting of a hematite (α-Fe2O3) semiconductor nanorods which dramatically enhance light harvesting, and ferrhydrite as the hole-storage shell. Our integrated hematite/ferrhydrite core-shell photoanode shows 2.7 times increased photo-current density under simulated sun light irradiation.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology
Titanium Doped Nanoporous Hematite Photoanode Modified with NiFeCoAlOOH Nanoparticles for Efficient Photoelectrochemical Water Splitting

Antony Charles Minja,Taotao Wang,Hongyun Cao,Pingwu Du

DOI: https://doi.org/10.1063/1674-0068/cjcp2104071

IF: 1.09

2023-01-01

Chinese Journal of Chemical Physics

Abstract:Herein, we present the decoration of NiFeCoAlOOH nanoparticles onto titanium doped nanoporous hematite (Ti-PH) utilizing a simple electroless ligand-controlled oxidation method for photoelectrochemical water splitting. Owing to the improved oxygen evolution reaction kinetics and reduced charge transfer resistance, the resulting Ti-PH/NiFeCoAlOOH photoanode presents an excellent photocurrent density of 2.46 mA/cm2 at 1.23 V vs. RHE and good stability compared to Ti-PH or bare hematite. Furthermore, the onset potential of the photocurrent density is shifted cathodically by ∼60 mV with reference to the titanium doped nanoporous hematite. This work offers a promising method for designing high-performance, stable, and inexpensive catalysts for photoelectrochemical applications.
Interface Engineering of CoFe-LDH Modified Ti: α-Fe2O3 Photoanode for Enhanced Photoelectrochemical Water Oxidation

Yue Chang,Minmin Han,Yehui Ding,Huiyun Wei,Dawei Zhang,Hong Luo,Xiaogang Li,Xiongbo Yan

DOI: https://doi.org/10.3390/nano13182579

IF: 5.3

2023-09-18

Nanomaterials

Abstract:Effectively regulating and promoting the charge separation and transfer of photoanodes is a key and challenging aspect of photoelectrochemical (PEC) water oxidation. Herein, a Ti-doped hematite photoanode with a CoFe-LDH cocatalyst loaded on the surface was prepared through a series of processes, including hydrothermal treatment, annealing and electrodeposition. The prepared CoFe-LDH/Ti:α-Fe2O3 photoanode exhibited an outstanding photocurrent density of 3.06 mA/cm2 at 1.23 VRHE, which is five times higher than that of α-Fe2O3 alone. CoFe-LDH modification and Ti doping on hematite can boost the surface charge transfer efficiency, which is mainly attributed to the interface interaction between CoFe-LDH and Ti:α-Fe2O3. Furthermore, we investigated the role of Ti doping in enhancing the PEC performance of CoFe-LDH/Ti:α-Fe2O3. A series of characterizations and theoretical calculations revealed that, in addition to improving the electronic conductivity of the bulk material, Ti doping also further enhances the interface coupling of CoFe-LDH/α-Fe2O3 and finely regulates the interfacial electronic structure. These changes promote the rapid extraction of holes from hematite and facilitate charge separation and transfer. The informative findings presented in this work provide valuable insights for the design and construction of hematite photoanodes, offering guidance for achieving excellent performance in photoelectrochemical (PEC) water oxidation.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology,chemistry
Dual-doping in the bulk and the surface to ameliorate the hematite anode for photoelectrochemical water oxidation

Tong Wang,Lili Gao,Peng Wang,Xuefeng Long,Huan Chai,Feng Li,Jun Jin

DOI: https://doi.org/10.1016/j.jcis.2022.04.080

IF: 9.9

2022-04-01

Journal of Colloid and Interface Science

Abstract:Aiming at the drawbacks of hematite like poor conductivity and tardy oxidation kinetics, herein, we utilized dual dopants in the bulk and surface to ameliorate the situation. Specifically, doping optimal amount of Zr4+ in the hematite (Zr:Fe2O3) enhances the conductivity of hematite due to the higher charge carrier density. Further, F:FeOOH could form p-n heterojunction in bulk where a potential barrier is built up that repels electrons but prompts holes transferring to F:FeOOH for water oxidation. What's more, the high electronegative of F- would withdraw electron from the Fe site in FeOOH, and the enhanced positive electricity of Fe3+ is beneficial for adsorption of OH- as well as enhance the conductivity of FeOOH to expedite holes transfer. As a result, the composite photoanode (F:FeOOH/Zr:Fe2O3) shows a 3.25-times enhanced photocurrent density comparing with α-Fe2O3. The special designation employs ultrathin F:FeOOH to act as both p-type semiconductor and efficient co-catalyst, avoiding redundant layer that would extend the migration distance of holes. On the top of that, the dual modification approach provides an extensive prospect for the further application of hematite.

chemistry, physical
Enhanced Bulk and Interfacial Charge Transfer Dynamics for Efficient Photoelectrochemical Water Splitting: the Case of Hematite Nanorod Arrays.

Jian Wang,Bo Feng,Jinzhan Su,Liejin Guo

DOI: https://doi.org/10.1021/acsami.6b07723

IF: 9.5

2016-01-01

ACS Applied Materials & Interfaces

Abstract:Charge transport in the bulk and across the semiconductor/electrolyte interface is one of the major issues that limits photoelectrochemical (PEC) performance in hematite photoelectrodes. Efficient charge transport in the entire hematite is of great importance to obtaining high photoelectrochemical properties. Herein, to reach this goal, we employed both TiO2 underlayer and overlayer deposition on hematite nanorod films, followed by a fast annealing treatment. The TiO2 underlayer and overlayer not only serve as dopant sources for carrier density increase but also reduce charge recombination at the fluorine-doped tin oxide (FTO)/hematite interface and accelerate charge transfer across the hematite/electrolyte interface. This synergistic doping and interface modifying effects give rise to an enhanced photoelectrochemical water oxidation performance of hematite nanorod arrays, generating an impressive photocurrent density of 1.49 mA cm(-2) at 1.23 V vs RHE. This is the first report on using both underlayer and overlayer modification with the same material to improve charge transport through the entire electron transport path in hematite, which provides a novel way to manipulate charge transfer across the semiconductor interface for a high-performance photoelectrode.
Enhanced Photoelectrochemical Water Oxidation Performance of Fe2o3 Nanorods Array by S Doping

Rong Zhang,Yiyu Fang,Tao Chen,Fengli Qu,Zhiang Liu,Gu Du,Abdullah M. Asiri,Tao Gao,Xuping Sun

DOI: https://doi.org/10.1021/acssuschemeng.7b01799

IF: 8.4

2017-01-01

ACS Sustainable Chemistry & Engineering

Abstract:As a promising candidate for photoelectrochemical (PEC) water oxidation, the photoelectrochemical water splitting efficiency of hematite (Fe2O3) is limited by its low electron mobility. In this work, we report a new strategy for great enhancement of PEC water oxidation activity on Fe2O3. The S-doped Fe2O3 (S:Fe2O3) nanorods array on a Ti plate shows a substantially increased photocurrent density of 1.42 mA cm(-2) at 1.23 V vs RHE in 1.0 M NaOH under simulated sunlight irradiation (AM 1.5G, 100 mW cm(-2)), 2.45 times that of Fe2O3 counterpart (0.58 mA cm(-2)). Both density functional theory calculations and Energy(eV) verify that the superior activity is contributed to the enhanced electron mobility after S doping. This study offers an attractive photoanode in water-splitting devices for solar hydrogen production application.
Hematite homojunctions without foreign element doping for efficient and stable overall water splitting

Qing Yu,Xianguang Meng,Li Shi,Guigao Liu,Peng Li,Jinhua Ye

DOI: https://doi.org/10.1039/C6RA13060G

IF: 4.036

2016-01-01

RSC Advances

Abstract:A new strategy to prepare a hematite homojunction photoanode is proposed in this work. Hematite films with different Fermi levels are obtained by tuning the carrier concentrations in the films. This enables us to fabricate hematite homojunction photoelectrodes without foreign element doping by constructing bilayer films with different Fermi levels, and realize enhanced photoelectric conversion efficiency for highly efficient solar water splitting. The photocurrent density for the hematite homojunction is ∼1.1 mA cm−2 at 1.23 V vs. RHE, which is almost 5 times that of single type hematite photoanodes. What is more, with this homojunction configuration, the hematite homojunctions show a 15 times higher stability compared with high-donor-concentration Fe2O3 photoelectrodes for oxygen evolution. Most importantly, overall water splitting is realized and the photocell still holds 92.2% of the efficiency for water oxidation even after 73 hours.
Inducing Hollow and Porous Hematite Nanorod Photoanodes by Rare Earth and Transition Metal Doping for Enhanced Solar Water Splitting

Hemin Zhang,Chenyang Xu,Hongxin Wang,Ke Liang,Yuanming Zhang,Weicong Li

DOI: https://doi.org/10.1039/d4ta01258e

IF: 11.9

2024-05-02

Journal of Materials Chemistry A

Abstract:Hematite serves as a promising photoanode material in photoelectrochemical (PEC) water splitting systems. However, its inherent limitations of short hole diffusion length and insufficient carrier lifetime pose a significant challenge for practical application. Here, we report a hollow and porous hematite nanorod photoanode by hybrid microwave annealing induced rare earth europium (Eu) and transition metal niobium (Nb)-doped core/shell FeOOH nanorods synthesized by a two-step hydrothermal method, which enhances photocurrent density (Jph) and reduces turn-on voltage (Von) simultaneously by three synergistic effects: i) hollow and porous nanorod formation to shorten hole diffusion distance; ii) surface asymmetric oxygen vacancies and Eu3+↔Eu2+ states to generate highly active sites; and iii) suppression of surface segregation of Nb and Sn to reduce surface states. As a result, the hollow and porous Eu, Nb co-doped Fe2O3 photoanode loaded with RuFe2(OH)x cocatalyst, achieves a Jph of 3.49 mA cm–2 and a low Von of 0.67 VRHE under simulated 1 sun irradiation (100 mW cm–2), which shows 2 times higher Jph and a lower Von of ⁓250 mV than that of Nb:Fe2O3. This work demonstrates the successful combination of two-step hydrothermal method, rare earth and transition metal co-doping, and hybrid microwave annealing to design and construct efficient nanorod-based photoanodes.

materials science, multidisciplinary,chemistry, physical,energy & fuels
Modification of Ti-doped Hematite Nanowires with a NiOx Buffer Layer for Improved Photoelectrochemical Performance

Yubin Chen,Fei Lv,Hongyu Xia,Xiaoya Xu,Jinzhan Su,Shaohua Shen

DOI: https://doi.org/10.1063/5.0061734

IF: 4

2021-01-01

Applied Physics Letters

Abstract:Hematite (α-Fe2O3) is a promising photoanode material for photoelectrochemical (PEC) water splitting due to its appropriate bandgap, good stability, and earth-abundance. However, the poor charge transfer property and sluggish kinetics of water oxidation limit the PEC performance of α-Fe2O3 photoanodes. Herein, a thin NiOx buffer layer was introduced between the Ti doped α-Fe2O3 (Fe2O3-Ti) layer and the fluorine-doped tin oxide (FTO) substrate without affecting the nanowire morphology and light absorption property of Fe2O3-Ti. This buffer layer can apparently suppress the charge recombination by mitigating the lattice mismatching between the Fe2O3-Ti film and the FTO substrate. In addition, the good conductivity of the NiOx film from the non-stoichiometric composition is also beneficial to the charge transfer. As a consequence, the photocurrent density was greatly improved by adding the NiOx layer in the Fe2O3-Ti photoanode, reaching 1.32 mA·cm−2 at 1.23 VRHE without any co-catalyst and sacrificial agent. This work gives a detailed analysis of the back contact in the hematite-based photoanode and provides an effective strategy for underlayer interface optimization.
Tubular Morphology Preservation and Doping Engineering of Sn/P-codoped Hematite for Photoelectrochemical Water Oxidation

Shi-Fang Duan,Yuan-Yuan Geng,Xiao-Bo Pan,Xiao-Qiang Yao,Yi-Xin Zhao,Xin Li,Chun-Lan Tao,Dong-Dong Qin

DOI: https://doi.org/10.1039/c8dt03959c

IF: 4

2019-01-01

Dalton Transactions

Abstract:Tubular hematite with high-concentration, uniform doping is regarded as a promising material for photoelectrochemical water oxidation. However, the high-temperature annealing commonly used for activating doped hematite inevitably causes deformation of the tubular structure and an increase in the trap states. In the present work, Sn-doped tubular hematite on fluorine-doped tin oxide (FTO) is successfully obtained at 750 °C from a Sn-coated FeOOH tube precursor. Sn/P codoping, which is rarely considered for hematite, is also achieved via a gas phase reaction in phosphide atmosphere. The tubular morphology allows the dopant to diffuse from both the inner and outer surfaces, thus decreasing the doping profile in the radial direction. The even distribution of Sn and P synergetically increases the carrier density of hematite by one order of magnitude, which shortens the width of the depletion layer to ca. 2.3 nm (compared with 19.3 nm for the pristine sample) and leads to prolonged carrier lifetime and efficient charge separation. In addition, this codoping protocol does not introduce additional surface trap states, as evidenced by the increased charge injection efficiency and surface kinetic analysis using intensity modulated photocurrent spectroscopy (IMPS). As a result, the morphology- and doping-engineered hematite exhibits photocurrents of 0.9 mA cm-2 at 1.23 V and 3.8 mA cm-2 at 2.0 V vs. RHE under AM 1.5 G illumination (100 mW cm-2) in 1.0 M NaOH, representing 4.5-fold and 4.8-fold enhancements, respectively, compared with the photocurrents of undoped hematite. The present method is shown to be effective for preparing multi-element-doped hematite nanotubes and may find broad application in the development of other nanotubular photoelectrodes with or without doping for efficient and robust water oxidation.

Nonmetal P-doped Hematite Photoanode with Enhanced Electron Mobility and High Water Oxidation Activity

Ti, Zn Co-Doped Hematite Photoanode for Solar Driven Photoelectrochemical Water Oxidation

Photoelectrochemical water oxidation performance promoted by a cupric oxide-hematite heterojunction photoanode

Insights into Improving Photoelectrochemical Water‐Splitting Performance Using Hematite Anode

Enhanced Water Oxidation of Hematite Photoanodes via Localized n‐p Homojunctions Induced by Gradient Zn2+ Doping

New Findings for the Much‐Promised Hematite Photoanodes with Gradient Doping and Overlayer Elaboration

Engineered Sn- and Mg-doped hematite photoanodes for efficient photoelectrochemical water oxidation

N and Sn Co-Doped hematite photoanodes for efficient solar water oxidation

Modulating Charge Transfer Efficiency of Hematite Photoanode with Hybrid Dual‐Metal–Organic Frameworks for Boosting Photoelectrochemical Water Oxidation

Enhanced photoelectrochemical water oxidation in Hematite: Accelerated charge separation with Co doping

Tuning Orientation of Doped Hematite Photoanodes for Enhanced Photoelectrochemical Water Oxidation

Hematite photoanode modified with inexpensive hole-storage layer for highly efficient solar water oxidation

Titanium Doped Nanoporous Hematite Photoanode Modified with NiFeCoAlOOH Nanoparticles for Efficient Photoelectrochemical Water Splitting

Interface Engineering of CoFe-LDH Modified Ti: α-Fe2O3 Photoanode for Enhanced Photoelectrochemical Water Oxidation

Dual-doping in the bulk and the surface to ameliorate the hematite anode for photoelectrochemical water oxidation

Enhanced Bulk and Interfacial Charge Transfer Dynamics for Efficient Photoelectrochemical Water Splitting: the Case of Hematite Nanorod Arrays.

Enhanced Photoelectrochemical Water Oxidation Performance of Fe2o3 Nanorods Array by S Doping

Hematite homojunctions without foreign element doping for efficient and stable overall water splitting

Inducing Hollow and Porous Hematite Nanorod Photoanodes by Rare Earth and Transition Metal Doping for Enhanced Solar Water Splitting

Modification of Ti-doped Hematite Nanowires with a NiOx Buffer Layer for Improved Photoelectrochemical Performance

Tubular Morphology Preservation and Doping Engineering of Sn/P-codoped Hematite for Photoelectrochemical Water Oxidation