Abstract:Existing fixed-time traffic signal optimization methods mainly use traffic volumes collected by infrastructure-based detectors (e.g., loop detectors). These infrastructure-based detectors generally have high maintenance costs and low coverage. With the deployment of probe vehicles, vehicle trajectory data provide more information about traffic states and can be utilized for signal timing. However, most related studies assume high penetration rates of probe vehicles or short sampling intervals. This paper develops a hierarchical multi-objective optimization framework to optimize fixed-time traffic signals based on sampled vehicle trajectories at isolated signalized intersections, which is applicable to low-resolution trajectory data. Cycle length and green splits are optimized under both under- and slightly over-saturated traffic conditions. The number of over-saturated phases and average vehicle delays are adopted as the primary and the secondary objectives, respectively. Note that the queues of over-saturated phases cannot be discharged. The queue length and traffic delay of over-saturated phases will go infinite as time goes. The consideration of the over-saturated phase number helps increase vehicle throughput and reduce queue length and traffic delay. The aggregation of sampled trajectory data during the same period across multiple cycles and Same-ratio Principles (SRPs) are proposed to compensate for the limitations of low penetration rates of probe vehicles. The evolution of sampled trajectories with varying signal timings are formulated explicitly. A sampled-trajectory-density method is proposed to identify over-saturated phases. Then a mixed integer non-linear programming (MINLP) model is formulated and transformed to a series of mixed integer linear programming (MILP) models by linearization and enumerating cycle lengths. Simulation studies validate the advantages of the proposed model over the one in Synchro Studio. Sensitivity analysis shows that: (1) the proposed model is applicable to Poisson vehicle arrivals; (2) the proposed model can handle sampling intervals as long as 15 s when sufficient sampled vehicle trajectories are collected; (3) the number of sampled trajectories has impacts on the performance of the proposed model instead of probe vehicle penetration rates, especially with under-saturated traffic; (4) cycle lengths of initial signal timing plans have no noticeable impacts on the required number of sampled trajectories when a short sampling interval is applied; and (5) the proposed model is insensitive to the quality of initial signal timing plans with underand slightly over-saturated traffic. The proposed model is also with field data to demonstrate its in the real world.

Vehicle Trajectory Reconstruction for Signalized Intersections Using Mobile Traffic Sensors

Vehicle trajectory reconstruction for signalized intersections using variational formulation of kinematic waves

Vertical and Horizontal Queue Models for Oversaturated Signal Intersections with Quasi-Real-Time Reconstruction of Deterministic and Shockwave Queueing Profiles Using Limited Mobile Sensing Data

Vehicle Trajectory Reconstruction at Signalized Intersections under Connected and Automated Vehicle Environment.

Vehicle Trajectory Reconstruction for Signalized Intersections with Low-Frequency Floating Car Data

Integrated macro-micro modelling for individual vehicle trajectory reconstruction using fixed and mobile sensor data

A time-varying shockwave speed model for reconstructing trajectories on freeways using Lagrangian and Eulerian observations

Trajectory-based vehicle energy/emissions estimation for signalized arterials using mobile sensing data

Vehicle Trajectory Reconstruction Incorporating Probe and Fixed Sensor Data

A Time-varying Shockwave Speed Model for Trajectory Reconstruction using Lagrangian and Eulerian Observations

A Particle Filter-Based Approach for Vehicle Trajectory Reconstruction Using Sparse Probe Data

A Bayesian Estimation Approach for Spatiotemporal Vehicle Trajectory Reconstruction Using Multi-Source Traffic Flow Data

Sampled Trajectory Data-Driven Method of Cycle-Based Volume Estimation for Signalized Intersections by Hybridizing Shockwave Theory and Probability Distribution

Real-Time Queue Length Estimation with Trajectory Reconstruction Using Surveillance Data

Multi-objective Optimization of Traffic Signals Based on Vehicle Trajectory Data at Isolated Intersections

Kinematic model of start wave at signalized intersection

Probabilistic Model for Vehicle Trajectories Reconstruction Using Sparse Mobile Sensor Data on Freeways.

Arterial Traffic Flow Estimation Based on Vehicle-to-Cloud Vehicle Trajectory Data Considering Multi-Intersection Interaction and Coordination

Trajectory-based Identification of Critical Instantaneous Decision Events at Mixed-Flow Signalized Intersections.

Estimation of Queue Lengths, Probe Vehicle Penetration Rates, and Traffic Volumes at Signalized Intersections using Probe Vehicle Trajectories

Vehicle Index Estimation for Signalized Intersections Using Sample Travel Times