Abstract:In this paper, the depth and length of lateral subsurface cracks were gauged using laser-generated Rayleigh waves in the frequency domain. First, the frequency domain characteristics of reflected and transmitted Rayleigh waves after a laser-generated Rayleigh wave interacts with lateral subsurface cracks are investigated based on the finite element method (FEM). The simulation results reveal that there is a certain relationship between the center frequency of reflected and transmitted Rayleigh waves and crack size. The center frequency of the reflected Rayleigh wave decreases with increasing crack length but is independent of depth. When the crack length remains unchanged, the center frequency of the transmitted Rayleigh wave increases with increasing crack depth. Then, the quantitative relationships between the ratio of the crack length to the incident Rayleigh wavelength and the ratio of the reflected Rayleigh wave frequency to the incident Rayleigh wave frequency, the ratio of the crack depth to the incident Rayleigh wavelength and the ratio of the transmitted Rayleigh wave frequency to the incident Rayleigh wave frequency were obtained via multiple function fitting, and a method for the quantitative detection of the lateral subsurface crack depth and length was proposed. Finally, experimental and simulated data were used to validate the proposed relationships, and the results showed that the relative error of the measured crack length did not exceed 7.19% and that the relative error of the measured crack depth did not exceed 14.82%. The results show that the method has good application prospects for the quantitative measurement of lateral subsurface crack depth and length.

Application and Improvement of Surface Wave Transmission Technique for Measuring the Crack Depth in Reinforced Concrete Members

Application Research on Surface Wave Technique in Crack Depth Detection of Hydraulic Concrete

SPECTRAL ENERGY TRANSMISSION METHOD FOR CARCK DEPTH ESTIMATION IN CONCRETE

Experimental Investigation on First Crack Strength and Crack Widthof Reinforced Concrete Beamsby Side-Bonding Cfrp Sheets

Spectral Energy Transmission Method for Crack Depth Estimation under Various Mix Proportions of Concrete

Reduced Surface Wave Transmission Function and Neural Networks for Crack Evaluation of Concrete Structures

Numerical Study of Length and Angle Gauging for Subsurface-Inclined Cracks Based on Reflected Surface Waves with Laser Ultrasonic Technique

Modified Surface Wave Velocity Measurement Technique in Concrete

Improved Rayleigh Wave Velocity Measurement for Nondestructive Early-Age Concrete Monitoring

Comparison Study of Ultrasonic and Surface Wave Methods for Crack Depth Detection in Concrete Panels

Crack depth measurement and key points of accurate identification in concrete structures: a review

Laser-generated Surface Waves for Quantitative Detection of Inclined Surface Cracks Based on Finite Element Analysis

Quantitative Detection of Lateral Subsurface Cracks Based on Laser-Generated Rayleigh Waves in the Frequency Domain

INFLUENCE OF CRACKING WIDTH TO CONCRETE DURABILITY

Localization and Size Quantification of Surface Crack of Concrete Based on Rayleigh Wave Attenuation Model

Experimental Study on the Correlation between Crack Width and Crack Depth of RC Beams

Cracking Mechanism of Corroded Reinforced Concrete Column Based on Acoustic Emission Technique

Quantitative Evaluation of Closed Cracks on the Surface of Stainless Steel by Microwaves

A Frame Work for Concrete Crack Monitoring Using Surface Wave Transmission Method

Corrosion damage detection in reinforced concrete using Rayleigh wave-based method

Application of Surface Wave Method for Nondestructive Testing of Hydraulic Tunnel Concrete