Abstract:Dielectric elastomers (DEs) featured with fast reversible and large deformation excited by an external electric field show promising applications as leading artificial muscle materials in many emerging technologies. It remains a great challenge to synthesize a DE simultaneously with high electromechanical performance (large actuation strain, high energy density, free of pre-stretch and bracing) and excellent mechanical properties (low Tg, low viscous loss, low modulus, and high mechanical strength). Herein, we propose and demonstrate that end-block-curing ABA triblock copolymer elastomer with well-designed structures is a new strategy to address the challenge by taking advantage of the microphase separation nature of the block copolymer. Particularly, poly (styrene-b-butyl acrylate-b-styrene) (SBAS) with post-curable end blocks, i.e. polystyrene (PS) blocks, are designed and synthesized. Different levels of cyclohex-3-enylmethyl acrylate (CEA) that contains two asymmetric vinyl groups with very different reactivity are incorporated into the end blocks for end-block curing while the molecular weight for each block is fixed. It is found that curing the end blocks enhances the strain-hardening effect during stretch and thus significantly increases the electro-mechanical performance. Without pre-stretch, the DE actuator of the end block cured SBAS exhibits a maximum actuation strain up to 72%, dielectric breakdown strength up to 154 kV mm(-1), and energy density up to 270 kJ/m(3), which are three, four, and almost fourty times that of the SBAS free of CEA, respectively. The maximum energy density is over 30 times that of mammalina skeletal muscle while the maximum actuation strain is 3.4 times. Interestingly, the improvement in eletromechanical performance is fulfilled with little increase in glass transition temperature (Tg), mild increase in modulus, and excellent tensile strength due to the microphase structures. The end-block-cured SBAS retains a low Tg of the rubbery phase around -35 degrees C, relatively low viscous loss of 0.2 at room temperature, a modulus lower than 1 MPa, and tensile strength around 3 MPa, which are attractive in terms of DE device applications.

A new bistable electroactive polymer for prolonged cycle lifetime of refreshable Braille displays

Highly Anisotropic and Stretchable Birefringent Elastomers for Multicolored Strain Displays

A Soft Shape Memory Reversible Dry Adhesive

3D Printing of Reprogrammable Liquid Crystal Elastomers with Exchangeable Boronic Ester Bonds

Smart Refreshable Braille Display Device Based on Magneto‐Resistive Composite with Triple Shape Memory

Large Displacement in Relaxor Ferroelectric Terpolymer Blend Derived Actuators Using Al Electrode for Braille Displays

Deformable Joule heating electrode based on hybrid layers of silver nanowires and carbon nanotubes and its application in a refreshable multi-cell Braille display

Refreshable Braille Display System Based on Triboelectric Nanogenerator and Dielectric Elastomer

End-block-curing ABA triblock copolymer towards dielectric elastomers with both high electro-mechanical performance and excellent mechanical properties

Height-renderable morphable tactile display enabled by programmable modulation of local stiffness in photothermally active polymer

Elastic Semiconductor Blends with High Strain Cycling Durability Using an Oligothiophene-Based Multiblock Polyurethane Matrix

Leveraging the Snap Buckling of Bistable Magnetic Shells to Design a Refreshable Braille Dot

A molecular design approach towards elastic and multifunctional polymer electronics

P(AMPS‐co‐PEGMA) Doped and PVDF‐HFP Enhanced Stretchable Polymer Electrolytes: Application as Flexible Electrochromic Devices

Scalable Photonic Liquid Crystal Nanoscale-Thick Films for Deformation and Discoloration

Nonelectric Sustaining Bistable Polymer Framework Liquid Crystal Films with a Novel Semirigid Polymer Matrix.

Highly Stretchable and Self-Adhesive Elastomers Based on Polymer Chain Rearrangement for High-Performance Strain Sensors

A Self‐Conformable Smart Skin with Sensing and Variable Stiffness Functions

Imparting Stretchable Semiconducting Polymers with Ambipolar Charge-Transport Capability by Using a Lewis Base of Triazabicyclodecene

Phonic Braille recognition system based on self-powered sensor with self-healing ability, temperature resistance, and stretchability

Highly Stretchable, Soft, Low-Hysteresis, and Self-Healable Ionic Conductive Elastomers Enabled by Long, Functional Cross-Linkers