Abstract:All-conjugated rod-rod block copolymers (BCPs) have gained immense interest over the past few years because they combine fascinating self-assembly properties of BCPs with the optical and electronic properties of conjugated polymers. Based on it, an all-conjugated rod-rod BCPs, poly(3-hexylselenophene)-b-poly[3-(6-hydroxyl) hexylthiophene] (P3HS-b-P3HHT) with hydroxyl groups as side substitution groups was synthesized via the Grignard metathesis (GRIM) method. The introduction of side hydroxyl groups was designed to endow different polarity between P3HS and P3HHT blocks and enrich the solution structures of P3HS-b-P3HHT. During thermal annealing, the cross-linking of hydroxyl groups was also utilized to improve the thermal stability of poly(3-hexylthiophene) (P3HT)-based organic field-effect transistors (OFETs) when blended with a certain amount of P3HS-b-P3HHT. On one hand, the use of mixed solvents provided an effective way to control the self-assembly behavior of P3HS-b-P3HHT. Depending on the mixed solvent ratio (i.e., chloroform/pyridine or methanol/pyridine), the rod-rod interaction of the copolymer chains was controlled, yielding a series of nanostructures such as nanoribbons, nanofibers, and nanospheres. Detailed morphologies and the corresponding photophysical behavior of different nanostructures were characterized by transmission electron microscope and UV-vis absorption spectra. The conformations of the P3HS and P3HHT chains in the solutions influenced their photophysical properties greatly. On the other hand, based on the thermal cross-linkable properties of hydroxyl groups, a certain amount of P3HS-b-P3HHT was mixed with P3HT homopolymer to fabricate P3HS-b-P3HHT/P3HT OFETs. For control samples, the charge carrier mobility of pure P3HT-based OFETs was improved with the increased annealed temperatures up to 170 degrees C, then decreased significantly when the temperature further increased to 200 degrees C. While overall, the charge carrier mobilities of P3HS-b-P3HHT/P3HT OFETs were lower than those of pure P3HT-based OFETs, they were improved with the increased temperature to 200 degrees C. It was found the P3HS-b-P3HHT(10%)/P3HT OFETs exhibited the charge carrier mobility of 0.040 cm(2).V-1.s(-1) after annealing at 200 degrees C for 1 h, which was higher than P3HT OFETs (0.025 cm(2).V-1.s(-1)) under the same experimental condition. It was due to the cross-linking of hydroxyl groups in P3HS-b-P3HHT retain the crystallization structures of P3HT, thus improved the thermal stability of OFETs. Overall, this work demonstrates a new polythiophene-polyselenophene BCP with controlled nanostructures by solvent blending and promising application in OFETs to improve their thermal stability.

Synthesis, Characterization, And Solution Structure Of All-Conjugated Polyelectrolyte Diblock Copoly(3-Hexylthiophene)S

Insights Into Poly(3-Hexylthiophene)-B-Poly(Ethylene Oxide) Block Copolymer: Synthesis And Solvent-Induced Structure Formation In Thin Films

Synthesis, Cocrystallization, and Microphase Separation of All-Conjugated Diblock Copoly(3-alkylthiophene)s

Controlled synthesis and optical investigation of conjugated rod-coil diblock copolymer based on poly(3-hexylthiophene) and poly(2-(dimethylamino)ethyl methacrylate-random-1-pyrenylmethyl methacrylate-random-methacrylate spirooxazine)

Crystallization-driven self-assembly of poly(3-hexylthiophene)- b -poly( 2,5-bis(2-ethylhexyloxy) p -phenylene), a π-conjugated diblock copolymer with a rigid rod corona-forming block

Controlling the morphology and crystallization of a thiophene-based all-conjugated diblock copolymer by solvent blending.

Synthesis and Properties of an All-Conjugated Polythiophene-Polyselenophene Diblock Copolymer

All-Conjugated Block Copolymers And Conjugated Polymer/Nanocrystal Nanocomposites: From Synthesis, Self-Assembly To Energy Application

Self-assembly of all-conjugated poly(3-alkylthiophene) diblock copolymer nanostructures from mixed selective solvents.

Improved Self-Assembly of P3HT with Pyrene-Functionalized Methacrylates

Conjugated Polymers Based on A New Building Block: Dithienophthalimide

Synthesis, Photophysics and Electroluminescent Properties of a Novel Phenylene-Ethynylene and Bezothiadiazole Alternating Copolymer

Synthesis, Electrochemical, and Optical Properties of a Novel PPV/PPE Block-Copolymer

Synthesis of liquid crystalline poly(1-pentyne)s and fabrication of polyacetylene–perovskite hybrids

All-Conjugated Poly(3-Alkylthiophene) Diblock Copolymer-Based Bulk Heterojunction Solar Cells With Controlled Molecular Organization And Nanoscale Morphology

A Novel Series Of P-N Diblock Light-Emitting Copolymers Based On Oligothiophenes And 1,4-Bis(Oxadiazolyl)-2,5-Dialkyloxybenzene

Synthesis, characterization, and semiconducting properties of π-conjugated polymers containing hydrogen bonded bis-pyridine-thieno[3,2-b]thiophene moieties

Hydrogen-bonding-directed Helical Nanofibers in a Polythiophene-Based All-Conjugated Diblock Copolymer

Morphology control of poly(3‐hexylthiophene)‐b‐poly(ethylene oxide) block copolymer by solvent blending

Electrochemical Synthesis and Electro-Optical Properties of Dibenzothiophene/Thiophene Conjugated Polymers With Stepwise Enhanced Conjugation Lengths

Electrochemical synthesis of conjugated copolymer poly(3-hexylthiophene-co-dithenopyrrole): Stepwise approach to enhance electro-optical properties