Electrical derivative measurement of quantum cascade lasers (QCLs)

Dingkai Guo,Xing Chen,Liwei Cheng,Graninger, A.

DOI: https://doi.org/10.1109/LEOS.2008.4688866

2008-01-01

Abstract:Testing QCL devices usually requires cryogenic systems, mid-IR windows, optics and detectors. We report here the demonstration of an electrical derivative method that can quickly measure QCL lasing thresholds without using mid-IR optics or detectors.

What problem does this paper attempt to address?

Electrical Derivative Measurement of Quantum Cascade Lasers

Dingkai Guo,Liwei Cheng,Xing Chen,Fow-Sen Choa,Jenyu Fan,Terry Worchesky

DOI: https://doi.org/10.1063/1.3549731

IF: 2.877

2011-01-01

Journal of Applied Physics

Abstract:The electrical derivative characteristics of quantum cascade lasers (QCLs) are investigated to test the QCL threshold, leakage current, and possibly explore carrier transport. QCL thresholds can be identified by searching for the slope peak of the first derivative of the I-V curves and can be further confirmed with its alignment to the peak of the second derivative of the I-V curves. Leakage current in QCLs with oxide-blocked ridge waveguides and buried heterostructure (BH) waveguides are studied and compared. The oxide-blocking structures provide the lowest leakage current although the capped-mesa-BH (CMBH) QCLs provide the toughest durability under highly stressful operations. The leakage current of CMBH QCLs are also compared at different temperatures.
Directly Modulated Quantum Cascade Laser and Its Application in Free-Space Communications

Xiaodan Pang,Richard Schatz,Mahdieh Joharifar,Aleksejs Udalcovs,Vjaceslavs Bobrovs,Lu Zhang,Xianbin Yu,Yan-Ting Sun,Sergei Popov,Sebastian Lourdudoss,Oskars Ozolins

DOI: https://doi.org/10.1117/12.2602236

2021-01-01

Abstract:In this report, we summarize our recent achievements in free-space communications in the mid-infrared (MIR) region enabled by directly modulated quantum cascaded laser (QCL) at 4.65 mu m (similar to 65 THz). We have experimentally demonstrated a multigigabit free- space transmission link in the lab environment with the QCL operating at room temperature. The QCL chip is mounted on a commercial QCL mount with a water-cooled Peltier element. Multilevel modulation formats at different baud rates are generated and combined with the laser driving current at a custom-made bias-tee to drive and modulate the QCL. A commercial mercury cadmium telluride (MCT, HgCdTe) photovoltaic (PV) MIR detector with a built-in trans-impedance amplifier was used to receive the MIR free-space signal. With the receiver to be the bottleneck of the system bandwidth, the end-to-end 3-dB bandwidth was measured to be around 320 MHz, and the 6-dB bandwidth was around 450 MHz. We have successfully demonstrated up to 6 Gbps free space transmission with multilevel modulation formats, assisted with effective digital equalization techniques despite the limited bandwidth.
Ultra-Low Threshold Lasing In A Quantum Dot Microdisk Cavity

G. S. Solomon,S. Goetzinger,W. Fang,Z. G. Xie,H. Cao

DOI: https://doi.org/10.1109/cleo.2007.4452488

2007-01-01

Abstract:We describe microdisk lasers exhibiting submicrowatt CW lasing thresholds from a small number of QD emitters. Changes in the cavity linewidth, second-order correlation measurements, and output emission versus input pumping are used to verify lasing. (C)2007 Optical Society of America
Low Threshold Short Cavity Quantum Cascade Lasers

Xing Chen,Liwei Cheng,Dingkai Guo,Fow-Sen Choa,Terry Worchesky

DOI: https://doi.org/10.1117/12.875960

2011-01-01

Abstract:Low threshold quantum cascade lasers (QCLs) are important for low-power chemical sensor applications. We report a low-threshold high-period-number 4.8 mu m strain-balanced InGaAs/InAlAs quantum cascade laser. By growing more periods (up to 60 periods) of QCL stages, shortening the QCL cavity length, and applying high-reflectivity coatings on both facets of the laser cavity, low threshold QCLs can be obtained. At current stage a QCL threshold of <30mA at 20K, <50mA at 80K, and <120mA near room temperature were achieved. Low current threshold QCLs will have significant impacts to future chemical sensing systems.
Electrical Derivative Analysis Of Leakage Current In Quantum Cascade Lasers

Dingkai Guo,Fow-Sen Choa,Liwei Cheng,Xing Chen,Mohit Godbole

DOI: https://doi.org/10.1109/ICIPRM.2009.5012512

2009-01-01

Abstract:Leakage current in quantum-cascade-lasers with oxide-blocked-ridge waveguide and buried-heterostructure (with/without n-InP top-cover) are compared using electrical derivative measurements. Oxide-blocking structure provides the least leakage current although the top-covered BH QCLs show the toughest durability.
Quantum Cascade Laser As A Mid-Infrared Photovoltaic and Photoconductive Detector

Xing Chen,David Shyu,Fow-Sen Choa,Sudhir Trivedi

DOI: https://doi.org/10.1117/12.884424

2011-01-01

Abstract:We report the operation of quantum cascade lasers (QCLs) as a mid-infrared (mid-IR) photo-detector under both photovoltaic and photoconductive modes. When operated at photoconductive mode, negative photo-conductance is observed at low bias current. The photo-conductance of the device changes from negative to positive when the bias is increased over a transparency point. These interesting mid-IR detection characteristics of QCL gain material can help and simplify the design and testing of mid-IR photonic integrated devices and circuits by using them to measure the coupling and waveguide loss and provide gain at any location in a mid-IR photonic circuit.
Mid-IR Optical Amplification and Detection Using Quantum Cascade Lasers.

Dingkai Guo,Xing Chen,Liwei Cheng,Alexey Belyanin,Fow-Sen Choa

DOI: https://doi.org/10.1364/oe.21.030545

IF: 3.8

2013-01-01

Optics Express

Abstract:Amplification and detection characteristics of mid-infrared quantum cascade lasers (QCLs) are studied. The QCL amplifier has an adjustable bandwidth and tunable gain peak to function as a tunable mid-IR filter. By biasing the QCL slightly below its threshold, we demonstrated more than 11dB optical gain and over 28dB electrical gain at specified wavelengths. In the electrical gain measurement process, the resonant amplifier also functioned as a detector. Mid-IR amplification and detection can be achieved using the same material for the laser source. This indicates that intersubband based gain materials can be ideal candidates for mid-IR photonic integrations.
Low-threshold Current Short-Cavity Quantum Cascade Lasers

Xing Chen,Liwei Cheng,Dingkai Guo,Fow-Sen Choa,Terry Worchesky,Jiun-Yun Li

DOI: https://doi.org/10.1117/12.873030

2010-01-01

Abstract:We report in this paper the study of achieving low current threshold quantum cascade lasers (QCLs) by using highreflection (HR) coating to short-cavity QCLs. Experimental results show that the QCL current threshold (Ith) and injecting electrical power are significantly decreased with HR coatings applied to one side or both sides of a QCL. The QCL structures used in the experiment are strain balanced InGaAs/InAlAs supperlattices based on InP substrate with the emission wavelength at λ~4.8μm. QCL devices with 28 periods and 60 periods are studied. With HR coatings on both laser facets, a 28 periods QCL device cleaved with 1mm long cavity expresses a low current threshold of 70mA at cryogenic temperature and a 0.5mm long cavity device shows a current threshold of 65mA at 50K. A 0.5mm long 60 periods QCL device with both sides HR coated is found to have a current threshold as low as 30mA at 20K and still below 50mA at liquid Nitrogen cooled temperature.
Mid-infrared QCL as a tunable resonant amplifying photodetector

dingkai guo,xing chen,liwei cheng,alexey belyanin,fowsen choa

2011-01-01

Abstract:We report a tunable mid-infrared photo-detector based on quantum cascade laser (QCL). The device is biased below and near threshold and it performs as a resonant optical amplifier and at the same time a photo-detector.
Analysis on the Thermal Characteristics of Quantum Cascade Laser

Jianwei Shi,Changling Yan,Yufei Li,Dongda Zhu,Peng Li

DOI: https://doi.org/10.1109/icoom.2015.7398768

2015-01-01

Abstract:Quantum cascade laser(QCL) is a new type of semiconductor laser. It has many advantages such as small volume, low threshold, wide working band. Quantum cascade laser can be used in many fields such as atmospheric pollution monitoring, infrared communication, medical diagnosis without injury. Quantum cascade laser produces a large amount of heat, it will greatly influence the performance of the device. We used the finite element analysis software ANSYS to simulate the distribution of temperature field in different packaging materials. The results showed that the InGaAs/InAlAs QCL using In solder packaged device had the best thermal characteristics. Then the InGaAs/InAlAs QCL was fabricated with In solder. And its optical properties were tested. The output power of QCL was 18mW.
Photoreflectance and Fourier transform infrared spectroscopy study of intersubband transitions of a ZnxCd1−xSe/Znx′Cdy′Mg1−x′−y′Se asymmetric coupled quantum well structure for quantum cascade laser application

J. D. Wu,C. T. Huang,Y. S. Huang,W. O. Charles,A. Shen,M. C. Tamargo

DOI: https://doi.org/10.1063/1.3263951

IF: 4

2009-11-09

Applied Physics Letters

Abstract:Photoreflectance (PR) and Fourier transform infrared (FTIR) spectroscopy were used to study the intersubband (ISB) transitions of a ZnxCd1−xSe/Znx′Cdy′Mg1−x′−y′Se asymmetric coupled quantum well (ACQW) structure for quantum cascade laser (QCL) application. The PR spectrum revealed a wide range of possible optical transitions in the ACQW structure. A comprehensive analysis of the PR spectrum led to the identification of various interband transitions. The ISB transitions were estimated and confirmed by FTIR absorption measurements. The results demonstrated the use of PR as a complimentary technique to FTIR for the contactless and nondestructive characterization of ACQW structures for QCL application.

physics, applied
28-Db Gain Mid-Infrared Optical Amplification Using Resonant Quantum Cascade Laser Optical Amplifier

Xing Chen,Dingkai Guo,David Shyu,Liwei Cheng,Fow-Sen Choa,Sudhir Trivedi

DOI: https://doi.org/10.1117/12.905521

2012-01-01

Abstract:We report the operation of quantum cascade lasers (QCLs) as a mid-infrared photodetector as well as a tunable resonant amplifying detector. When biased at low voltage or without bias, QCL works as a photoconductive or photovoltaic detector. When biased near threshold, QCL operates as a tunable resonant amplifying detector. The detected signal reaches its maximum when the QCL bias is close to its threshold. The maximum signal power is over 28 dB higher compared with the case without bias. These interesting mid-IR detection and amplification characteristics of QCL gain material can help with mid-IR optical filtering and photonics integration.
Two-Dimensional Simulation of Mid-Infrared Quantum Cascade Lasers: Temperature and Field Dependent Analysis

Ying-Ying Li,Z. -M. Simon Li,Guo-Ping Ru

DOI: https://doi.org/10.1109/nusod.2012.6316489

2012-01-01

Abstract:We report on a 2D simulation study of a couple of mid-infrared quantum cascade lasers based on the integration of a number of optoelectronic models. Quantum mechanical computation was performed to find the quantization states and a rate equation approach was used to compute the optical gain. Temperature and field dependence effects are taken into account in optical gain model to make a realistic simulation of QCLs. The simulation study compared the integrated models with experimental data with different structures and at different temperatures. Reasonable agreements between experiment and simulation have been obtained.
Thermal Investigation of Mid-Infrared Quantum Cascade Lasers under Quasi-Continuous-Wave Operations

Xing Chen,Liwei Cheng,Dingkai Guo,Fow-Sen Choa,Terry Worchesky

DOI: https://doi.org/10.1117/12.875968

2011-01-01

Abstract:The temperature effect on the characteristics of strain-balanced mid-infrared quantum cascade lasers is theoretically investigated and compared to experimental results. Our theoretical model simulates the temperature dependence of modal gain, current threshold density, and optical output power of a QCL at pulsed, continuous wave ( CW), and quasi-CW operation conditions. Simulation results show that QCLs operated at quasi-CW driving condition expresses much lower laser core temperature than CW mode while generates comparable or even higher average power than CW mode. The model can be used to predict the optimum driving condition in order to generate maximum average output power.
Femtosecond Measurements of Near-Infrared Pulse Induced Mid-Infrared Transmission Modulation of Quantum Cascade Lasers

Hong Cai,Sheng Liu,Elaine Lalanne,Dingkai Guo,Xing Chen,Xiaojun Wang,Fow-Sen Choa,Anthony M. Johnson

DOI: https://doi.org/10.1063/1.4880358

IF: 4

2014-01-01

Applied Physics Letters

Abstract:We temporally resolved the ultrafast mid-infrared transmission modulation of quantum cascade lasers (QCLs) using a near-infrared pump/mid-infrared probe technique at room temperature. Two different femtosecond wavelength pumps were used with photon energy above and below the quantum well (QW) bandgap. The shorter wavelength pump modulates the mid-infrared probe transmission through interband transition assisted mechanisms, resulting in a high transmission modulation depth and several nanoseconds recovery lifetime. In contrast, pumping with a photon energy below the QW bandgap induces a smaller transmission modulation depth but much faster (several picoseconds) recovery lifetime, attributed to intersubband transition assisted mechanisms. The latter ultrafast modulation (>60 GHz) could provide a potential way to realize fast QCL based free space optical communication.
A Circuit Model of Quantum Cascade Laser Based on a Numerical Analysis

Jie Yang,Wei Zhou,Xiang Li,Jie Wu,Sujing Xia

DOI: https://doi.org/10.4028/www.scientific.net/amr.490-495.61

2012-01-01

Advanced Materials Research

Abstract:Based on the dynamic analysis and numerical computation of quantum cascade laser(QCL), a simple equivalent circuit model of QCL was established, in which we considered the spontaneous emission effect for QCL's start delay. The direct current(DC), transient and frequency response characteristics of QCL were obtained by means of the circuit simulation of PSPICE program, and some relevant parameters that may affect the QCL performance have been analyzed. The results of simulation are consistent with that of numerical calculation in previous literatures.
Self-Consistent Approach for Quantum Cascade Laser Characteristic Simulation

Gang Chen,Tao Yang,Chen Peng,Rainer Martini

DOI: https://doi.org/10.1109/jqe.2011.2153827

IF: 2.5

2011-01-01

IEEE Journal of Quantum Electronics

Abstract:We present a self-consistent approach to simulate the output characteristics of a quantum cascade laser (QCL), such as the current-light (I-L) and current-voltage (I-V) curves. Unlike the conventional 1(1/2) period model, our new QCL model includes the spontaneous emission and the stimulated emission, which allow the numerical study of the laser behavior above its threshold. The corresponding numerical method is proposed to solve the full laser rate equations in a self-consistent way. For a given QCL, the I-L and I-V curves are calculated, showing a good agreement with the typical QCL output characteristics. Besides the output properties, this new model also provides a way to study the photon and electron dynamics in the QCL cavity above the laser threshold. An example of the QCL photon and electron response to the interband ultrafast optical excitation is given at the end of this paper. All simulation results show the validity of the new model.
Widely Tunable Monolithic Mid-Infrared Quantum Cascade Lasers Using Super-Structure Grating Reflectors

Dingkai Guo,Jiun-Yun Li,Liwei Cheng,Xing Chen,Terry Worchesky,Fow-Sen Choa

DOI: https://doi.org/10.3390/photonics3020025

IF: 2.536

2016-01-01

Photonics

Abstract:A monolithic, three-section, and widely tunable mid-infrared (mid-IR) quantum cascade laser (QCL) is demonstrated. This electrically tuned laser consists of a gain section placed between two super structure grating (SSG) distributed Bragg reflectors (DBRs). By varying the injection currents to the two grating sections of this device, its emission wavelength can be tuned from 4.58 mu m to 4.77 mu m (90 cm(-1)) with a supermode spacing of 30 nm. This type of SSG-DBR QCLs can be a compact replacement for the external cavity QCL. It has great potential to achieve gap-free and even further tuning ranges for sensor applications.
Gain Measurement of Terahertz Quantum Cascade Laser Via a Master-Oscillator Power-Amplifier Configuration

Chenren Yu,Huan Zhu,Fangfang Wang,Gaolei Chang,Haiqing Zhu,Jianxin Chen,Gangyi Xu,Li He

DOI: https://doi.org/10.1016/j.jcrysgro.2019.03.001

IF: 1.8

2019-01-01

Journal of Crystal Growth

Abstract:We report a method to measure the net loss and gain of a terahertz quantum cascade laser (THz-QCL), which is based on a master-oscillator power-amplifier (MOPA) configuration. In the measurement, the master-oscillator (MO) section and power-amplifier (PA) section are separately biased. With the fixed seed power from the MO section, the output power of the device is measured at various bias voltage applied on the PA section, from which the net loss and gain is deduced as a function of bias. We demonstrate that gain clamping and gain saturation can be avoided in our measurement, which allow a complete evolution of the loss and gain characteristics. For a THz-QCL with the bound-to-continuum active region and the metal-metal waveguide, the measured maximal net gain is about 13.0-16.5 cm(-1) at 2.58 THz at 20 K, which is in qualitative agreement with the theoretical analysis.
Quasi-Continuous-Wave Operations of Quantum Cascade Lasers

Xing Chen,Liwei Cheng,Dingkai Guo,Fow-Sen Choa,Terry Worchesky,Jiun-Yun Li

DOI: https://doi.org/10.1117/12.873031

2010-01-01

Abstract:In this paper, quasi-continuous-wave (quasi-CW) operation of quantum cascade lasers (QCLs) is studied. A group of strain-balanced InGaAs/InAlAs QCLs emitting around lambda similar to 4.8 mu m were used in the experiment. QCLs were tested at different driving conditions (i.e. pulsed mode, CW mode and quasi-CW mode) at various temperatures. Experimental measurements show that thermal effect plays an important role in deteriorating QCL performance. This is especially true at high temperatures. At low temperature (similar to 100K), L-I curves with different pulse widths exhibit no significant difference. While at a higher temperature (similar to 200K), we observed that the longer the pulse width, the lower the roll-over power and the worse the laser performance. At 100K, the roll-over power increases as duty cycle increases until it reaches CW operation, indicating that the thermal generation difference for quasi-CW mode and CW mode is negligible. At 200K, however, a maximum roll-over power is about 50mW at duty cycle of 65% corresponding to a CW roll-over power of 40mW. It reveals that at high temperature, quasi-CW operation generates less heat and more average output power. Therefore, quasi-CW operation is obviously a favorable way to achieve high performance operations at high temperature.

Electrical derivative measurement of quantum cascade lasers (QCLs)

Electrical Derivative Measurement of Quantum Cascade Lasers

Directly Modulated Quantum Cascade Laser and Its Application in Free-Space Communications

Ultra-Low Threshold Lasing In A Quantum Dot Microdisk Cavity

Low Threshold Short Cavity Quantum Cascade Lasers

Electrical Derivative Analysis Of Leakage Current In Quantum Cascade Lasers

Quantum Cascade Laser As A Mid-Infrared Photovoltaic and Photoconductive Detector

Mid-IR Optical Amplification and Detection Using Quantum Cascade Lasers.

Low-threshold Current Short-Cavity Quantum Cascade Lasers

Mid-infrared QCL as a tunable resonant amplifying photodetector

Analysis on the Thermal Characteristics of Quantum Cascade Laser

Photoreflectance and Fourier transform infrared spectroscopy study of intersubband transitions of a ZnxCd1−xSe/Znx′Cdy′Mg1−x′−y′Se asymmetric coupled quantum well structure for quantum cascade laser application

28-Db Gain Mid-Infrared Optical Amplification Using Resonant Quantum Cascade Laser Optical Amplifier

Two-Dimensional Simulation of Mid-Infrared Quantum Cascade Lasers: Temperature and Field Dependent Analysis

Thermal Investigation of Mid-Infrared Quantum Cascade Lasers under Quasi-Continuous-Wave Operations

Femtosecond Measurements of Near-Infrared Pulse Induced Mid-Infrared Transmission Modulation of Quantum Cascade Lasers

A Circuit Model of Quantum Cascade Laser Based on a Numerical Analysis

Self-Consistent Approach for Quantum Cascade Laser Characteristic Simulation

Widely Tunable Monolithic Mid-Infrared Quantum Cascade Lasers Using Super-Structure Grating Reflectors

Gain Measurement of Terahertz Quantum Cascade Laser Via a Master-Oscillator Power-Amplifier Configuration

Quasi-Continuous-Wave Operations of Quantum Cascade Lasers