Influence of Oblique Sputtering on Stripe Magnetic Domain Structure and Magnetic Anisotropy of CoFeB Thin Films
Ma Xiaoqin,Zhan Qingfeng,Li Jincai,Liu Qingfang,Wang Baomin,Li Runwei
DOI: https://doi.org/10.11900/0412.1961.2017.00492
IF: 1.797
2018-01-01
ACTA METALLURGICA SINICA
Abstract:Magnetic anisotropy is one of the most important fundamental properties of magnetic thin film. The strength of magnetic anisotropy determines the ferromagnetic resonance frequency of magnetic films in the high-frequency applications. Because of the directionality of conventional static magnetic anisotropy in magnetic film, the high-frequency device usually shows an obvious directionality. When the microwave magnetic fi eld deviates from the perpendicular direction of magnetic anisotropy, the devices cannot reveal their best performance. The magnetic film with a stripe magnetic domain structure displays an in-plane rotatable magnetic anisotropy, which can be an important strategy to solve the problem of magnetic fi eld orientation dependent performance in high-frequency device. Therefore, the magnetic domain, the magnetic anisotropy, and the high-frequency behaviors for magnetic fi lms with a stripe magnetic domain structure have received extensive attention. Previously, most of the studies focused on the stripe magnetic domain structure of polycrystalline thin films. However, less attention was paid on amorphous magnetic thin films. Since the amorphous magnetic films have no long-range ordered crystal structure, no magnetocrystalline anisotropy, no grain boundary defects resistance hindering the domain wall displacement, they usually show excellent soft magnetic properties and have been widely applied in high-frequency devices. CoFeB alloy is one of the most important amorphous magnetic materials and has been extensively applied in various spintronic devices. In this work, amorphous CoFeB magnetic thin films were prepared by using a method of oblique sputtering technique at room temperature. The influences of oblique sputtering on the stripe magnetic domain structure, the in-plane static magnetic anisotropy, the in-plane rotational magnetic anisotropy, and the perpendicular magnetic anisotropy of the amorphous CoFeB films were studied by scanning probe microscope, vibrating sample magnetometer, ferromagnetic resonance. It is found that the method of oblique sputtering could effectively reduce the critical thickness for the appearance of stripe magnetic domain in amorphous CoFeB films. For a non-oblique sputtered CoFeB film, the critical thickness for the appearance of the stripe magnetic domain is above 240 nm. In contrast, after been subjected to the oblique sputtering, the critical thickness becomes below 240 nm. The different magnetic characterizations indicate that for the growth of CoFeB films with stripe magnetic domain structure, the oblique sputtering could not only enhance the strength of in-plane static magnetic anisotropy, but also improve the in-plane rotational magnetic anisotropy and the perpendicular magnetic anisotropy. All of the magnetic anisotropies are increased with the angle of oblique sputtering. The observation results of XRD and TEM prove that the prepared CoFeB thin films tend to amorphous structure. The characterization of SEM observation indicates that although the amorphous CoFeB films do not possess long-range ordered crystalline structure, they still could form a kind of columnar structure. The slanted columnar structure of CoFeB films could significantly increase the perpendicular magnetic anisotropy, thus lead to the appearance of stripe magnetic domain structure.