Abstract:The development of linear muscle‐like actuators remains a key objective in the field of electroactive polymers (EAPs). While ionic EAPs are promising technologies to develop biomimetic artificial muscles, their reliance on liquid electrolytes for operation typically restricts them to use in bending devices. Seldom have ionic linear actuators been demonstrated in air, and never in vacuum. Here both are demonstrated. A rational approach supported by a theoretical model is described to identify the general conditions allowing the design of ionic actuators with intrinsically linear deformations. The model highlights that linear deformation can occur by combining two electroactive electrodes with different mechanical and/or electromechanical properties. Where previous work on laminated actuators resulted in bending only, here it is shown that by combining one soft and one stiff electrode, or one highly expanding electrode, and the other minimally deforming electrode, 0.55% linear strain is achieved when activated with 2 V. Best combination of electrodes is selected based on electromechanical model predictions. Single actuator fibers are fabricated for experimental validation. Graded force up to 0.18 N has been achieved by bundling together five linear actuators. The resulting artificial muscles operate in open‐air, and also under high vacuum conditions, opening possibilities for space applications. A linear polymer actuator operating in air and in vacuum mimics muscle in its ability to scale forces using recruitment of parallel fibers. In this new approach, a rational design of linear artificial muscles supported by electromechanical model is described for ionic electroactive polymers. Artificial muscle bundles are developed and operated in open‐air but also under high vacuum conditions.

Actuation Properties Investigation: A Muscle Like Linear Actuator Based on Biopolymer Material: Ionic Polymer Metal Composites

Fabrication and Applied Investigation of a Muscle‐like Linear Actuator Using Lonic Polymer Metal Composites

Investigation on Electromechanical Properties of a Muscle-Like Linear Actuator Fabricated by Bi-Film Ionic Polymer Metal Composites

Combination Mechanism Investigation on the Muscle-Like Linear Actuator Using Ionic Polymer Metal Composites

Review of Soft Linear Actuator and the Design of a Dielectric Elastomer Linear Actuator

A Control-Oriented and Physics-Based Model for Ionic Polymer--Metal Composite Actuators

Fabrication of Bionic Linear Actuator and Application Study Based on 3D Printing

Biomimetic Applications Of Ionic Polymer Metal Composites (Ipmc) Actuators- A Critical Review

Low-Voltage Driven Ionic Polymer-Metal Composite Actuators: Structures, Materials, and Applications

Design and Preparation of Biomorphic IPMC and Its Performance Research

High Specific Surface Area Pd/Pt Electrode-Based Ionic Polymer–Metal Composite for High-Performance Biomimetic Actuation

Performance of linear actuator unit based on ionic polymer metal composites

Electromechanical Performances of IPMC Actuator Enhanced by High-Quality Pd/Pt Electrodes*

Highly Flexible, Large-Deformation Ionic Polymer Metal Composites for Artificial Muscles: Fabrication, Properties, Applications, and Prospects

Artificial muscles based on conducting polymers

Investigation of a Biocompatible Artificial Muscle Based on Different Electrolyte Additive

Linear Artificial Muscle Based on Ionic Electroactive Polymer: A Rational Design for Open‐Air and Vacuum Actuation

A mechanical model of a non-uniform ionomeric polymer metal composite actuator

Active Tube-Shaped Actuator with Embedded Square Rod-Shaped Ionic Polymer-Metal Composites for Robotic-Assisted Manipulation.

Bioinspired actuators with intrinsic muscle-like mechanical properties

Investigation into Morphology Characterization of Various Surface Electrode of Biopolymer Actuator: Ionic Polymer Metal Composites