Abstract:Measurement error occurs if the requirements of undistorted measurements cannot be satisfied by dynamic component characteristics of the sensor. Amplified time constant and longer thermal response time of armored thermocouple is caused by its additional protective cover structure and the inherent thermal inertia of the internal temperature measuring element. Therefore, there is hysteresis dynamic characteristic in actual measurement of sensor. This paper proposes an accurate compensation of armored thermocouple based on fireworks algorithm that balances the contradiction between the accuracy of the existing solution and the complexity of the solution, corrects the measured thermocouple temperature signal. Weight factor is innovatively introduced to design the fitness function of fireworks algorithm, and the iterative process is sectionally executed that achieves the improvement of time constant and thermal response time of armored thermocouple. Finally, results are given in the simulation section. Dynamic compensation time is reduced from 537ms to 130ms, which is 75.79% lower than before compensation result. Moreover, the thermal response time is reduced from 345ms to 110ms, which is 68.16% lower than the before compensation result. From the experimental results, we can observe that the proposed method in this paper can broaden the working bandwidth of the thermocouple sensor through establishing dynamic mathematical model of thermocouple. After compensation, the dynamic characteristics of armored thermocouple are close to bare bead thermocouple without protective sleeve. The proposed method can replace easily damaged bare bead thermocouple to realize accurate measurement in harsh temperature measurement environments without need frequent replacement, which also improves economic benefits.

Dynamic Compensation For Infrared Thermometer Based On Wiener Model And Particle Swarm Optimization Algorithm

A Novel Method of Nonlinear Dynamic Compensation for Infrared Thermometer Based on Wiener Neural Network

Error Compensation and Parameter Identification of Circular Grating Angle Sensors

An Efficient Temperature Calibration Method Based on the Improved Infrared Forward Model and Bayesian Inference

Infrared thermometer sensor dynamic error compensation using Hammerstein neural network

The Study on Thermal State Error Compensation for a High-precision Displacement Measurement System

Analysis of Multi-Factor on Measurement Improvement of an Infrared Imager in Low-Temperature Environments

Modelling and infrared radiation compensation for non-contact temperature measurement

Cold Starting Temperature Time-Related Compensation Model of Inertial Sensors Based on Particle Swarm Optimization Algorithm.

Accurate Compensation of Armored Thermocouple Based on Fireworks Algorithm

Research On Thermal Error Compensation Instrument Based On Thermal Modal Analysis For Nc Machine Tools

Position-independent Thermal Error Compensation and Evaluation Based on Linear Correlation Filtering Technology

The research on compensation algorithm of infrared temperature measurement based on intelligent sensors

A hybrid method for overcoming thermal shock of non-contact infrared thermometers

A Soft Calibration Technique for Infrared Imaging Based on Physical Model of Thermal Radiation and Variational Bayesian Inference from Small Dataset

Intelligentization of machine tools: comprehensive thermal error compensation of machine-workpiece system

Thermal Error Modeling and Compensation of Spindles Based on LS-SVM

Thermal Deformation Errors Compensation System of Machine Tools

Applied Numerical Temperature Compensation Method for Infrared Thermometers

A Novel Compensation Method for Infrared Temperature Measurement Using Infrared Vision and Visible Light Vision Under Water Mist Interference

A novel dynamic compensation method for a contact probe based on Bayesian inversion