Abstract:Nowadays, waste plastics made a significant environmental problems. Chemical converting of the polymers to valuable liquids is a promising method to solve the problem and make excellent benefit. This study investigates the utilization of kaolin, a natural resource, for synthesizing zeolite Na-A and significance of the catalyst crystallinity on the catalytic cracking of a 50:50 mixture of polystyrene (PS) and low-density polyethylene (LDPE). This research aims to identify the optimal hydrothermal conditions for producing crystalline zeolite Na-A and evaluate the effect of crystallinity of synthesized zeolite Na-A on production of liquids. A central composite design (CCD) model is employed to achieve this, selecting three independent variables: hydrothermal temperature (80, 85, 90, 95 and 100 °C), the molarity of the alkaline solution (NaOH concentration = 1,2,3,4 and 5 molar), and hydrothermal time (8, 10.43, 14, 17.56 and 20 h). Fourier transform infrared spectroscopy (FTIR) determines the functional groups which proves the presence of sodium aluminosilicate in the synthesized zeolite. The crystallinity of the produced zeolite Na-A is evaluated through X-ray diffraction (XRD) analysis, optimizing the results using the CCD model. Scanning electron microscopy (SEM) reveals well-formed cubic crystalline structures of zeolite Na-A. The optimum conditions for polymer cracking are determined as hydrothermal temperature of 89 °C, a hydrothermal time of 13 h, and a NaOH molarity of 2.8, while predicted liquid production was obtained 81%. The analysis of ANOVA indicates that the designed model based on CCD calculations is valid for prediction of the process. Finally, gas chromatography with flame ionization detection (GC-FID) is employed to characterize the main resulting value-added components (styrene, toluene, and ethylbenzene) under optimum conditions.

Producing Pyridines Via Thermocatalytic Conversion and Ammonization of Waste Polylactic Acid over Zeolites

Melt Polycondensation of L‐lactic Acid Catalyzed by 1,3‐dialkylimidazolium Ionic Liquids

Production of Acetonitrile Via Catalytic Fast Pyrolysis of Biomass Derived Polylactic Acid under Ammonia Atmosphere

Towards the sustainable production of pyridines via thermo-catalytic conversion of glycerol with ammonia over zeolite catalysts

Producing Pyridines Via Thermo-Catalytic Conversion and Ammonization of Glycerol over Nano-Sized HZSM-5

Catalytic Amination of Polylactic Acid to Alanine.

Alanine Production from Chemical Upcycling of Polylactic Acid Waste over Fe Doped Ru/CeO2

Alcoholysis of Waste PLA-based Plastics to Methyl Lactate over Sulfated ZrO2/SiO2 Catalyst

Amination of Polylactic Acid to Alanine by Ru-Co Bimetallic Catalyst

Immobilized Deep Eutectic Solvent ChCl–2ZnCl2@ZIF-8 Composite as an Efficient and Reusable Catalyst for the Methanolysis of Poly(lactic Acid)

Catalytic Recycling of Polylactic Acid over Zirconium Phosphate Supported WOr Active Sites

Photocatalytic Upgrading of Polylactic Acid Waste into Alanine under Mild Conditions

Sustainable production of aromatics via catalytic pyrolysis of polyolefins towards the carbon cycle for plastics

Catalytic Cracking of Polystyrene and Low-Density Polyethylene over Synthesized Zeolite Na-A with Optimized Crystallinity

Sustainable Efficient Synthesis of Pyrrolidones from Levulinic Acid over Pd/C Catalyst

Electrochemical Upgrading of Waste Polylactic Acid Plastic for the Coproduction of C2 Chemicals and Green Hydrogen

Production of monocyclic aromatics and light olefins through ex-situ catalytic pyrolysis of low-density polyethylene over Ga/P/ZSM-5 catalyst

Valorization of polylactic acid to 2-bromopropionates and lactates

Synthesis of Poly(Lactic Acid) from Ammonium Lactate Fermentation Broth of Food Waste

Methanolysis of Poly(lactic Acid) Using Catalyst Mixtures and the Kinetics of Methyl Lactate Production

Integrated Production of Aromatic Amines and N-Doped Carbon from Lignin Via Ex Situ Catalytic Fast Pyrolysis in the Presence of Ammonia over Zeolites