Efficient Photo-Degradation of Dyes Using Cuwo4 Nanoparticles with Electron Sacrificial Agents: A Combination of Experimental and Theoretical Exploration

Xinjian Xie,Mengyin Liu,Changhong Wang,Lei Chen,Jianping Xu,Yahui Cheng,Hong Dong,Feng Lu,Wei-Hua Wang,Hui Liu,Weichao Wang

DOI: https://doi.org/10.1039/c5ra18788e

IF: 4.036

2016-01-01

RSC Advances

Abstract:Photocatalytic process of CuWO4 in the presence of electron sacrificial agents.

What problem does this paper attempt to address?

Advances in Photocatalytic Degradation of Dyestuffs with TiO2

Gui-qiang WANG,Zhong-jun FU,Lu-shan YU

DOI: https://doi.org/10.3969/j.issn.1672-1179.2005.01.016

2005-01-01

Abstract:Dyestuffs from the textile and photographic industries are becoming a major source of environmental contaminations. The treatment of dye-containing wastewater by conventional methods has drawback due to difficulties in the complete removal of color and expensive. TiO2 is the most common photocatalyst because it is chemical stability, non-toxicity and low cost. The excitated wavelength of TiO2 can be widened by the treatment of doping or dye sensitizing. The new advances of dyestuffs photocatalytic degradation with TiO2 are reviewed with 39 references.
Localized Electric Field‐Induced Efficient Photocatalytic Oxidation over Cu‐Doped WO3 Nanofibers with Strong Dopant/Matrix Interaction

Lv Chen,Yuan Lin,Jianhua Zhang,Jinyan Xiong,Yunyun Gui,Lijun Liu

DOI: https://doi.org/10.1002/cctc.202201190

IF: 4.5

2022-11-19

ChemCatChem

Abstract:Photocatalytic oxidation technology can mineralize hazardous volatile organic compounds (VOCs), but the poor photocatalytic oxidation activity limits its practical application. Here we develop Cu‐doped WO3 electrospun nanofibers through a non‐equivalent doping strategy. The Cu dopant prefers substituting five‐coordinated W atoms atop the WO3 matrix, inducing strong dopant/matrix interaction (SDMI) effect and prominent charge rearrangement. A localized electric field (LEF) forms pointing from positively charged WO3 matrix to negatively charged Cu dopant, which triggers efficient photoexcited charge separation. Further, the Cu dopant promoted the production of ·OH radicals and thereby enhanced VOCs photodegradation. The 0.7% Cu‐doped WO3 nanofibers show optimal photocatalytic oxidation performance towards formaldehyde and acetone, 5.5 and 4.8 times higher than pristine WO3 nanofibers, respectively. This work highlights the role of dopant‐induced LEF on the charge carriers separation and might shed light on developing more efficient photocatalysts with non‐equivalent dopants.

chemistry, physical
Optimization of CuAl2O4 Nanoparticles for Enhanced Photocatalytic Degradation of Organic Dyes Under UV and Visible Light

Sattar H. Abed,Ali H. Reshak

DOI: https://doi.org/10.1007/s10895-024-04054-4

2024-11-28

Journal of Fluorescence

Abstract:Organic dyes, due to their persistence and toxicity, represent a significant environmental challenge. This study focuses on the photocatalytic degradation of organic dyes using CuAl 2 O 4 nanoparticles, synthesized through the co-precipitation method, under visible light irradiation. The synthesized nanoparticles were thoroughly characterized using Fourier Transform Infrared (FT-IR) spectroscopy, Raman spectroscopy, and X-ray Diffraction (XRD) to determine their chemical, structural, and crystalline properties. The optical properties of the nanoparticles, particularly their ability to absorb light, were also investigated, highlighting their importance in enhancing photocatalytic performance. Methyl Violet dye was selected as a model pollutant to assess the photocatalytic efficiency of these nanoparticles. The results showed that the CuAl 2 O 4 nanoparticles degraded about 72.49% of Methyl Violet in 120 min under UV and visible light, with the high efficiency attributed to the generation of electron-hole pairs and reactive oxygen species, including superoxide anions and hydroxyl radicals. These active agents are critical in the degradation process. The findings demonstrate the potential of CuAl 2 O 4 nanoparticles as nontoxic and highly effective photocatalysts for environmental remediation, offering a promising solution for treating wastewater contaminated with hazardous organic dyes. This study enhances the understanding of the photocatalytic behavior of CuAl 2 O 4 nanoparticles and emphasizes their potential in reducing environmental pollution through efficient degradation of harmful compounds.

chemistry, physical, analytical,biochemical research methods
S-Schematic CuWO 4 /ZnO nanocomposite boosted photocatalytic degradation of organic dye pollutants

Yupawan Koedsiri,Pongsaton Amornpitoksuk,Chamnan Randorn,Tanattha Rattana,Sujitra Tandorn,Sumetha Suwanboon

DOI: https://doi.org/10.1016/j.mssp.2024.108385

IF: 4.1

2024-04-06

Materials Science in Semiconductor Processing

Abstract:S-schematic CuWO 4 /ZnO nanocomposite photocatalyst was synthesized by an impregnation method. Synthesized CuWO 4 and ZnO nanoparticles, and CuWO 4 /ZnO nanocomposites were thoroughly characterized. X-ray diffraction (XRD) analysis of the CuWO 4 /ZnO nanocomposite confirmed the respective triclinic and hexagonal wurtzite structures of CuWO 4 and ZnO crystals. Raman and Fourier transform infrared (FTIR) spectra and X-ray photoelectron spectroscopy (XPS) revealed bond formations in CuWO 4 and ZnO, and confirmed the synthesis of the CuWO 4 /ZnO nanocomposite. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) revealed CuWO 4 nanoparticles adhered to ZnO aggregates. Energy dispersive X-ray spectrometry (EDS) confirmed the distribution of CuWO 4 on the ZnO aggregates. UV–Vis diffuse reflectance spectroscopy (DRS) showed optical bandgap energies of 2.36 eV for CuWO 4 and 3.18 eV for ZnO nanoparticles. The photocatalytic performance of the CuWO 4 /ZnO nanocomposite was investigated through the degradation of the cationic dyes methylene blue (MB) and Rhodamine B (RhB) and the anionic dye methyl orange (MO). A 5.0%CuWO 4 /ZnO nanocomposite degraded 100% of MB within 120 min, 91.02% of RhB within 300 min, and 89.13% of MO within 300 min. The pseudo-first order kinetic rate constant fit well for the degradation of all the dyes on the CuWO 4 /ZnO nanocomposite. The CuWO 4 /ZnO nanocomposite could better degrade the cationic dyes than the anionic dye in an aqueous solution. The hole (h + ), the hydroxyl radical ( • OH), and the superoxide ion ( • O2− ) were the active species responsible for degrading MB, RhB and MO dyes. The proposed CuWO 4 /ZnO nanocomposite could be applied for environment friendly wastewater treatment.

engineering, electrical & electronic,materials science, multidisciplinary,physics, condensed matter, applied
Concave octopus-like PtCu nanoframe mediated photo-electro Fenton catalysis for fast organic dyestuff elimination

Yangyang Yan,Ping Zhou,Heying Li,Xiaoran Liu,Manping Lin,Feihu Xie,Keke Zhang,Yi Zhang,Chenyang Zhang,Jiahua Shi,Jinghua Li,shaowen Cheng,shuang zhao

DOI: https://doi.org/10.1039/d2na00233g

IF: 5.598

2022-06-11

Nanoscale Advances

Abstract:In this work, a photo-electro Fenton catalytic nanoplatform based on concave octopus-like PtCu nanoframes was fabricated for organic dyestuff degradation. The electrochemical oxidation reaction was performed to generate hydrogen peroxide (H 2 O 2 ) on the interface of PtCu nanoframes via a promising electro-Fenton process for on-demand aqueous remediation.

materials science, multidisciplinary,nanoscience & nanotechnology,chemistry
Heterogeneous Cu–Sn-PPy mediated synergistic photo-Fenton and photothermal catalysis for dye elimination

Jingpi Gao,En Li,Kena Song,Tongtong Ma,Ran Yang,Yi Zhang,Nan Li,Xiaoran Liu,Jinghua Li

DOI: https://doi.org/10.1016/j.matchemphys.2023.128251

IF: 4.778

2023-07-28

Materials Chemistry and Physics

Abstract:The dye degradation method based on Fenton-like heterogeneous nanostructures has gained significant attention in recent years. We have developed a Copper-Stannum-Polypyrolle-Heterogeneous (Cu–Sn oxide-PPy Heterogeneous, CSPHGs) catalytic system. The system uses a PN junction formed by two oxide semiconductors (Cu 2 O and SnO 2 ) as the core, which is then coated with polypyrolle (PPy) on the outer layer. Under near-infrared (NIR) light irradiation (500.0 μg ml −1 , 1.2w·cm −2 ), the temperature rapidly reached approximately 45 °C within 5 min, demonstrating excellent photothermal performance. We have overcome the limitation of traditional Fenton reactions that require weak acidic conditions for effective operation. Moreover, we have increased the photostability of Cu 2 O monomers by incorporating them into a three-layer heterostructure. The Rhodamine B (RhB) degradation experiment revealed that the generated reactive oxygen species (·OH), effectively catalyze the decomposition of dyes. Within 120 min, the degradation rate exceeded 99%. This research provides a new option for environmental remediation through the combination of photo-Fenton and photothermal processes.

materials science, multidisciplinary
Oxygen vacancy engineering of ultra-small CuWO 4 nanoparticles for boosting photocatalytic organic pollutant degradation

Dingzhou Xiang,Xin Jin,Guilin Sun,Chenghuan Zhong,Shan Gao

DOI: https://doi.org/10.1039/d4dt00628c

IF: 4

2024-04-18

Dalton Transactions

Abstract:Nanomaterials have attracted great interest in the field of photocatalytic degradation due to their larger specific surface area and efficient charge/mass transfer ability, which are beneficial for enhancing photocatalytic activity. However, the bandgap of photocatalysts would increase with the size reduction, weakening the photoabsorption ability. Thus the relationship between the size of catalysts and photoactivity should be balanced to achieve optimal photocatalytic performance. Herein, ultra-small CuWO 4 nanoparticles ( ca. 39 nm) with moderate oxygen vacancies (CuWO 4 –OVs) were synthesized by the cascade strategy (ligand confinement@fast calcination). The introduction of oxygen vacancies offset the deficiency of light absorption ability caused by the small size effect. Besides, oxygen vacancies could provide more reaction active sites, conducive to the adsorption and activation of dye molecules and H 2 O. Degradation experiments reveal that the optimized photocatalyst CuWO 4 –OVs 350 shows outstanding photocatalytic activity, and the removal ratio of methylene blue (MB) reaches over 90.26% in 70 min, exceeding that of pure CuWO 4 –air (37.66%). Additionally, the degradation performance of CuWO 4 –OVs 350 surpasses most of the other CuWO 4 -based photocatalytic systems. More importantly, the photocatalytic degradation activity of CuWO 4 –OVs 350 could remain at 88.26% even after five cycles, and high photostability was achieved. This work affords constructive inspiration for synergistic photoactivity enhancement and increase of catalyst reaction active sites to achieve eminent photocatalytic degradation performance.

chemistry, inorganic & nuclear
0D carbon dots intercalated Z-scheme CuO/g-C 3 N 4 heterojunction with dual charge transfer pathways for synergetic visible-light-driven photo-Fenton-like catalysis

Xiaocui Wu,Qingshan Zhao,Jinqiang Zhang,Shuli Li,Hui Liu,Kai Liu,Yiwen Li,Demin Kong,Hongqi Sun,Mingbo Wu

DOI: https://doi.org/10.1016/j.jcis.2022.12.052

IF: 9.9

2022-12-26

Journal of Colloid and Interface Science

Abstract:Photo-Fenton-like catalysis allows development of novel advanced oxidation technology with promising application in wastewater treatment. In this work, carbon dots (CDs) were intercalated between CuO nanoparticles and coralloid flower-like graphitic carbon nitride (g-C 3 N 4 ) to fabricate a ternary CuO/CDs/g-C 3 N 4 hybrid for synergetic visible-light-driven photo-Fenton-like oxidation. The CuO/CDs/g-C 3 N 4 hybrid showed remarkable degradation efficiency towards recalcitrant organic contamination, excellent tolerance to realistic environmental conditions, exceptional stability and wide universality, declaring great potential for practical applications. •OH and •O 2 − radicals were demonstrated to be the primary contributors in the photo-Fenton-like system. Mechanism studies reveal dual charge transfer pathways in the Z-scheme CuO/g-C 3 N 4 heterojunction assisted by interfacial electron transmission bridges of CDs, which can simultaneously boost the reduction of Cu 2+ to Cu + in the Fenton-like cycle and accelerate the Z-scheme electron flow from CuO to g-C 3 N 4 , leading to synergistic enhancement of the catalytic performance. This work would afford a feasible strategy to develop reinforced solar energy-assisted photo-Fenton-like catalysis systems for water remediation.

chemistry, physical
Enhanced Photocatalytic Efficiency in Degrading Organic Dyes by Coupling CdS Nanowires with ZnFe2O4 Nanoparticles

Lei Zou,Haoran Wang,Xiaoyu Jiang,Guoliang Yuan,Xiong Wang

DOI: https://doi.org/10.1016/j.solener.2019.11.077

IF: 7.188

2019-01-01

Solar Energy

Abstract:One-dimensional ZnFe2O4-decorated CdS 0D/1D composites were successfully prepared by a low-temperature hydrothermal method. The existence of ZnFe2O4 nanoparticles could greatly prevent the CdS nanowires from agglomerating. Compared with primary CdS nanowires and ZnFe2O4 nanoparticles, the photoactivity of CdS/ZnFe2O4 composites with the optimal ratio was respectively enhanced by 2.3 and 6.6 times in the process of photodegrading organic molecules. The proposed photocatalytic mechanism was verified by a radical trapping test. The improved stability and the prolonged carriers lifetime in the composites were ascribed to the existing built-in field in the interface, facilitating the fast separation of photoinduced charge carriers. It was further validated by the room-temperature photoluminescence and the electrochemical impedance spectra.
Steering oxygen vacancies for the enhanced photocatalytic degradations of dyes and tetracycline over Cu, Yb co-doped SnO2 with efficient charge separation and transfer

Zhenzhen Yu,Ruowen Liang,Man Zhou,Kai Yang,Ping Mu,Kangqiang Lu,Weiya Huang,Shaobo Ouyang,Zhengquan Li,Changlin Yu

DOI: https://doi.org/10.1016/j.jtice.2022.104249

IF: 5.477

2022-04-01

Journal of the Taiwan Institute of Chemical Engineers

Abstract:Background The antibiotic and dyes disposals are the promising strategy for the persistent environmental problems. For the photocatalytic process, charge separation and transfer are the key issue, in which its rate should be faster than that of the recombination to participate into the chemical reactions. Methods In this work, we exploited the Cu, Yb co-doped SnO2 via one-step hydrothermal method. The enhanced charge transfer rate was characterized by XPS, photocurrent, electrochemical impedance spectra, photoluminescence and EPR measurements. Significant findings Benefiting from higher charge transfer rate, co-doping of Cu and Yb into SnO2 could achieve superior photocatalytic activities for the degradations of dyes and tetracycline. The result confirmed that the introductions of Cu and Yb could redistribute the photo-induced carriers on the surface of SnO2. In addition, the photogenerated electrons were captured by the defective sites, and thus it facilitated the efficient charge transfer over SnO2.

engineering, chemical
Photocatalytic Performance Enhancement of CuO/Cu2O Heterostructures for Photodegradation of Organic Dyes: Effects of CuO Morphology

Denghui Jiang,Jianbin Xue,Liqiong Wu,Wei Zhou,Yuegang Zhang,Xinheng Li

DOI: https://doi.org/10.1016/j.apcatb.2017.04.034

2017-01-01

Abstract:Cuprous oxide is a promising candidate for photocatalysis. But its photocatalytic properties still need to be much improved for applications. Herein, we report a kind of heterostructures (HCs), i.e. CuO/Cu2O HCs. Different morphologies of CuO, i.e. nanowires, nanotetrahedra and nanospheres, have been controllably prepared on Cu2O cubes/octahedra by a facile wet chemical method. All the obtained CuO/Cu2O HCs have significantly improved photocatalytic activity and stability as compared to Cu2O. Especially, the nanowires CuO/Cu2O have shown a specific reaction rate ca. 1.6 mol min 1 g(-1), 260 times as high as pristine Cu2O and 4 times as Au/Cu2O. And the nanospheres CuO/Cu2O have maintained over 95% of photocatalytic activity after 7 cycles. So, distinct morphologies of CuO have resulted in dramatic effects on photocatalytic properties of CuO/Cu2O HCs. (C) 2017 Elsevier B.V. All rights reserved.
Efficient degradation of dye pollutants on nanoporous polyoxotungstate–anatase composite under visible-light irradiation

Yu Yang,Qingyin Wu,Yihang Guo,Changwen Hu,Enbo Wang

DOI: https://doi.org/10.1016/j.molcata.2004.08.031

2005-01-01

Abstract:A novel photocatalyst, nanoporous anatase TiO2 crystalline particles coupled by homogeneously dispersed Keggin unit, H3PW12O40/TiO2, was prepared by a simple and rapid process, i.e., at a lower temperature (200°C) by combined sol–gel and programmed temperature hydrothermal methods. The resulting material was characterized by UV diffuse reflectant spectroscopy, XRD, 31P MAS NMR, TEM, and nitrogen adsorption. This new photocatalyst exhibited visible-light photocatalytic activity to decompose 10 various organic dyes in aqueous systems. It was attempted to determine the feasibility of such a degradation by varying the chemical structures, either azoic (Congo Red (CR), Methyl Orange (MO), Ponceau G (PG), Orange II (OII), and Eriochrome Blue Black B (EB)), or anthraquinonic (Alizarin S (AS)), or heteropolyaromatic (Methylene Blue (MB)), or fluorescent (Neutral Red (NR), Rhodamine B (RB)), or sulfonic (Fuchsin Acid (FA)). The intermediates and the final products of degradation were detected by electrospray mass spectrometer (ES-MS) and ion chromatography (IC). According to the experimental results, we proposed a possible mechanism of the photodegradation of dyes under visible-light irradiation in the aqueous system.
Green Synthesis and Photocatalytic Dye Degradation Activity of CuO Nanoparticles

Sadia Aroob,Sónia A. C. Carabineiro,Muhammad Babar Taj,Ismat Bibi,Ahmad Raheel,Tariq Javed,Rana Yahya,Walla Alelwani,Francis Verpoort,Khanita Kamwilaisak,Saleh Al-Farraj,Mika Sillanpää

DOI: https://doi.org/10.3390/catal13030502

IF: 3.9

2023-03-01

Catalysts

Abstract:The degradation of dyes is a difficult task due to their persistent and stable nature; therefore, developing materials with desirable properties to degrade dyes is an important area of research. In the present study, we propose a simple, one-pot mechanochemical approach to synthesize CuO nanoparticles (NPs) using the leaf extract of Seriphidium oliverianum, as a reducing and stabilizing agent. The CuO NPs were characterized via X-ray diffraction (XRD), scanning electron microscopy (SEM), photoluminescence (PL) and Fourier-transform infrared spectroscopy (FTIR). The photocatalytic activity of CuO NPs was monitored using ultraviolet-visible (UV-Vis) spectroscopy. The CuO NPs exhibited high potential for the degradation of water-soluble industrial dyes. The degradation rates for methyl green (MG) and methyl orange (MO) were 65.231% ± 0.242 and 65.078% ± 0.392, respectively. Bio-mechanochemically synthesized CuO NPs proved to be good candidates for efficiently removing dyes from water.

chemistry, physical
Synergistic Effect of Cu-ion and WO3 Nanofibers on the Enhanced Photocatalytic Degradation of Rhodamine B and Aniline Solution

Ge Ma,Junlin Lu,Qingguo Meng,Haiqin Lv,Lingling Shui,Yongguang Zhang,Mingliang Jin,Zhihong Chen,Mingzhe Yuan,Richard Notzel,Xin Wang,Chuanyi Wang,Jun-Ming Liu,Guofu Zhou

DOI: https://doi.org/10.1016/j.apsusc.2018.04.236

IF: 6.7

2018-01-01

Applied Surface Science

Abstract:In this work, a series of efficient visible-light-driven WO3/Cu (II) nanofiber photocatalysts, with superior photocatalytic activities for the degradation of dyes and aniline, were prepared by electrospinning and impregnation methods. The impregnation method brought about homogeneous distribution of Cu (II) species on the surface of WO3 nanofibers. The prepared WO3/Cu (II) nanofiber photocatalysts exhibited enhanced visible-light absorption and reduced charge recombination, as compared to pure WO3 nanofibers, due to the interfacial charge transfer (IFCT) effect between the Cu (II) species and WO3. The combined benefits of the grafting Cu (II) species on the surface of WO3, in terms of optical, surface, and texture properties, led to a significant improvement in the photocatalytic activity for the degradation of Rhodamine B (Rh B) and aniline under conditions of visible light irradiation. Upon the irradiation with visible light in the presence of WO3/Cu (II)-2% photocatalyst, the concentration of Rhodamine B (Rh B) decreased from 10 mg/L to 1.5 mg/L, and that of aniline solution decreased from 5 mg/L to 0.728 mg/L over a period of 3 h. And after running five cycles, the concentration of aniline solution could decrease from 5 mg/L to 0.89 mg/L by WO3/Cu (II)-2% photocatalyst. (C) 2018 Published by Elsevier B.V.
Nanosized CuFe2O4/active carbon composite for efficient photocatalytic degradation towards organic dyes

Hemalatha, J.,Senthil, M.

DOI: https://doi.org/10.1007/s10854-024-13249-1

2024-08-25

Journal of Materials Science Materials in Electronics

Abstract:Activated carbon/CuFe 2 O 4 composite was made using a hydrothermal process. X-ray diffraction (XRD), transmission electron microscopy (TEM), nitrogen adsorption isotherms, vibrating sample magnetometer (VSM), UV–visible diffuse reflectance spectra (DRS), and Fourier transform infrared (FT-IR) spectroscopy were used to characterise the CuFe 2 O 4 /AC composites that were synthesised using the previously mentioned method. Each phase's existence is confirmed by XRD, and TEM revealed the spherically shaped nanoparticles. The Fe–O, Cu–O, and AC vibration modes in the composite are validated by the infrared spectra. Under 60 min of visible light irradiation, the 10%-CuFe 2 O 4 /AC composite, which has a bandgap of 2.19 eV and soft-ferromagnetic characteristics, demonstrated strong photocatalytic activity in decomposing MB (50 ppm, 30 mL) up to 99.5%. Through preservation of its high percentage of dye degradation, the 10%-CuFe 2 O 4 /AC composite may be used again. The results of the radical trapping experiments indicate that the primary active species involved in the photocatalytic degradation process are superoxide (O 2 − ) and hydroxyl (OH*). Five cycles of the photocatalyst's recyclability were investigated, and the results showed that the replicated catalysts showed very little rate variations. An effective photocatalyst for the breakdown of wastewater dye is CuFe 2 O 4 /AC.

engineering, electrical & electronic,materials science, multidisciplinary,physics, condensed matter, applied
Enhanced Photodegradation of Organic Dyes Using Copper and Zinc Aluminate Nanophotocatalysts

Naeem Akbar,Muhammad Javed,Asad Masood,Ayaz Arif Khan,Naeem Ahmed,Yousaf Iqbal,Ali Shaikh Abdul Hameed

DOI: https://doi.org/10.1016/j.jallcom.2024.176980

IF: 6.2

2024-10-12

Journal of Alloys and Compounds

Abstract:This study aims to enhance the photocatalytic efficiency of Cu x Zn 1-x Al 2 O 4 (x = 0.0, 0.2, 0.4, 0.6, and 0.8) nanophotocatalysts synthesized via a sol-gel self-combustion method. Rietveld analysis confirmed the formation of single-phase spinels with a face-centered cubic structure and Fd-3m space group symmetry, while electron density distribution analysis supported the ionic character of bonding within the material. Subsequent UV-visible spectroscopy revealed that the addition of Cu(II) reduced the band gap from 4.66 eV to 2.54 eV, facilitating enhanced light absorption. Consequently, the catalyst with x = 0.8 deteriorated 95% of methyl orange (MO) and 93% of rhodamine-B (RhB) in 120 minutes of visible light irradiation, following a pseudo-first-order kinetic model. The Cu 0.8 Zn 0.2 Al 2 O 4 sample demonstrated significant reusability and stability, with degradation rates of 93-79% for RhB and 95-81% for MO after four cycles. Scavenging studies indicated that photoexcited holes (h), hydroxyl radicals (OH•), and superoxide radicals (O2•−) were key factors in the degradation process. This study presents an improved approach for enhancing the photodegradation performance of the Cu 0.8 Zn 0.2 Al 2 O 4 catalyst for pharmaceutical and wastewater treatment applications.

materials science, multidisciplinary,chemistry, physical,metallurgy & metallurgical engineering
Co3O4 Nanopetals Grown on the Porous CuO Network for the Photocatalytic Degradation

Yuntao Sun,Can Wang,Shengyao Qin,Fengda Pan,Yongyan Li,Zhifeng Wang,Chunling Qin

DOI: https://doi.org/10.3390/nano12162850

IF: 5.3

2022-08-18

Nanomaterials

Abstract:Designing a novel photocatalytic composite for the efficient degradation of organic dyes remains a serious challenge. Herein, the multi-layered Co3O4@NP-CuO photocatalyst with unique features, i.e., the self-supporting, hierarchical porous network as well as the construction of heterojunction between Co3O4 and CuO, are synthesized by dealloying-electrodeposition and subsequent thermal treatment techniques. It is found that the interwoven ultrathin Co3O4 nanopetals evenly grow on the nanoporous CuO network (Co3O4@NP-CuO). The three-dimensional (3D) hierarchical porous structure for the catalyst provides more surface area to act as active sites and facilitates the absorption of visible light in the photodegradation reaction. Compared with the commercial CuO and Co3O4 powders, the newly designed Co3O4@NP-CuO composite exhibits superior photodegradation performance for RhB. The enhanced performance is mainly due to the construction of heterojunction of Co3O4/CuO, greatly promoting the efficient carrier separation for photocatalysis. Furthermore, the possible photocatalytic mechanism is analyzed in detail. This work provides a promising strategy for the fabrication of a new controllable heterojunction to improve photocatalytic activity.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology,chemistry
Proficient Photocatalytic and Sonocatalytic Degradation of Organic Pollutants Using CuO Nanoparticles

Moondeep Chauhan,Navneet Kaur,Pratibha Bansal,Rajeev Kumar,Sesha Srinivasan,Ganga Ram Chaudhary

DOI: https://doi.org/10.1155/2020/6123178

IF: 3.791

2020-06-10

Journal of Nanomaterials

Abstract:In recent years, due to the advancement in nanotechnology, advanced oxidation processes (AOPs), especially sonocatalysis and photocatalysis, have become a topic of interest for the elimination of pollutants from contaminated water. In the research work reported here, an attempt has been made to study and establish a physicochemical mechanism for the catalytic activity of copper oxide nanoparticles (CuO NPs) in AOPs using the degradation of dyes as model contaminants. CuO NPs exhibited brilliant sonocatalytic and photocatalytic activities for the degradation of a cationic dye (Victoria Blue) as well as an anionic dye (Direct Red 81). The degradation efficiency of CuO NPs was calculated by analysing the variation in the absorbance of dye under a UV-Vis spectrophotometer. The influence of different operating parameters on the catalytic activity of CuO NPs, such as the amount of catalysts dose, pH of the solution, and the initial dye concentration, was thoroughly investigated. In addition, the kinetic process for the degradation was also examined. It was observed that both dyes exhibited and followed the pseudo-first-order kinetics relation. The rate constant for sonocatalysis was high as compared to photocatalysis. The rate constant for both sonocatalysis and photocatalysis was successfully established, and reusability tests were done to ensure the stability of the used catalysts. To get an insight into the degradation mechanism, experiments were performed by using ⋅ OH radical scavengers. The efficacy of CuO NPs for dye decolorization was found to be superior for the sonocatalyst than the photocatalyst.

materials science, multidisciplinary,nanoscience & nanotechnology
Investigation and mitigation of degradation mechanisms in Cu2O photoelectrodes for CO2 reduction to ethylene

Guiji Liu,Fan Zheng,Junrui Li,Guosong Zeng,Yifan Ye,David M. Larson,Junko Yano,Ethan J. Crumlin,Joel W. Ager,Lin-wang Wang,Francesca M. Toma

DOI: https://doi.org/10.1038/s41560-021-00927-1

IF: 56.7

2021-11-08

Nature Energy

Abstract:The chemical transformations that occur in metal oxides under operating conditions limit their applications for artificial photosynthesis. Understanding these chemical changes is a prerequisite to achieve sustainable production of solar fuels and chemicals. Herein, we use a correlative approach to unravel how cuprous oxide (Cu2O) photoelectrodes change under reaction conditions and, consequently, provide a protection scheme to mitigate degradation. In agreement with theoretical predictions, we find that under illumination the Cu2O concurrently undergoes reduction by photoelectrons and oxidation by holes in the material at electrolyte-dependent degradation rates. These mechanistic insights led us to design a protection scheme that uses a silver catalyst to accelerate transfer of photogenerated electrons and a Z-scheme heterojunction to extract holes. The resulting photocathode exhibits a stable photocurrent for CO2 reduction with ~60% Faradaic efficiency for ethylene with a balance of hydrogen for hours, whereas bare Cu2O degrades within minutes.

materials science, multidisciplinary,energy & fuels
Enhanced photocatalytic activity of Cu2O for visible light-driven dye degradation by carbon quantum dots

Huihui Feng,Yan Zhang,Fengling Cui

DOI: https://doi.org/10.1007/s11356-021-16337-5

IF: 5.8

2021-09-07

Environmental Science and Pollution Research

Abstract:Cuprous oxide (Cu2O), a p-type semiconductor material, plays an important role in photocatalysis, which has narrower band gap (~2.1 eV), abundant availability, and low toxicity. However, the applications of Cu2O are mainly restricted by its high recombination rate and low charge collection. Hence, it is of great significance to find an efficient method to improve the photocatalytic activity of Cu2O. In this work, the CQDs-loaded Cu2O nanocomposites (CQDs/Cu2O) were successfully obtained via hydrothermal method. It was worth noting that the CQDs/Cu2O nanocomposite displayed improved photocatalytic activity compared to that of pure Cu2O with a lower dosage (25 mg) under visible light, which could completely degrade the methylene blue in 8 min. The recycling experiments also showed that the photocatalytic activity still remained up to 90% after 8 cycles. In addition to the photodegradation of methylene blue, the CQDs/Cu2O nanocomposite also had an excellent antibacterial activity against Escherichia coli (100%, 30 min). These results demonstrated that introducing CQDs to Cu2O was a feasible method to improve the photocatalytic performance of Cu2O.

environmental sciences

Efficient Photo-Degradation of Dyes Using Cuwo4 Nanoparticles with Electron Sacrificial Agents: A Combination of Experimental and Theoretical Exploration

Advances in Photocatalytic Degradation of Dyestuffs with TiO2

Localized Electric Field‐Induced Efficient Photocatalytic Oxidation over Cu‐Doped WO3 Nanofibers with Strong Dopant/Matrix Interaction

Optimization of CuAl2O4 Nanoparticles for Enhanced Photocatalytic Degradation of Organic Dyes Under UV and Visible Light

S-Schematic CuWO 4 /ZnO nanocomposite boosted photocatalytic degradation of organic dye pollutants

Concave octopus-like PtCu nanoframe mediated photo-electro Fenton catalysis for fast organic dyestuff elimination

Heterogeneous Cu–Sn-PPy mediated synergistic photo-Fenton and photothermal catalysis for dye elimination

Oxygen vacancy engineering of ultra-small CuWO 4 nanoparticles for boosting photocatalytic organic pollutant degradation

0D carbon dots intercalated Z-scheme CuO/g-C 3 N 4 heterojunction with dual charge transfer pathways for synergetic visible-light-driven photo-Fenton-like catalysis

Enhanced Photocatalytic Efficiency in Degrading Organic Dyes by Coupling CdS Nanowires with ZnFe2O4 Nanoparticles

Steering oxygen vacancies for the enhanced photocatalytic degradations of dyes and tetracycline over Cu, Yb co-doped SnO2 with efficient charge separation and transfer

Photocatalytic Performance Enhancement of CuO/Cu2O Heterostructures for Photodegradation of Organic Dyes: Effects of CuO Morphology

Efficient degradation of dye pollutants on nanoporous polyoxotungstate–anatase composite under visible-light irradiation

Green Synthesis and Photocatalytic Dye Degradation Activity of CuO Nanoparticles

Synergistic Effect of Cu-ion and WO3 Nanofibers on the Enhanced Photocatalytic Degradation of Rhodamine B and Aniline Solution

Nanosized CuFe2O4/active carbon composite for efficient photocatalytic degradation towards organic dyes

Enhanced Photodegradation of Organic Dyes Using Copper and Zinc Aluminate Nanophotocatalysts

Co3O4 Nanopetals Grown on the Porous CuO Network for the Photocatalytic Degradation

Proficient Photocatalytic and Sonocatalytic Degradation of Organic Pollutants Using CuO Nanoparticles

Investigation and mitigation of degradation mechanisms in Cu2O photoelectrodes for CO2 reduction to ethylene

Enhanced photocatalytic activity of Cu2O for visible light-driven dye degradation by carbon quantum dots