Abstract:Moisture damage is a main factor degrading the bonding performance between asphalt binder and aggregate, playing adverse effects on the integrity of pavements, and thus reducing their serviceability substantially. The asphalt pavement is susceptible to moisture damage, exhibiting weakened durability and accelerated distress in many other formations with lower service life. In this study, moisture damage was reflected in the immersion method of Marshall test, and the deterioration potential of moisture damage on the fracture behaviors of asphalt mixture was investigated through multi-scale analysis. Pull-off tests were carried out to characterize the bonding performance between asphalt binder and aggregate considering the influence of moisture erosion, and the adhesion and cohesion results were adopted as the key mechanical parameters for the subsequent numerical analysis. Semi-circular bending (SCB) tests were conducted for the specimens with or without water immersion conditioning, and the fracture parameters, including the critical strain energy release rate (J-integral), Flexibility Index (FI), Crack Resistance Index (CRI), and Balanced Cracking Index (BCI), were obtained to provide insights into the fracture performance of the asphalt mixture. Furthermore, the mechanism of moisture affecting the fracture behavior of asphalt mixtures in meso-scale was explored through numerical analysis based on finite element modeling (FEM). A virtual SCB specimen integrated with two cohesive zone models (CZM) describing the failure of asphalt mortar and the loss of adhesion between asphalt binder and aggregate was established. The results from pull-off tests indicated that water immersion could enlarge the adhesive failure area and subsequently decrease the bonding strength between binder and aggregate. However, moisture damage had a limited effect on cohesive failure performance. Results from SCB tests showed that immersion could significantly increase the moisture damage potential and the crack development speed, weaken the fracture resistance, and reduce the flexibility of the asphalt mixture. The numerical analysis method proposed in the study was effective to interpret the effect of moisture damage on the fracture behaviors of the asphalt mixture. It was found that moisture damage led to more pronounced internal damage, and more failures at the interface of binder-aggregate were observed due to the deterioration effect of moisture erosion on the adhesion. According to the fracture development under dry and wet conditioning, the asphalt mixture would crack earlier after encountering moisture damage. The research method combining laboratory tests and numerical simulations demonstrated more comprehensively the impact of moisture damage on the fracture performance of asphalt mixture from a macro to meso perspective.

Laboratory Evaluation of Effects of Soaked Duration on Moisture Susceptibility of Warm Mix Asphalt Mix

Quantitative Evaluation on the Energy Saving and Emission Reduction Characteristics of Warm Mix Asphalt Mixtures

Experimental investigation on the effects of a new anti-stripping additive on performance properties of asphalt and its mixtures

A Laboratory Study of Warm Mix Asphalt for Moisture Damage Potential Using Surface Free Energy Method

Laboratory investigation on warm mix asphalt incorporating organo-silane additive

Evaluation of the effect of moisture on behavior of warm mix asphalt (WMA) mixtures containing recycled asphalt pavement (RAP)

Long-Term Field Rutting and Moisture Susceptibility Performance of Warm-Mix Asphalt Pavement

Use of Multi-Scale Investigation to Evaluate Adhesion Performance of Warm-Mix Polymer-Modified Asphalt

Performance evaluation of asphalt mixtures containing warm mix asphalt (WMA) additives and reclaimed asphalt pavement (RAP)

Performance Evaluation of Warm Mix Asphalt Containing Reclaimed Asphalt Mixtures

Laboratory Performance of Warm Mix Asphalt Containing Recycled Asphalt Mixtures

Investigation of aggregate moisture content variation and its impact on pavement performance of WMA

Workability and Mechanical Property Characterization of Asphalt Rubber Mixtures Modified with Various Warm Mix Asphalt Additives

Experimental Study on the Physicochemical Properties of Asphalt Modified by Different Anti-Stripping Agents and Their Moisture Susceptibility with Aggregates

Estimation and Evaluation of Water Damage Resistance of Warm-Stone Matrix Asphalt Mixture with Compound Polymer Modifiers Using Regression Tree Ensemble Method

Experimental Investigation of Moisture Sensitivity and Damage Evolution of Porous Asphalt Mixtures

Research on the Mechanism of Surfactant Warm Mix Asphalt Additive-Based on Molecular Dynamics Simulation

Influence of warm-mix asphalt technology and rejuvenator on performance of asphalt mixtures containing 50% reclaimed asphalt pavement

Effect of Warm Mix Asphalt (WMA) Antistripping Agent on Performance of Waste Engine Oil-Rejuvenated Asphalt Binders and Mixtures

Multi-scale Analysis on Fracture Behaviors of Asphalt Mixture Considering Moisture Damage

Effect of Testing Conditions on Laboratory Moisture Test for Asphalt Mixtures