Abstract:Next generation lithium-ion batteries (LIB) with high energy density and high power density have recently become of great interest for electric vehicle and portable devices. With the further upgrade of especially electric vehicles, the next generation LIB with high power and high energy density is urgently required. For this purpose, composite electrode consisting of commercially available graphite active material mixed with silicon nanoparticles is under current development. The main objectives are a significant increase of the practical capacity and energy density of commercial anodes, an overcome of the drawbacks of pure silicon due to large volume changes during electrochemical cycling, and the development of a technology suitable for mass production. In order to reduce the intrinsic mechanical stress of silicon/graphite electrodes and to improve the lithium-ion transport kinetic, free-standing electrode structures were generated by applying ultrafast industrial capable laser material processing. This advanced laser technology is demonstrated to be a flexible and powerful tool for pushing silicon/graphite (Si/C) composite anode materials beyond state of the art electrodes towards application. The electrochemical properties of cells with unstructured and structured electrodes were systematically analyzed by means of cyclic voltammetry, galvanostatic measurements, and electrochemical impedance spectroscopy. The increased active surface enables a significant improvement of lithium-ion diffusion kinetics. Furthermore, it is expected that the increased active surface will also provide additional artificial porosity for active material expansion, which in turn will reduce the mechanical stress within the electrodes during lithiation or delithiation. In this context, in-situ scanning electron microscopy (SEM) was performed in order to analyze the active material volume changes during charging and discharging. A main engineering challenge was to optimize the electrode architecture such as the pitch distance of free-standing structures regarding an enhanced electrochemical performance and a reduced material loss. Furthermore, an alumina (Al2O3) layer with a thickness of 5 nm, which acts as an artificial SEI, was coated on structured silicon/graphite electrodes by applying Atomic Layer Deposition (ALD). Cyclic voltammetry measurements were subsequently performed in order to investigate the fundamental properties of cells with structured and Al2O3- coated silicon/graphite electrodes. Galvanostatic measurements reveal that the cells with structured electrodes exhibit excellent electrochemical properties, i.e., a significantly improved capacity retention. ALD layers can contribute to further improvement of cycle stability and cell lifetime. In addition, advanced full cells with Lithium Nickel Manganese Cobalt Oxide NMC622 as cathode and Si/C as counter electrode were assembled and the electrochemical data will be presented.

High‐Areal‐Capacity Silicon Electrodes with Low‐Cost Silicon Particles Based on Spatial Control of Self‐Healing Binder

Synthesis of Porous Si/SiO2 /C Particles as Anode Materials of Lithium-Ion Batteries

A Robust Network Binder Via Localized Linking by Small Molecules for High-Areal-capacity Silicon Anodes in Lithium-Ion Batteries

Large-scale Fabrication, 3D Tomography, and Lithium-Ion Battery Application of Porous Silicon.

Inorganic/organic Composite Binder with Self-Healing Property for Silicon Anode in Lithium-Ion Battery

Establishing a Resilient Conductive Binding Network for Si-Based Anodes via Molecular Engineering

(Invited) Manufacturing and Characterization of Advanced High Energy Silicon/Graphite Electrodes

Advanced Inorganic Lithium Metasilicate Binder for High-Performance Silicon Anode.

Carbon‐Binder Design for Robust Electrode–Electrolyte Interfaces to Enable High‐Performance Microsized‐Silicon Anode for Batteries (Adv. Energy Mater. 40/2023)

A Conductive Self-Healing Hydrogel Binder for High-Performance Silicon Anodes in Lithium-Ion Batteries

A Highly Stretchable Cross‐Linked Polyacrylamide Hydrogel As an Effective Binder for Silicon and Sulfur Electrodes Toward Durable Lithium‐Ion Storage

Lithium-Ion Batteries: Interweaving 3D Network Binder for High-Areal-Capacity Si Anode through Combined Hard and Soft Polymers (Adv. Energy Mater. 3/2019)

A Stress Self-Adaptive Silicon/Carbon "Ordered Structures" to Suppress the Electro-Chemo-Mechanical Failure: Piezo-Electrochemistry and Piezo-Ionic Dynamics

Mixed Electronic-Ionic Conductive Polymer Binder for Silicon-Based Solid-State Battery

A New Universal Aqueous Conductive Binder via Esterification Reinforced Electrostatic/H-bonded Self-assembly for High Areal Capacity and Stable Lithium-Ion Batteries

Scalable Synthesis of Si/C Microspheres with 3D Conducting Nanosized Porous Channels as High-Performance Anodes in LIBs

Development of Silicon-Based Anode for Lithium-Ion Batteries and Its Application in Solid-State Electrolytes

An in situ thermal cross-linking binder for silicon-based lithium ion battery

Modeling of contact stress among compound particles in high energy lithium-ion battery

Lawrence Berkeley National Laboratory Recent Work Title Molecular spring enabled high-performance anode for lithium ion batteries

Superionic Conductor Films for Solid-State Li-Ion Batteries