Microfluidics and Solid-phase Microextraction Effects in SERS Chips for Rapid and Sensitive Malathion Detection

qiuming yu,yan deng

DOI: https://doi.org/10.1364/aio.2014.jtu4a.4

2014-01-01

Abstract:Coupled Microfluidics and SPME effects in PDMS-gold nanostructure SERS chips were modeled and simulated to reveal that high flow rate increases the mass transfer efficiency and uncovered PDMS concentrates malathion molecules around SERS hot spots.

What problem does this paper attempt to address?

Optofluidic Microsystem with Quasi-3 Dimensional Gold Plasmonic Nanostructure Arrays for Online Sensitive and Reproducible SERS Detection.

Yan Deng,Matthew N Idso,Daniel D Galvan,Qiuming Yu

DOI: https://doi.org/10.1016/j.aca.2015.01.015

IF: 6.911

2015-01-01

Analytica Chimica Acta

Abstract:Practical applications of chemical and biological detections through surface-enhanced Raman scattering (SERS) require high reproducibility, sensitivity, and efficiency, along with low-cost, straightforward fabrication. In this work, we integrated a poly-(dimethylsiloxane) (PDMS) chip with quasi-3D gold plasmonic nanostructure arrays (Q3D-PNAs), which serve as SERS-active substrates, into an optofluidic microsystem for online sensitive and reproducible SERS detections. The Q3D-PNA PDMS chip was fabricated through soft lithography to ensure both precision and low-cost fabrication. The optimal dimension of the Q3D-PNA in PDMS was designed using finite-difference time-domain (FDTD) electromagnetic simulations with a simulated enhancement factor (EF) of 1.6×10(6). The real-time monitoring capability of the SERS-based optofluidic microsystem was investigated by kinetic on/off experiments through alternatively flowing Rhodamine 6G (R6G) and ethanol in the microfluidic channel. A switch-off time of ∼2 min at a flow rate of 0.3 mL min(-1) was demonstrated. When applied to the detection of low concentration malathion, the SERS-based optofluidic microsystem with Q3D-PNAs showed high reproducibility, significantly improved efficiency and higher detection sensitivity via increasing the flow rate. The optofluidic microsystem presented in this paper offers a simple and low-cost approach for online, label-free chemical and biological analysis and sensing with high sensitivity, reproducibility, efficiency, and molecular specificity.
Progress of Microfluidics Combined with SERS Technology in the Trace Detection of Harmful Substances

Junjie Chen,Suyang Li,Fuqi Yao,Fubing Bao,Yuqing Ge,Minqiang Zou,Pei Liang,Qiang Chen

DOI: https://doi.org/10.3390/chemosensors10110449

2022-10-28

Chemosensors

Abstract:The combination of microfluidic technology and surface-enhanced Raman spectroscopy (SERS) has the advantages of being label-free, fingerprint spectroscopy, and high sensitivity, which giving the combination great potential for rapid trace-level biological and environmental analysis. In this review, we summarized the recent progress in these two fields, e.g., microfluidics and SERS, including the basic strategies of a simple and versatile microfluidic-SERS detection system and its wide-ranging applications. Moreover, we listed the main challenges and future directions of the microfluidic-SERS systems; proposed on-chip applications beyond SERS; developed a more efficient, more sensitive, and more convenient microfluidic-SERS system; and formed a more complete on-site real-time detection technology.

chemistry, analytical,electrochemistry,instruments & instrumentation
Microfluidic Flow-through SPME Chip for Online Separation and MS Detection of Multiple Analyses in Complex Matrix

Yujun Chen,Tao Gong,Cilong Yu,Xiang Qian,Xiaohao Wang

DOI: https://doi.org/10.3390/mi11020120

IF: 3.4

2020-01-01

Micromachines

Abstract:Simplifying tedious sample preparation procedures to improve analysis efficiency is a major challenge in contemporary analytical chemistry. Solid phase microextraction (SPME), a technology developed for rapid sample pretreatment, has flexibility in design, geometry, and calibration strategies, which makes it a useful tool in a variety of fields, especially environmental and life sciences. Therefore, it is important to study the coupling between the microfluidic electrospray ionization (ESI) chip integrated with the solid phase microextraction (SPME) module and the electrospray mass spectrometer (MS). In our previous work, we designed a solid phase microextraction (SPME) module on a microfluidic chip through geometric design. However, automation and calibration methods for the extraction process remain unresolved in the SPME on-chip domain, which will lead to faster and more accurate results. This paper discusses the necessity to design a micromixer structure that can produce different elution conditions on the microfluidic chip. By calculating the channel resistances, the microfluidic chip’s integrated module with the micromixer, SPME, and ESI emitters optimize the geometry structure. We propose the annular channel for SPME to perform the resistances balance of the entire chip. Finally, for SPME on a single chip, this work provides a quantitation calibration method to describe the distribution of the analytes between the sample and the extraction phase before reaching the adsorption equilibrium.
Extremely Sensitive SERS Sensors Based on a Femtosecond Laser-Fabricated Superhydrophobic/-philic Microporous Platform

Jian Yu,Jiangen Wu,Huan Yang,Pei Li,Jing Liu,Meng Wang,Jihong Pang,Chunbo Li,Can Yang,Kaichen Xu

DOI: https://doi.org/10.1021/acsami.2c10381

IF: 9.5

2022-01-01

ACS Applied Materials & Interfaces

Abstract:The detection of molecules from highly diluted solutions with a limited amount is vital for precancer diagnosis, food safety, and forensic analysis. The sensitivity and convenience of detection techniques are the primary concerns. In this study, a hybrid superhydrophobic/-philic (SH/SHL) microporous platform is designed and fabricated by a femtosecond laser to improve surface-enhanced Raman scattering (SERS) performances. Relying on the micropores fabricated at the center of SHL patterns, sediments distributed at the central regions are avoided, leading to the further enrichment of the target molecules. The engineered micropores with high identification further improve the speed of Raman tests, and the fabricated SERS substrate shows an advantage in outdoor handheld detection and automated inspection applications. The optimized SERS sensor is sufficient for attomolar-level detection (10-17 M) of rhodamine 6G using analyte volumes of just 5 μL, corresponding to an enhancement factor of 5.19 × 1013. Meanwhile, a relative standard deviation of 7.48% at 10-10 M shows the excellent uniformity of this proposed SERS platform. This work further pushes forward the practical applications of SERS technology in ultratrace molecular detections.
On-chip monitoring of toxic gases: capture and label-free SERS detection with plasmonic mesoporous sorbents.

Eduardo Bernad,M. Urbiztondo,F. Almazán,R. Arenal,R. Mallada,M. Pina,M. Lafuente,I. Florea

DOI: https://doi.org/10.1039/d3lc00136a

IF: 7.517

2023-06-20

Lab on a Chip

Abstract:The detection of the spread of toxic gas molecules in the air at low concentration in the field requires a robust miniaturized system combined with an analytical technique that is portable and able to detect and identify the molecules, as is the case with surface enhanced Raman scattering (SERS). This work aims to address capability gaps faced by first responders in real-time detection, identification and monitoring of neurotoxic gases by developing robust, reliable and reusable SERS microfluidic chips. Thus, the key performance attributes of a portable SERS detection system that must be addressed in detail are its limit of detection, response time and reusability. To this purpose, we integrate a 3D plasmonic architecture based on closely packed mesoporous silica (MCM48) nanospheres decorated with Au nanoparticle arrays, denoted as MCM48@Au, into a Si microfluidic chip designed and used for preconcentration and label-free detection of gases at a trace concentration level. The SERS performance of the plasmonic platform is thoroughly analyzed using DMMP as a model neurotoxic simulant over a 1 cm2 SERS active area and over a range of concentrations from 100 ppbV to 2.5 ppmV. The preconcentration-based SERS signal amplification by the mesoporous silica moieties is evaluated against dense silica counterparts, denoted as Stöber@Au. To assess the potential for applications in the field, the microfluidic SERS chip has been interrogated with a portable Raman spectrometer, evaluated with temporal and spatial resolution and subjected to several gas detection/regeneration cycles. The reusable SERS chip shows exceptional performance for the label-free monitoring of 2.5 ppmV gaseous DMMP.

Medicine,Environmental Science,Chemistry
A flexible surface-enhanced Raman Spectroscopy chip integrated with microlens

Feng Yang,Ping Wen,Lianggui Tang,Rongxiu Wang,Yiyan Wang,Dongling Li,Yi Xu,Li Chen

DOI: https://doi.org/10.1016/j.saa.2022.122129

2023-02-15

Abstract:A novel flexible Surface-enhanced Raman Spectroscopy (SERS) chip integrated with microlens was proposed and designed, which consisted of PDMS film, planoconvex microlens, and silver nanoparticles (AgNPs) monolayer, and was of high signal collection efficiency. The flexible PDMS film integrated with microlens was designed by optical simulation, and fabricated by optimized micromachining process. AgNPs monolayer were uniformly assembled on the other side of the PDMS film through a liquid-liquid interface self-assembly method to form SERS chip. The prepared chip revealed excellent SERS performance with a Raman enhancement factor of about 107 and a signal variation of <11.5 %. The SERS chip was successfully utilized for in-situ detection of thiram residues on tomato skins, and its characteristic peaks could still be clearly distinguished when the concentration was down to 2.5 μM. It was shown that the proposed SERS chip was suitable for in-situ detection of a real sample on complex surface morphology and shown potential prospect in the fields of chemical and biomedical detections.
Dynamic SPME–SERS Induced by Electric Field: Toward In Situ Monitoring of Pharmaceuticals and Personal Care Products

Shu Li,Xiaochen Lv,Qing Yang,Shaoying Zhang,Jie Su,Shi-Bo Cheng,Yongchao Lai,Jing Chen,Jinhua Zhan

DOI: https://doi.org/10.1021/acs.analchem.2c00523

IF: 7.4

2022-06-22

Analytical Chemistry

Abstract:The core of the surface-enhanced Raman spectroscopy (SERS)-based techniques for dynamic monitoring is to realize rapid and reversible adsorption. Herein, the integration technology of electro-enhanced adsorption, solid-phase microextraction, and surface-enhanced Raman spectroscopy (EE-SPME-SERS) was developed to obtain sensitive, ultrafast, and reversible SERS response toward in situ monitoring of pharmaceuticals and personal care products (PPCPs). In the EE-SPME-SERS method, a roughened Ag fiber with Au modification (r-Ag/Au fiber) was used as the SERS substrate, SPME sorbent, and working electrode. The r-Ag/Au fiber displayed good SERS sensitivity, ultrahigh photostability, and adsorption properties. The adsorption efficiency of benzidine was 76 times accelerated in EE-SPME-SERS compared to that in static adsorption. The whole process of "sampling and detection" in EE-SPME-SERS can be finished within 1 s. Reversible adsorption and desorption can be achieved in situ by switching the direction of electric field, and the regeneration process takes only a few minutes. Simulated release of benzidine from household wastewater was in situ and dynamically monitored using this strategy. EE-SPME-SERS was proved universal for ionized PPCPs and can detect multicomponents simultaneously. In addition, EE-SPME-SERS showed very good analytical properties. Great potential of EE-SPME-SERS can be expected in environmental monitoring.

chemistry, analytical
All-in-One Electrokinetic Strategy Coupled with a Miniaturized Chip for SERS Detection of Multipesticides

Lu Chen,Rui-Qi Peng,Wei Deng,Jian-An Huang,Dan Li

DOI: https://doi.org/10.1021/acs.analchem.4c00179

IF: 7.4

2024-06-05

Analytical Chemistry

Abstract:Complexed and tiresome pretreatment processes have significantly impeded in-field analysis of environmental specimens. Herein, an all-in-one sample separation and enrichment strategy based on a compact charge-selective capture/nanoconfined enrichment (CSC/NCE) device is exploited for marker-free surface-enhanced Raman spectroscopy (SERS) detection of charged pesticides in matrix specimens. This tactic incorporating in situ separations, seizing, and nanoconfined enhancement can greatly elevate...

chemistry, analytical
Rational design of wettability-patterned microchips for high-performance attomolar surface-enhanced Raman detection

Xue-Song Shi,Yu-Fan Zhao,Hong-Ye Zhang,Xue-Feng Xu

DOI: https://doi.org/10.1016/j.talanta.2023.124417

IF: 6.1

2023-06-01

Talanta

Abstract:Recent progress in wettability-patterned microchips has facilitated the development of ultra-trace detection in multiple biomedical and food safety fields. The existence of a superhydrophilic trap can realize targeted deposition of the analyte. However, the wetting transition from the Cassie-Baxter state to the Wenzel state usually occurs during evaporation and leads to a larger deposition footprint, which has a strong impact on the detection sensitivity and uniformity. In this paper, we report an integrated design, fabrication, and evaporation strategy to avoid the transition for high-performance attomolar surface-enhanced Raman scattering (SERS) detection. An improved force balance model was proposed to design the microstructures of wettability-patterned microchips, which were fabricated by nanosecond laser direct writing and surface fluorination. The microchips were composed of superhydrophobic micro-grooves and superhydrophilic traps, by which the targeted deposition of Au nanoparticles and rhodamine 6G (R6G) onto a minimal area of ∼70 × 70 μm2 was realized after a two-step heated evaporation. Accordingly, the detection limit was down to the attomolar level (5 × 10-18 M) with SERS enhancement factors (EFs) exceeding 1010. More importantly, the Raman signals showed good uniformity (RSD of 11.5%) for the concentration of 2 × 10-17 M. A good linear relationship was obtained in the quantitative concentration range of 10-12 M to 5 × 10-18 M with a high correlation coefficient (R2) of 0.996. These wettability-patterned microchips exhibit high performance (that is, both good sensitivity and good uniformity) in the detection of ultra-trace molecules in aqueous solutions, avoiding the need for expensive equipment and considerable skill in operations. The proposed strategy could also be applied to other microfluidic devices for rapid and simple analyte pre-concentration.
Microfluidic Surface-Enhanced Raman Scattering Sensors for Online Monitoring Trace Chemical Mixing and Reaction

Mao, H.Y.,Lv, P.P.,Wu, W.G.

DOI: https://doi.org/10.1109/transducers.2011.5969273

2011-01-01

Abstract:We report a microfluidic surface-enhanced Raman scattering (SERS) sensor for online monitoring the mixing and reaction between chemicals of low concentration. The SERS sensor is made up of a SERS-active substrate and a polydimethylsiloxane cap with microchannels for delivering solutions. The SERS substrate consists of noble-metal covered silicon nanopillar-forest patterns, which are fabricated based on an oxygen-plasma-treating-on-photoresist technique. Enhancement factor of the device is self-calibrated to be on the order of 5.2×105, by utilizing the flat-metal areas beside the nanopillar-forest patterns as references. The mixing process of Crystal Violet and Rhodamine 6G trace solutions is characterized in the SERS sensor online and in real-time. Other kinetic features, including flow and diffusion, are also revealed.
Micro-macro SERS strategy for highly sensitive paper cartridge with trace-level molecular detection

LangLang Yi,Jie Zhang,Jianduo Wu,Yuan Zhuang,Qin Song,Lei Zhao,Minghui Liang,Guoqian Li,Bo Hu,Pengju Yin,Helene Castel,Alexandre Maciuk,Bruno Figadere

DOI: https://doi.org/10.1016/j.bios.2024.116665

2024-11-15

Abstract:Surface-enhanced Raman Scattering (SERS) has become a powerful spectroscopic technology for highly sensitive detection. However, SERS is still limited in the lab because it either requires complicated preparation or is limited to specific compounds, causing poor applicability for practical applications. Herein, a micro-macro SERS strategy, synergizing polymer-assisted printed process with paper-tip enrichment process, is proposed to fabricate highly sensitive paper cartridges for sensitive practical applications. The polymer-assisted printed process finely aggregates nanoparticles with a discrete degree of 1.77, and SERS results are matched with theoretical enhancement, indicating small cluster-dominated hotspots at the micro-scale and thus 41-fold SERS increase compared to other aggregation methods. The paper-tip enrichment process moves molecules in a fluid into small tips filled with plasmonic clusters, and molecular localization at hotspots is achieved by the simulation and optimization of fluidic velocity at the macro-scale, generating a 39.5-fold SERS sensibility increase in comparison with other flow methods. A highly sensitive paper cartridge contains a paper-tip and a 3D-printed cartridge, which is simple, easy-to-operate, and costs around 2 US dollars. With a detection limit of 10 -12 M for probe molecules, the application of real samples and multiple analytes achieves single-molecule level sensitivity and reliable repeatability with a 30-min standardized procedure. The micro-macro SERS strategy demonstrates its potential in practical applications that require point-of-care detection.
Centrifuge tube-based SERS Sensor on Heterogenous Dimers of Plasmonic Coupling as a Microreactor for Ultrasensitive SERS Sensing Pesticide Residues in Environmental Water

Ton Nu Quynh Trang,Nguyen Tran Gia Bao,Lam Quang Vinh,Vu Thi Hanh Thu

DOI: https://doi.org/10.1016/j.sna.2024.115173

IF: 4.291

2024-02-18

Sensors and Actuators A Physical

Abstract:In situ fast detection of contaminants in solution is the most mature commercial SERS detection protocol and serves as an effective workflow solution for protecting the public from unexpected exposure to harmful pollutants. However, it is frequently hindered by weakly adsorbed species, trace content, and complicated organic compounds. Surface-enhanced Raman spectroscopy (SERS) nanoprobes, constructed through a simple and cost-effective fabrication method, are widely employed in sensing trace substances across various research fields. They excel in providing fingerprinting identification of individual molecules, making them a valuable tool for the detection and quantification of harmful components. Herein, we introduce a novel centrifuge tube-based SERS chip designed as an analytical tool for achieving field-deployable solution detection. This chip is created through a consecutive process involving the unique assembly of heterogeneous plasmonic materials. We achieve this by the co-coupling of Au nanospheres (NSs) and Ag nanocubes (NCs) to form AgNCs/AuNSs films based on a centrifugation process. This approach offers remarkable advantages, including simplicity of operation, straightforward integration, and mass production capabilities. Concurrently, the co-assembly of AgNCs and AuNSs efficiently generates plasmonic metasurfaces and reduces interparticle distance inside the centrifuge tube, ensuring ultrasensitive and reproducible SERS measurements. The optimized SERS sensor demonstrates ultrahigh sensitivity at trace concentrations of 10 -10 M, a high enhancement factor (EF) of 4.69×10 8 , and strong reproducibility with a relative standard deviation (RSD) of approximately 7.5% at 10 -6 M. To assess its practical feasibility, experimental results show that the sensor can directly identify thiram pesticide residues at a low concentration of 10 -8 M with an EF of 1.38 × 10 7 . This proposed sensor not only offers a sensitive, portable, and cost-effective tube-based SERS platform but also has the potential to serve as a versatile SERS sensor for field-deployable identification in ultra-trace molecular detection in solution.

engineering, electrical & electronic,instruments & instrumentation
Free-surface microfluidic control of surface-enhanced Raman spectroscopy for the optimized detection of airborne molecules

Brian D. Piorek,Seung Joon Lee,Juan G. Santiago,Martin Moskovits,Sanjoy Banerjee,Carl D. Meinhart

DOI: https://doi.org/10.1073/pnas.0708596104

IF: 11.1

2007-11-27

Proceedings of the National Academy of Sciences

Abstract:We present a microfluidic technique for sensitive, real-time, optimized detection of airborne water-soluble molecules by surface-enhanced Raman spectroscopy (SERS). The method is based on a free-surface fluidic device in which a pressure-driven liquid microchannel flow is constrained by surface tension. A colloidal suspension of silver nanoparticles flowing through the microchannel that is open to the atmosphere absorbs gas-phase 4-aminobenzenethiol (4-ABT) from the surrounding environment. As surface ions adsorbed on the colloid nanoparticles are substituted by 4-ABT, the colloid aggregates, forming SERS “hot spots” whose concentrations vary predictably along the microchannel flow. 4-ABT confined in these hot spots produces SERS spectra of very great intensity. An aggregation model is used to account quantitatively for the extent of colloid aggregation as determined from the variation of the SERS intensity measured as a function of the streamwise position along the microchannel, which also corresponds to nanoparticle exposure time. This allows us to monitor simultaneously the nanoparticle aggregation process and to determine the location at which the SERS signal is optimized.

multidisciplinary sciences
An ordered array of hierarchical spheres for surface-enhanced Raman scattering detection of traces of pesticide

Xiaoye Hu,Peng Zheng,Guowen Meng,Qing Huang,Chuhong Zhu,Fangming Han,Zhulin Huang,Zhongbo Li,Zhaoming Wang,Nianqiang Wu

DOI: https://doi.org/10.1088/0957-4484/27/38/384001

IF: 3.5

2016-08-16

Nanotechnology

Abstract:An ordered array of hierarchically-structured core-nanosphere@space-layer@shell-nanoparticles has been fabricated for surface-enhanced Raman scattering (SERS) detection. To fabricate this hierarchically-structured chip, a long-range ordered array of Au/Ag-nanospheres is first patterned in the nano-bowls on the planar surface of ordered nanoporous anodic titanium oxide template. A ultra-thin alumina middle space-layer is then conformally coated on the Au/Ag-nanospheres, and Ag-nanoparticles are finally deposited on the surface of the alumina space-layer to form an ordered array of Au/Ag-nanosphere@Al2O3-layer@Ag-nanoparticles. Finite-difference time-domain simulation shows that SERS hot spots are created between the neighboring Ag-nanoparticles. The ordered array of hierarchical nanostructures is used as the SERS-substrate for a trial detection of methyl parathion (a pesticide) in water and a limit of detection of 1 nM is reached, indicating its promising potential in rapid monitoring of organic pollutants in aquatic environment.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology
Microsphere Lens Array Embedded Microfluidic Chip for SERS Detection with Simultaneous Enhancement of Sensitivity and Stability

Zhenyong Dong,Xiaoxian Liu,Song Zhou,Yifan Zhu,Jin Chen,Yukai Liu,Xiao Ren,Yan-qing Lu,Rui Xiao,Guanghui Wang

DOI: https://doi.org/10.1016/j.bios.2024.116505

IF: 12.545

2024-06-17

Biosensors and Bioelectronics

Abstract:Surface enhanced Raman spectroscopy (SERS) utilizes the fingerprint features of molecular vibrations to identify and detect substances. However, in traditional single focus excitation scenarios, its signal collection efficiency of the objective is restricted. Furthermore, the uneven distribution of samples on the SERS substrate would result in poor signal stability, while the excitation power is limited to avoid sample damage. SERS detection system always requires precise adjustment of focal length and spot size, making it difficult for point-of-care testing applications. Here, we proposed a SERS microfluidic chip with barium titanate microspheres array (BTMA) embedded using vacuum self-assembled hot-pressing method for SERS detection with simultaneous enhancement of sensitivity and stability. Due to photonic nano-jets and directional antenna effects, high index microspheres are perfect micro-lens for effective light focusing and signal collecting. The BTMA can not only disperse excitation beam into an array of focal points covering the target uniformly with very low signal fluctuation, but enlarge the power threshold for higher signal intensity. We conducted a proof-of-principle experiment on chip for the detection of bacteria with immuno-magnetic tags and immuno-SERS tags. Together with magnetic and ultrasonic operations, the target bacteria in the flow were evenly congregated on the focal plane of BTMA. It demonstrated a limit of detection of 5 cells/mL, excellent signal reproducibility (error∼4.84%), and excellent position tolerance of 500 μm in X–Y plane (error∼5.375%). It can be seen that BTMA-SERS microfluidic chip can effectively solve the contradiction between sensitivity and stability in SERS detection.

electrochemistry,biotechnology & applied microbiology,nanoscience & nanotechnology,biophysics,chemistry, analytical
Preparation of the Capillary-based Microchips for Solid Phase Extraction by Using the Monolithic Frits Prepared by UV-initiated Polymerization

Xiaochuan Wang,Xiuhan Yang,Xiangmin Zhang

DOI: https://doi.org/10.2116/analsci.22.1099

IF: 1.967

2022-01-01

Analytical Sciences

Abstract:A microfluidic solid phase extraction (SPE) array for sample enrichment was prepared by a simple method, a hot embossing technique. Five fused-silica capillaries (250 |xm i.d., 380 |xm o.d.) were partly embedded parallel in a polymethyl methacrylate (PMMA) microchip to serve as the extraction channels. Within each of the channels, a 2-mm- long monolithic porous polymer was prepared by in-situ photoinitiated polymerization. This then acted as the frit for packing of the extraction materials (octadecylsilica beads, ODS). By defining the light-exposure window on the channels, one can easily control the length and location of the polymer frits and the ODS beads can be packed at the desired location. With this method, solid phase extraction channels for microfluidic use can be easily prepared without complex fabrication of microstructures. Several SPE channels can be conveniently made in one microchip since the frits can be prepared in different channels through one polymerization; packing of the different channels can also be performed simultaneously. With the use of dilute ephedrine solutions, the sample loading capacity, linearity, and reproducibility were characterized. Coupled with the fast capillary electrophoresis separation, this microchip SPE array was applied for the detection of ephedrines in human urine.
Microsphere-enhanced Raman Spectroscopy Applied to Microfluidic Detection Technology

Yifan Zhu,Song Zhou,Haonan Ding,Xiaoxian Liu,Guanghui Wang

DOI: https://doi.org/10.1109/acp55869.2022.10088912

2022-01-01

Abstract:We have proposed an enhanced Raman detection device based on microfluidic chip with arrays of microsphere. In this method, the working distance of detection can be increased greatly and the system of detection can be more stable. The enhancement effect is nearly stationary and the Raman scattering signal will increase by 6 times at different distances from 10 mm to 50 mm and different angles from 0° to 30°. When there is a transparent partition on the microfluidic chip, the signal can still get near 6 times enhancement. In addition, we have verified the detection accuracy and reusability of our design in mixture analysis.
Femtosecond Laser-induced Nanoparticle Implantation into Flexible Substrate for Sensitive and Reusable Microfluidics SERS Detection

Yongxiang Hu,Yu Zhou,Guohu Luo,Dege Li,Minni Qu

DOI: https://doi.org/10.1088/2631-7990/ad48e9

2024-05-10

International Journal of Extreme Manufacturing

Abstract:Surface-enhanced Raman spectroscopy (SERS) microfluidic system, which enables rapid detection of chemical and biological analytes, offers an effective platform to monitor various food contaminants and disease diagnoses. The efficacy of SERS microfluidic systems is greatly dependent on the sensitivity and reusability of SERS detection substrates to ensure repeated use for prolonged periods. This study proposed a novel process of femtosecond laser nanoparticle array (NPA) implantation to achieve homogeneous forward transfer of gold NPA on a flexible polymer film and accurately integrated it within microfluidic chips for SERS detection. The implanted Au-NPA strips show a remarkable electromagnetic field enhancement with the factor of 9×10 8 during SERS detection of malachite green (MG) solution, achieving a detection limit lower than 10 ppt, far better than most laser-prepared SERS substrates. Furthermore, Au-NPA strips show excellent reusability after several physical and chemical cleaning, because of the robust embedment of laser-implanted NPA in flexible substrates. To demonstrate the performance of Au-NPA, a SERS microfluidic system is built to monitor the online oxidation reaction between MG/NaClO reactants, which helps infer the reaction path. The proposed method of nanoparticle implantation is more effective than the direct laser structuring technique. It provides better performance for SERS detection, robustness of detection, and substrate flexibility and has a wider range of applications for microfluidic systems without any negative impact.

engineering, manufacturing,materials science, multidisciplinary
Silver coated PS microsphere array SERS microfluidic chip for pesticide detection

Wang Peng,Zhihan Xu,Chao Yi,Yuankai Zhang,Qingxi Liao

DOI: https://doi.org/10.1016/j.heliyon.2024.e33647

IF: 3.776

2024-06-26

Heliyon

Abstract:Carbendazim and acetamidine are pesticides that widely used to control pests and diseases in oilseed rape. In this paper, a rapid, accurate and reliable method was proposed for the detection of carbendazim and acetamidine with SERS microfluidic chip technology. Ag-ps(Polystyrene microspheres) microsphere SERS substrate was prepared by spin coating and magnetron sputtering deposition of Ag. The enhancement factor of prepared SERS substrate was 2.4 × 1010. The SERS detection working curves were well fitted and the linear parameters R2 were 0.987 and 0.994, respectively. The limit of detection was 0.01 mg/mL. The use of SERS microfluidic chip to detect carbendazim and acetamidine is expected to provide a way for the detection of pesticide residues in crops, which has broad application prospects in the field of food safety.
Localized Flexible Integration of High-Efficiency Surface Enhanced Raman Scattering (SERS) Monitors into Microfluidic Channels.

Bin-Bin Xu,Zhuo-Chen Ma,Lei Wang,Ran Zhang,Li-Gang Niu,Zhe Yang,Yong-Lai Zhang,Wan-Hua Zheng,Bing Zhao,Ying Xu,Qi-Dai Chen,Hong Xia,Hong-Bo Sun

DOI: https://doi.org/10.1039/c1lc20397e

IF: 7.517

2011-01-01

Lab on a Chip

Abstract:We report here a facile approach for flexible integration of high efficiency surface enhanced Raman scattering (SERS) monitors in a continuous microfluidic channel. In our work, femtosecond laser direct writing was adopted for highly localizable and controllable fabrication of the SERS monitor through a multi-photon absorption (MPA) induced photoreduction of silver salt solution. The silver substrate could be shaped into designed patterns, and could be precisely located at the desired position of the microchannel bed, giving the feasibility for real-time detection during reactions. SEM and TEM images show that the silver substrates were composed of crystallized silver nanoplates with an average thickness of 50 nm. AFM results reveal that the substrates were about 600 nm in height and the surface was very rough. As representative tests for SERS detection, p-aminothiophenol (p-ATP) and flavin adenine dinucleotide (FAD) were chosen as probing molecules for microfluidic analysis at visible light (514.5 nm) excitation, exhibiting an enhancement factor of ~10(8). In addition, the combination of the SERS substrate with the microfluidic channel allows detection of inactive analytes through in situ microfluidic reactions.

Microfluidics and Solid-phase Microextraction Effects in SERS Chips for Rapid and Sensitive Malathion Detection

Optofluidic Microsystem with Quasi-3 Dimensional Gold Plasmonic Nanostructure Arrays for Online Sensitive and Reproducible SERS Detection.

Progress of Microfluidics Combined with SERS Technology in the Trace Detection of Harmful Substances

Microfluidic Flow-through SPME Chip for Online Separation and MS Detection of Multiple Analyses in Complex Matrix

Extremely Sensitive SERS Sensors Based on a Femtosecond Laser-Fabricated Superhydrophobic/-philic Microporous Platform

On-chip monitoring of toxic gases: capture and label-free SERS detection with plasmonic mesoporous sorbents.

A flexible surface-enhanced Raman Spectroscopy chip integrated with microlens

Dynamic SPME–SERS Induced by Electric Field: Toward In Situ Monitoring of Pharmaceuticals and Personal Care Products

All-in-One Electrokinetic Strategy Coupled with a Miniaturized Chip for SERS Detection of Multipesticides

Rational design of wettability-patterned microchips for high-performance attomolar surface-enhanced Raman detection

Microfluidic Surface-Enhanced Raman Scattering Sensors for Online Monitoring Trace Chemical Mixing and Reaction

Micro-macro SERS strategy for highly sensitive paper cartridge with trace-level molecular detection

Centrifuge tube-based SERS Sensor on Heterogenous Dimers of Plasmonic Coupling as a Microreactor for Ultrasensitive SERS Sensing Pesticide Residues in Environmental Water

Free-surface microfluidic control of surface-enhanced Raman spectroscopy for the optimized detection of airborne molecules

An ordered array of hierarchical spheres for surface-enhanced Raman scattering detection of traces of pesticide

Microsphere Lens Array Embedded Microfluidic Chip for SERS Detection with Simultaneous Enhancement of Sensitivity and Stability

Preparation of the Capillary-based Microchips for Solid Phase Extraction by Using the Monolithic Frits Prepared by UV-initiated Polymerization

Microsphere-enhanced Raman Spectroscopy Applied to Microfluidic Detection Technology

Femtosecond Laser-induced Nanoparticle Implantation into Flexible Substrate for Sensitive and Reusable Microfluidics SERS Detection

Silver coated PS microsphere array SERS microfluidic chip for pesticide detection

Localized Flexible Integration of High-Efficiency Surface Enhanced Raman Scattering (SERS) Monitors into Microfluidic Channels.