Abstract:Optical coherence tomography (OCT) is a medical optical imaging technique that can achieve high-resolution 3D images (1 15 m)1 by detecting infrared light scattered by body tissue. It has an imaging depth range of about 3mm in highly-scattered tissue and has already been widely used for external imaging, e.g., for eye diseases and skin cancer diagnosis. It would be useful to apply OCT to internal imaging, since about 85% of all cancers originate from the surface layers of internal organs. As these layers are within its imaging depth range, OCT can detect cancer at an early stage as well as precisely determine tumor margins. However, it is very challenging to apply this technique to internal organs because of stringent size and imaging time constraints. One promising approach is to use microelectromechanical systems (MEMS) scanning micromirrors. Several research groups have demonstrated actuation mechanisms to generate rotational scanning for micromirrors for endoscopic OCT. Among them, electrostatic micromirrors can be very fast and consume low power, but the angular scan range is limited and the required driving voltage is too high ( 100V) to be safe for patients. Electromagnetic micromirrors have also been used for OCT probes, but the assembly process is complicated and the potential electromagnetic interference caused by the use of permanent magnets is another concern. Another problem these mirrors share is that they all have a small fill factor (the ratio of the mirror area to the device area). For a given resolution, the required mirror area is fixed. Thus, a small fill factor leads to a large device, which in turn increases the imaging probe size. Electrothermal mirrors, on the other hand, can achieve a large scan range at low drive voltage, but most of them have large initial tilt angles and significant shift of rotation centers, causing serious optical alignment and coupling problems. Figure 1. Scanning electron micrograph of an electrothermal MEMS mirror. Chip size: 2mm 2mm.

In vivo 3D and Doppler OCT imaging using electrothermal MEMS scanning mirrors

3D Endoscopic Optical Coherence Tomography Based on Rapid-Scanning MEMS Mirrors

Endoscopic Optical Coherence Tomography Angiography Using Inverse SNR-amplitude Decorrelation Features and Electrothermal Micro-Electro-mechanical System Raster Scan

Optical Micro-Endoscopes for 3D In-Vivo Imaging

Three-Dimensional Endoscopic Optical Coherence Tomography By Use Of A Two-Axis Microelectromechanical Scanning Mirror

3D in Vivo Optical Coherence Tomography Based on a Low-Voltage, Large-Scan-range 2D MEMS Mirror.

MEMS Scanning Micromirror for Optical Coherence Tomography.

Mems Based Endoscopic Optical Coherence Tomography

Three-Dimensional Time and Fourier Domain Endoscopic Oct Using 2 Axis Scanning Mems Mirror

Microfabricated Endoscopic Probe Integrated MEMS Micromirror for Optical Coherence Tomography Bioimaging

MEMS micromirror integrated endoscopic probe for optical coherence tomography bioimaging

Endoscopic Swept-Source Optical Coherence Tomography Based on a Two-Axis Microelectromechanical System Mirror.

In Vivo Three-Dimensional Microelectromechanical Endoscopic Swept Source Optical Coherence Tomography.

Endoscopic Optical Doppler Tomography Based on Two-Axis Scanning MEMS Mirror

A Silicon Optical Bench-Based Forward-View Two-Axis Scanner for Microendoscopy Applications

An endoscopic forward-viewing OCT imaging probe based on a two-axis scanning mems mirror

Optical Coherence Tomography Endoscopic Probe Based on a Tilted MEMS Mirror.

Circumferential-scanning Endoscopic Optical Coherence Tomography Probe Based on a Circular Array of Six 2-Axis MEMS Mirrors.

Miniature endoscopic optical coherence tomography probe employing a two-axis microelectromechanical scanning mirror with through-silicon vias.

Design of Optical Coherence Tomography Probe Using a 2-Axis MEMS Scanning Mirror

Endoscopic Optical Coherence Tomography with A Modified Microelectromechanical Systems Mirror for Detection of Bladder Cancers