Abstract:Application of transition flow can be found in several processes and systems. It has been revealed through findings from various researchers that the values of Reynolds numbers at which transition flow occurs vary. In the current work, investigations were numerically conducted by Fluent on transition of water flow in three assorted plain tubes fitted with miscellaneous tape insertions. They are plain tube with crossed-axes-circle-cut tape insert (C-C tube), plain tube with crossed-axes-triangle-cut tape insert (C-T tube), and plain tube with crossed-axes-ellipse-cut tape insert (C-E tube). The focus of the work is to explore the influence of the tape insertion on commencement and finish of transition flow in the tubes with respect to the Reynolds number of the flow. The Reynolds number (Re) taken into account for the transition flow is 2,150≤Re≤4,650, and the variation of Shear-Stress Transport κ-ω model that deals with transition flow was utilized. The results showed that transition flow starts at Re=2,300 and finishes at Re=4,400 in C-T tube, starts at Re=2,780 and finishes at Re=4,610 in C-C tube, but starts at Re=2,550 and finishes at Re=4,500 in C-E tube. The Nusselt number in C-T tube is 19.3% to 45.6% higher than that in C-C tube, but the Nusselt number in C-T tube is 3.6% to 28.3% more than that in C-E tube. The friction factor in C-T tube is 2.15% to 4.56% higher than that in C-C tube; the friction factor in C-T tube is 0.83% to 3.33% more than that in C-E tube. These results indicate that for the case of the tubes considered in this work, the C-T tube, which is the first one in which transition flow commences and ends, has the highest Nusselt number, but C-C tube, in which transition flow commences and finishes last, has the least Nusselt number. Interestingly, the same phenomenon applies to the friction factor. Doi: 10.28991/HIJ-2022-03-02-02 Full Text: PDF

Flow Patterns and Mode Transitions for Falling-Film on Flat Tubes

Flow Modes and Mode Transitions for Falling Films on Flat Tubes

Flow Characteristics of Film Flow over 3D Corrugations Column Plate

Effects of Liquid Supply Method on Falling-Film Mode Transitions on Horizontal Tubes

Experimental and Numerical Investigation on Gravity-Driven Film Flow over Triangular Corrugations

Flow Regime Transition and Liquid Distribution in a 3D Concurrent Downflow Three-Phase Moving Bed

Intercolumn two-phase flow patterns across falling film tube bundles

Experimental Research on Flow Mode Transition of Falling Film Flow on Metal Foam Wrapped Tubes

Effects of a Countercurrent Gas Flow on Falling-Film Mode Transitions Between Horizontal Tubes

Heat Transfer Performance for A Falling-Film on Horizontal Flat Tubes

Effects of Liquid Distribution Method on Falling-Film Mode Transitions Between Horizontal Tubes

Flow pattern identification for internally threaded tubes based on pressure drop fluctuations

Flow Pattern Change in a Vertical Tube for the Liquid Film Suction

CFD Study of Behavior of Transition Flow in Distinct Tubes of Miscellaneous Tape Insertions

Falling Film Evaporation Of Water On Horizontal Configured Tube Bundles

Two-Phase Flow Pattern Map for Evaporation in Horizontal Tubes: Latest Version

Experimental Study and Numerical Simulation on Falling Film Thickness Outside a Horizontal Tube

Falling film flow and heat transfer on a horizontal tube under the shearing of vertical vapor

Numerical Study of Falling Film Flow on a Horizontal Rotating Tube

Flow Pattern Transition and Void Fraction Prediction of Gas–liquid Flow in Helically Coiled Tubes

Experimental study on the transition modes of falling film between horizontal 3D finned tubes and their transitional Reynolds number prediction model