Abstract:Perovskite oxide La0.6Sr0.4Co0.2Fe0.8O3-delta (LSCF6428), a wonderful electronic-ionic conductor could be used as cathode of solid oxide fuel cell (SOFC). Graded cathode with coarse layer and fine layer, could improve the diffusion rate and electrochemical reaction activity of oxidant. The fabrication and properties of graded LSCF6428 cathode were discussed in this paper. First, pure perovskite LSCF6428 powders were prepared by citrate-EDTA method (CEM), citrate method (CM) and solid phase synthesis (SPS). The powders with higher specific surface area and smaller grain size are easier to be sintered and densified. Single LSCF6428 cathode with thickness of 30 mu m was prepared by SPS powders, the porosity of cathode was high about 30% and pore size was about 5 mu m. Graded LSCF6428 cathode including 30 gm outer layer and 10 mu m inner layer was prepared by SPS and CM powders, respectively. Clear double-layer cathode was observed by SEM, which combined tightly and transited gradually. Porosity of outer layer is high about 30% and pore size is about 1-5 mu m; inner layer is finer and pore size is about 0.2-1 mu m. Based on the above research, 300 mu m yttria stabilized zirconia (YSZ) electrolyte supported cell with single LSCF6428 cathode and double-layer LSCF6428 cathode were prepared, and the properties of two type cells were tested in H-2. Power density of graded cell is 197 mW cm(-2) at 950 degrees C, and improved about 46% comparing that of single layer LSCF6428 cell (135 mW cm(-2)). (C) 2007 Elsevier B.V. All rights reserved.

Preparation and Electrochemical Performance of (La,sr)(co,fe)o3-Δ Cathode for Solid Oxide Fuel Cells

Low-temperature Solid Oxide Fuel Cells with Novel La0.6Sr0.4Co0.8Cu0.2O3−δ Perovskite Cathode and Functional Graded Anode

Preparation, Structure and Performance of La0.6Sr0.4Co0.2Fe0.8O3 Cathodes of Intermediate Temperature Solid Oxide Fuel Cells

Fabrication and Optimization of La 0.4 Sr 0.6 Co 0.2 Fe 0.7 Nb 0.1 O 3- Δ Electrode for Symmetric Solid Oxide Fuel Cell with Zirconia Based Electrolyte

Electrochemical Stability of La0.6Sr0.4Co0.2Fe0.8O3−δ-infiltrated YSZ Oxygen Electrode for Reversible Solid Oxide Fuel Cells

Preparation and Characterization of Graded Cathode La0.6Sr0.4Co0.2Fe0.8O3−δ

Validation and Electrochemical Characterization of LSCF Cathode Deposition on Metal Supported SOFC

Preparation and Performance of Tri-layer Composite Anode Supported Fuel Cell

High performance La2NiO4+δ impregnated La0.6Sr0.4Co0.2Fe0.8O3-δ cathodes for solid oxide fuel cells

Preparation And Characterization Of Graded Cathode La0.6sr0.4co0.2fe0.8o3-Delta

LaCrO3-Coated La0.6Sr0.4Co0.2Fe0.8O3−δ Core–Shell Structured Cathode with Enhanced Cr Tolerance for Intermediate-Temperature Solid Oxide Fuel Cells

Synthesis and characterization of fibrous La0.8Sr0.2Fe1-xCuxO3-δ cathode for intermediate-temperature solid oxide fuel cells

Preparation and characterization of La1−xSrxNiyFe1−yO3−δ cathodes for low-temperature solid oxide fuel cells

Improving the Stability of La0.6Sr0.4Co0.2Fe0.8O3-δ Electrode for Solid Oxide Fuel Cells by Introducing Sintering Inhibitors

Co-synthesis of LSCFN-GDC Electrode for Symmetric Solid Oxide Fuel Cell Running on Propane

La0.4sr0.6co0.2fe0.7nb0.1o3-Delta Electrodes for Ysz-Based Symmetrical Sofc

Optimization of Sm0.5sr0.5coo3-Delta-Infiltrated Ysz Electrodes for Solid Oxide Fuel Cell/Electrolysis Cell

Enhanced oxygen reduction reaction of LaSrCoO4–Ce0.9Mn0.1O2 composite cathode for solid oxide fuel cells

Fabrication and Performance of La0.6sr0.4co0.2fe0.8o3-Delta Infiltrated-Yttria-Stabilized Zirconia Cathode on Anode-Supported Solid Oxide Fuel Cell

Preparation and Performance of Strontium-doped Lanthanum Ferrite Powder Used in Solid Oxide Electrolysis Cell Composite Anode

Study on durability of novel core-shell-structured La0.8Sr0.2Co0.2Fe0.8O3-δ@Gd0.2Ce0.8O1.9 composite materials for solid oxide fuel cell cathodes