Effects of integrated process of flattening and densification on the gradient structure and properties of Moso Bamboo
Yu Luan,Yuting Yang,Lin Chen,Yifan Ma,Menghong Jiang,Benhua Fei,Huanrong Liu,Xinxin Ma,Xiubiao Zhang,Fengbo Sun,Changhua Fang
DOI: https://doi.org/10.1016/j.conbuildmat.2023.132073
IF: 7.4
2023-06-09
Construction and Building Materials
Abstract:Bamboo is an appealing source of engineering materials due to its renewability and sustainability. However, the traditional method of processing bamboo splits using four-side planing leads to a very low utilization rate of bamboo materials. Additionally, the non-uniform structure of the bamboo culm wall results in a concentration of higher density towards the outer part and a gradual decrease towards the inner part. To address these issues, this study proposes an effective and environmentally friendly method that combines flattening and densification to modify the heterogenous structure and enhance the properties of natural bamboo. Natural bamboo splits with a moisture content of 70 % were compressed by 44 % along the radial direction of culm wall for 20 min at temperatures of 170 °C and 190 °C, respectively. The gradient characteristics of modified bamboo including microstructure, density, and mechanical properties were investigated for the first time to explore the effect of flattening and densification on the heterogenous bamboo material. After modification, the parenchyma tissues were collapsed, the fiber bundle fraction increased, and the differences in lumen size and fiber fraction between the outer and the inner parts of bamboo splits decreased. The density of the inner part of bamboo splits was tremendously increased to over 1.0 g/cm 3 and was consistent with that of the outer part. The tensile and bending properties across the gradient were significantly improved, and the weaker section was reinforced and possessed a strength equivalent to the sturdy part of natural bamboo. Furthermore, the tensile and bending properties of full-thickness bamboo splits were improved, and the change in stress distribution led to a stable structure replacing the previously vulnerable structure.
construction & building technology,materials science, multidisciplinary,engineering, civil