Polymeric Nanocapsules by Interfacial Miniemulsion Polymerization

Guo‐Rong Shan,Zhi‐Hai Cao

DOI: https://doi.org/10.1002/9780470922354.ch5

2010-01-01

Abstract:This chapter contains sections titled: Introduction Organic Nanocapsules by Interfacial Miniemulsion Polymerization Organic-Inorganic Hybrid Nanocapsules by Interfacial Miniemulsion Polymerization Conclusions

What problem does this paper attempt to address?

Techniques of synthesizing polymeric (hollow) sub-micro/nanocapsules

Sun Zhijuan,Lu Fujun,Luo Yingwu

DOI: https://doi.org/10.3969/j.issn.2095-2783.2011.06.002

2011-01-01

Abstract:Polymeric(hollow) sub-micro/nanocapsule is a kind of composite particle with special morphology,which synthesis techniques has become one of the research hotspots in the field of nanometer science.The approaches of self-assembly,template,dendrimer and miniemulsion polymerization and their recent developments are described in detail,as well as the prospects,advantages and disadvantages of each approach.Moreover,the approach of miniemulsion polymerization has big potentials and wide prospect for the industrialization of polymeric(hollow) sub-micro/nanocapsules as its simple,environment-friendly and efficient preparation technique.Especially,the interfacially confined reversible addition fragmentation transfer(RAFT) miniemulsion polymerization combines the living polymerization of RAFT polymerization with the droplet nucleation mechanism of miniemulsion polymerization,the structure(size,morphology and thickness of shell) and compose(polymeric shell and functional group) of the polymeric(hollow) sub-micro/nanocapsules sub-micro/nanocapsule can be exactly tuned by the RAFT miniemulsion polymerization,and the polymeric nano-shell with much higher crosslinking degree can be fabricated.
Nanoencapsulation of A Hydrophobic Compound by A Miniemulsion Polymerization Process

YW Luo,XD Zhou

DOI: https://doi.org/10.1002/pola.20065

2004-01-01

Abstract:The nanoencapsulation of hydrophobic compounds by miniemulsion polymerization, a convenient one-step encapsulation technique for nanocapsules, was investigated in terms of the thermodynamics and kinetics. The encapsulation was achieved by polymerization inducing phase separation within minidroplets dispersed in an aqueous phase. Thermodynamic factors (the level and type of surfactant, the level of the hydrophilic comonomer, and the monomer/paraffin ratio), kinetic factors (the level of the crosslinking agent or chain-transfer agent), and nucleation modes were all found to have a great influence on the latex morphology. Specifically, for a styrene/paraffin system, there were optimum levels of sodium dodecyl sulfate (1.0 wt %), the hydrophilic comonomer (1.0 wt % methyl acrylate acid), and the chain-transfer agent (0.2 wt % n-dodecanethiol) for obtaining well-defined nanocapsules of paraffin with a styrene/paraffin ratio of 1:1. When the styrene/paraffin ratio was reduced, however, it was more difficult to achieve a fully encapsulated particle morphology. Homogeneous nucleation could compete with encapsulation, and this resulted in a pure polymer particle and a half-moon morphology. Conditions were also found under which complete encapsulation could be observed with a water-soluble initiator (potassium persulfate), contrary to certain reports. Replacing potassium persulfate with an oil-soluble initiator (2,2-azo-bisisobutyronitrile) had little influence on the morphology under those conditions. (C) 2004 Wiley Periodicals, Inc.
Facile synthesis of nanocapsules and hollow nanoparticles consisting of fluorinated polymer shells by interfacial RAFT miniemulsion polymerization

Hao Chen,Yingwu Luo

DOI: https://doi.org/10.1002/macp.201000664

IF: 2.996

2011-01-01

Macromolecular Chemistry and Physics

Abstract:Nanocapsules made of a cross-linked poly(dodecafluoroheptyl acrylate) shell were successfully synthesized by interfacial RAFT miniemulsion polymerization. The well-defined hollow fluorinated polymer structures were obtained by the subsequent removal of the liquid core materials. The core/shell ratio could be easily tuned up to 1:1 by changing the conditions. In the cases of high core/shell ratio of 1:2 and 1:1, the nanocapsules were severely deformed, which was improved by increasing the cross-linker amount up to 30 wt.-%. It was concluded that the utility of the interfacial RAFT miniemulsion polymerization overcame the thermodynamic and kinetic barriers in a conventional miniemulsion polymerization.
Synthesis of Polymeric Nanocapsules with a Crosslinked Shell Through Interfacial Miniemulsion Polymerization

Zhihai Cao,Guorong Shan

DOI: https://doi.org/10.1002/pola.23255

2009-01-01

Journal of Polymer Science Part A Polymer Chemistry

Abstract:AbstractA water‐soluble comonomer, N‐isopropylacrylamide (NIPAM), and an oil‐soluble crosslinker, divinylbenzene (DVB), have been combined in a system for the synthesis of nanocapsules with crosslinked shells through interfacial miniemulsion polymerization by encapsulating a liquid nonsolvating hydrocarbon. Oligomers of poly(N‐isopropylacrylamide) (PNIPAM) were dehydrated and separated from the aqueous phase and were adsorbed by the nanodroplets or latex particles and then anchored at their interfaces by means of a crosslinking reaction. Nanocapsules were then formed through encapsulation of the hydrocarbon by the newly produced polymers at the interfaces of the droplets. The crosslinked structure gradually grew to stabilize the shell morphology. The incorporation of NIPAM into the shell copolymers has been verified by FTIR and solid‐state 13C NMR data. The fact that the number of nanocapsules increases with increasing amounts of DVB and NIPAM supports the formation of nanocapsules following interfacial (co)polymerization. Therefore, a mechanism for the formation of nanocapsules through interfacial (co)polymerization induced by NIPAM and DVB is proposed. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1522–1534, 2009
Synthesis of Organic-inorganic Hybrid Nanocapsules by Using Low Molecular Weight Droplets as Template

Ke-Fan NI,Guo-rong SHAN,Zhi-Xue WENG

DOI: https://doi.org/10.3321/j.issn:0251-0790.2005.05.025

2005-01-01

Abstract:A novel nanocapsules were synthesized by miniemulsion polymerization the using low molecular weight droplets as the template. Styrene and 3-trimethoxysilyl propyl methacrylate(MPS), which contain vinyl and Si-OR groups, are copolymerized on the surface of the well dispersed isooctane droplets to form capsules. With the free radical copolymerization, the Si-OR groups can be hydrolyzed and condensed into Si-O-Si inorganic network. The diameter of the capsules is about 98 nm and the void fraction is about 70%. The morphology of the capsules was characterized by transmission electron microscopy, and the microstructures of the capsules were characterized by infrared spectrometry. The effects of the polymerization methods and monomer volume fraction on the morphology were discussed. It is found that the initial volume fraction of the monomer in the recipe must be lower than 36% to obtain capsules, and higher MPS volume fraction is favor in the formation of capsules, but a higher MPS content in capsules will lead to collapse. Finally, the mechanism of this synthetic process was interpreted by thermodynamic and kinetic analysis.
A Facile Route to Synthesize Highly Uniform Nanocapsules: Use of Amphiphilic Poly(acrylic Acid)‐block‐polystyrene RAFT Agents to Interfacially Confine Miniemulsion Polymerization

Fujun Lu,Yingwu Luo,Bogeng Li

DOI: https://doi.org/10.1002/marc.200600823

IF: 5.006

2007-01-01

Macromolecular Rapid Communications

Abstract:Miniemulsion polymerization with an amphiphilic poly(acrylic acid)- block-polystyrene reversible addition-fragmentation chain transfer agent as a surfactant and polymerization mediator is used to synthesize highly uniform nanocapsules. The nanocapsules with uniform structures, which include particle size, shell thickness, and shape symmetry, could be achieved by the post-addition of a small amount of sodium dodecyl sulfate. Although the solid particles seem unavoidable, the 'pure' uniform core-shell structures are easily collected by centrifugation.
A General Strategy for Nano‐Encapsulation Via Interfacially Confined Living/Controlled Radical Miniemulsion Polymerization

Yw Luo,Hy Gu

DOI: https://doi.org/10.1002/marc.200500649

IF: 5.006

2006-01-01

Macromolecular Rapid Communications

Abstract:We propose and demonstrate the utility of an interfacial living/controlled (reversible addition fragmentation chain transfer, RAFT) radical miniemulsion polymerization in nano-encapsulation. The principles and methodology behind this technique are readily scalable and highly efficient. The living/controlled nature of the system offers great opportunities to tune the properties of the polymer shell-like thickness, surface functionality, molecular weight, and inner-wall functionality by simply using a semicontinuous polymerization technique.
Miniemulsion Polymerization as a Means to Encapsulate Organic and Inorganic Materials

Clemens K. Weiss,Katharina Landfester

DOI: https://doi.org/10.1007/12_2010_61

2010-01-01

Abstract:The miniemulsion technique greatly enhances the possibilities for the preparation of hybrid nanomaterials by encapsulating molecular compounds, liquids, or solid material. Using this technique, a wide variety of novel functional nanocomposites can be generated that are not accessible with other techniques. After briefly introducing miniemulsions and the miniemulsion polymerization techniques for the preparation of polymeric nanoparticles, this review focuses on the preparation of functional nanostructures by encapsulation of organic or inorganic material in polymeric matrices. The examples presented highlight the possibility to either protect the encapsulated material (e.g., dyes, drugs, magnetite, or DNA) and create completely new properties that emerge in a synergistic manner from the components of the nanocomposites, or to perform reactions in polymer-enclosed vessels of submicrometer size.
Ph Effects on the Synthesis of Nanocapsules Via Interfacial Miniemulsion Polymerization Mediated by Amphiphilic Raft Agent with the R Group of Poly(Methyl Acrylic Acid-Ran-Styrene)

Fujun Lu,Yingwu Luo,Bogeng Li

DOI: https://doi.org/10.1021/ie901515t

2010-01-01

Industrial & Engineering Chemistry Research

Abstract:Interfacial radical miniemulsion polymerization was constructed to be general process for nanoencapsulation and the preparation of nanocapsules by using an amphiphilic reversible addition - fragmentation transfer (RAFT) agent with the R group of poly(methyl acrylic acid-co-styrene) as a reactive surfactant. Styrene and n-nonadecane were used as a model of monomer and core materials, respectively. It was found that the fragmental R radicals, which exited out of the droplets into the water phase, could trigger the homogeneous nucleation. When the homogeneous nucleation rather than the monomer droplet nucleation became the dominant mechanism of the particle formation, a large fraction of solid particles would be coformed with the nanocapsules. By decreasing pH values, we could decrease the hydrophilicity of R radicals and thus suppress the formation of the solid particles from the homogeneous nucleation. For the current model system, when values were decreased from pH 8.12 to 6.45, the fraction of nanocapsules linearly increased from 18 to 94%. In the middle pH values very uniform nanocapsules were obtained accompanying a few of the solid particles.
Synthesis of Oily Core‐hybrid Shell Nanocapsules Through Interfacial Free Radical Copolymerization in Miniemulsion: Droplet Formation and Nucleation

Z. H. Cao,G. R. Shan,N. Sheibat‐Othman,J.‐L. Putaux,E. Bourgeat‐Lami

DOI: https://doi.org/10.1002/pola.23809

2009-01-01

Journal of Polymer Science Part A Polymer Chemistry

Abstract:AbstractNanocapsules with an oily core and an organic/inorganic hybrid shell were elaborated by miniemulsion (co)polymerization of styrene, divinylbenzene, γ‐methacryloyloxy propyl trimethoxysilane, and N‐isopropyl acrylamide. The hybrid copolymer shell membrane was formed by polymerization‐induced phase separation at the interface of the oily nanodroplets with water. It was shown that the size, size distribution, and colloidal stability of the miniemulsion droplets were extremely dependent on the nature of the oil phase, the monomer content and the surfactant concentration. The less water‐soluble the hydrocarbon template and the higher the monomer content, the better the droplet stability. The successful formation of nanocapsules with the targeted core‐shell morphology (i.e., a liquid core surrounded by a solid shell) was evidenced by cryogenic transmission electron microscopy. Both nanocapsules and nanoparticles were produced by polymerization of the miniemulsion droplets. The proportion of nanoparticles increased with increasing monomer concentration in the oil phase. These undesirable nanoparticles were presumably formed by homogeneous nucleation as we showed that micellar nucleation could be neglected under our experimental conditions even for high surfactant concentrations. The introduction of γ‐methacryloyloxy propyl trimethoxysilane was considered to be the main reason for homogeneous nucleation. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 593–603, 2010
Synthesis of Hybrid Nanocapsules by Miniemulsion (co)polymerization of Styrene and Γ-Methacryloxypropyltrimethoxysilane

KF Ni,GR Shan,ZX Weng

DOI: https://doi.org/10.1021/ma052061t

IF: 5.5

2006-01-01

Macromolecules

Abstract:Hybrid nonacapsules are synthesized by miniemulsion (co)polymerization of styrene and 3-trimethoxysilylpropylmethacrylate silane (MPS) in one step. Hydrocarbon droplets are encapsulated by organic-inorganic hybrid material, which is formed by simultaneous free radical polymerization reaction and hydrolysis-condensation reaction of organosilane in MPS. The morphology and the microstructure ire characterized by transmission electron microscopy (TEM), dynamic light scattering (DLS), solid-state NMR. and infrared (IR) spectroscopy. The capsule morphology is achieved by polymerization inducing phase separation within minidroplets dispersed in aqueous phase. The feasibility of the final morphology is analyzed by thermodynamic and kinetic factors first. Particle nucleation processes with different formulation are followed by DLS, and it has a great influence on the latex morphology. Monomer/hydrocarbon ratio in the droplets and MPS fraction in the capsules are also of great important to the morphology due to their influence on phase separation behavior and mechanic properties of capsules, respectively. Finally, the loading and releasing processes of this capsule are monitored by ultraviolet-visible (UV) measurement.
Nanoengineering of Polymeric Capsules with A Shell-In-Shell Structure

ZF Dai,H Mohwald,B Tiersch,L Dahne

DOI: https://doi.org/10.1021/la026491d

IF: 3.9

2002-01-01

Langmuir

Abstract:Polymeric capsules possessing a shell-in-shell structure were fabricated by assembling layers of polyelectrolytes with interlayers of silica nanoparticles onto microspheres of melamine formaldehyde. Subsequently the cores were removed with hydrochloric acid and the silica layers with hydrofluoric acid. Removal of the silica layers leaves an aqueous phase of a poly(allylamine hydrochloride) solution between an outer and an inner polyelectrolyte shell. The interlayer thickness could be varied by the diameter of silica particles or by the number of deposition steps. The double-shell structure of the microcapsules was determined by scanning force microscopy, confocal laser scanning microscopy, and transmission electron microscopy on ultramicrotome sections in detail. In contrast to one-shell capsules of polyelectrolytes, the permeability for small molecules does not change with time and temperature. In addition, the shell-in-shell capsules exhibit a remarkably higher mechanical stability as shown by experiments of osmotically induced deformations.
Morphology Control of Polymer–Inorganic Hybrid Nanomaterials Prepared in Miniemulsion: From Solid Particles to Capsules

Olaia Álvarez-Bermúdez,Inés Adam-Cervera,Katharina Landfester,Rafael Muñoz-Espí

DOI: https://doi.org/10.3390/polym16212997

IF: 5

2024-10-26

Polymers

Abstract:The preparation of so-called hybrid nanomaterials has been widely developed in terms of functional and morphological complexity. However, the specific control of the arrangement of organic and inorganic species, which determines the properties of the final material, still remains a challenge. This article offers a review of the strategies that have been used for the preparation of polymer–inorganic hybrid nanoparticles and nanocapsules via processes involving miniemulsions. Different polymer–inorganic nanostructures are classified into four main groups according to the sequential order followed between the synthesis of the polymer and the inorganic species, and the presence or not of their counterpart precursors. The minimization of the energy of the system governs the self-assembly of the different material components and can be addressed by the miniemulsion formulation to reduce the interfacial tensions between the phases involved. The state of the art in the preparation of hybrid nanoparticles is reviewed, offering insight into the structural possibilities allowed by miniemulsion as a versatile synthetic technique.

polymer science
Penetrating properties of novel organic-inorganic hybrid nanocapsules

Kefan NI,Guorong SHAN,Zhixue WENG

DOI: https://doi.org/10.3321/j.issn:0438-1157.2005.08.035

2005-01-01

Abstract:A novel organic-inorganic hybrid nanocapsule was synt he sized by mini-emulsion copolymerization of styrene and 3-trimethoxysilyl propy l methacrylate (MPS) on the well dispersed octane droplet templates.The morpholo gy was characterized by transmission electron microscopy(TEM) and atom force mic roscopy(AFM).The microstructure parameters were characterized by gas adsorption instrument.The wall of the capsules was found to have microporous structures.Acc ording to these characteristics, a penetration model was established by using th e percolation theory.The penetration diffusion coefficient was dependent on poro sity and tortuosity.The kinetics of the penetration process was studied with ult raviolet-spectrophotometer and diffusion coefficient and tortuosity were calcul ated.Diffusion velocity increased with the increase of MPS content in capsules d ue to larger porosity;tortuosity was less in the cresol red-methanol system tha n in the anthracene-tetrahydrofuran system; and tortuosity nearly did not chang e with the MPS content in capsules. All these results were consistent with the p ercolation theory. The loading of the anthracene was also proved by infrared spe ctrometry, and the release diffusion coefficient was much smaller than that of l oading, but did not change with the MPS content in capsules.
Facile Fabrication of Polymer Nanocapsules with Cross-Linked Organic-Inorganic Hybrid Walls.

Tianyou Chen,Binyang Du,Zhiqiang Fan

DOI: https://doi.org/10.1021/la301872q

IF: 3.9

2012-01-01

Langmuir

Abstract:A facile method was developed for the fabrication of polymer nanocapsules with organic-inorganic hybrid walls and controllable morphologies from a cross-linkable polymer, poly[3-(trimethoxysilyl)propyl methacrylate] (PTMSPMA). With the combination of emulsion, hydrolysis, and condensation reaction as well as the internal phase separation, cross-linked PTMSPMA nanocapsules with classic hollow structures, collapsed hollow structures with Kippah, and multi-fold morphologies could be successfully obtained by simply mixing the toluene solution of PTMSPMA with water under vigorous stirring for 48 h at different temperatures. The hydrolysis and condensation of methoxysilyl groups resulted in the phase separation of PTMSPMA inside the toluene droplets and the migration of PTMSPMA to the interface of toluene and water. The cross-linking reaction of methoxysilyl groups further fixed the interfacial phase of PTMSPMA, leading the formation of PTMSPMA nanocapsules with robust cross-linked organic-inorganic hybrid walls. Such nanocapsules with robust cross-linking structures may find potential applications for the encapsulations of many functional species.
Preparation of Hybrid Nanocapsules

K. Ni,E. Bourgeat-Lami,N. Sheibut-Othman,G. Shan,G. Fevotte

DOI: https://doi.org/10.1002/masy.200851113

2008-01-01

Macromolecular Symposia

Abstract:Hybrid nanoparticles with a polystyrene core and a hybrid copolymer shell were used to produce hybrid nanocapsules by dissolving the polystyrene core from the previously elaborated core-shell particles. Following previous works, the core-shell particles were prepared by emulsion polymerization of styrene and subsequent addition of gamma-methacryloxy propyl trimethoxy silane (MPS) to produce the shell by copolymerization reaction of MPS with the residual styrene. Core extraction was performed by diluting the core-shell particles in an excess of tetrahydrofuran (THF). Two procedures were investigated to separate the dissolved polymer chains from the nanocapsules. In the first procedure, the polymer was isolated by successive centrifugation and redispersion in THF, whereas in the second procedure, the free polymer chains were removed by dialysis. The polymer molecular weight was optimized in order to promote dissolution of the polymer chains and allow them to diffuse through the shell.
Organic-inorganic nanocomposites synthesized viaminiemulsion polymerization

jing hu,min chen,limin wu

DOI: https://doi.org/10.1039/C0PY00284D

IF: 4.6

2011-01-01

Polymer Chemistry

Abstract:Miniemulsion polymerization, a kind of heterogeneous polymerization method, is being more and more used for synthesis of various novel organic-inorganic hybrid materials. In this review, we would seek to highlight the recent development of organic-inorganic nanocomposites synthesized via miniemulsion polymerization. The examples demonstrate that the inorganic nanoparticles, such as oxide magnets, clays, carbon, silica, titanium dioxide, etc., can be embedded inside the polymers or as armor on the surfaces of polymer particles via miniemulsion polymerization to form organic-inorganic nanocomposites with various morphologies.
The effect of monomers on the formulation of polymeric nanocapsules based on polyureas and polyamides

I Montasser,S Briançon,H Fessi

DOI: https://doi.org/10.1016/j.ijpharm.2006.11.011

2007-04-20

Abstract:Formulation of nanocapsules based on polyureas and polyamides have been tested using a patented process. This method based on polycondensation reaction of two complementary monomers and spontaneous formation of oil in water emulsion, is an alternative concept to the known technique based on the same type of reaction used for the formulation of microcapsules, and in which the lipophilic monomer was emulsified in the organic phase before the formation of the polymeric membrane. Nanocapsules can be prepared from different monomers. Wall based on cross-linked polymer contributes to the stability of nanocapsules during and after formulation. The permeability of the polymeric wall is related to its crystallinity and contributes to the growth of nanocapsule membrane by the diffusion of the hydrophilic monomers to get stable colloidal suspensions.
Applications of Polymeric Nanocapsules in Field of Drug Delivery Systems.

Xinyu Rong,Yinghua Xie,Xiaomei Hao,Tao Chen,Yingming Wang,Yuanyuan Liu

DOI: https://doi.org/10.2174/157016311796799008

2011-01-01

Current Drug Discovery Technologies

Abstract:Drug-loaded polymeric nanocapsules have exhibited potential applications in the field of drug delivery systems in recent years. This article entails the biodegradable polymers generally used for preparing nanocapsules, which include both natural polymers and synthetic polymers. Furthermore, the article presents a general review of the different preparation methods: nanoprecipitation method, emulsion-diffusion method, double emulsification method, emulsion-coacervation method, layer-by-layer assembly method. In addition, the analysis methods of nanocapsule characteristics, such as mean size, morphology, surface characteristics, shell thickness, encapsulation efficiency, active substance release, dispersion stability, are mentioned. Also, the applications of nanocapsules as carriers for use in drug delivery systems are reviewed, which primarily involve targeting drug delivery, controlled/sustained release drug delivery systems, transdermal drug delivery systems and improving stability and bioavailability of drugs. Nanocapsules, prepared with different biodegradable polymers, have received more and more attention and have been regarded as one of the most promising drug delivery systems.
Preparation of Polymeric Nanocapsules by Gamma-Ray-Initiated Miniemulsion Polymerization

Shijie Wang,Yunchen,Zhicheng Zhang

DOI: https://doi.org/10.1246/cl.2007.120

2006-01-01

Chemistry Letters

Abstract:Hollow polystyrene (PS) nanocapsules were synthesized through gamma-ray-initiated miniemulsion polymerization by using an alkali-soluble polymeric surfactant (ASPS) as surfactant in the presence of hexadecane (HD). The results indicated that nanocapsules with different particle size and shell thickness could easily prepared by this method, and ASPS can promote the formation of completely hollow structures.

Polymeric Nanocapsules by Interfacial Miniemulsion Polymerization

Techniques of synthesizing polymeric (hollow) sub-micro/nanocapsules

Nanoencapsulation of A Hydrophobic Compound by A Miniemulsion Polymerization Process

Facile synthesis of nanocapsules and hollow nanoparticles consisting of fluorinated polymer shells by interfacial RAFT miniemulsion polymerization

Synthesis of Polymeric Nanocapsules with a Crosslinked Shell Through Interfacial Miniemulsion Polymerization

Synthesis of Organic-inorganic Hybrid Nanocapsules by Using Low Molecular Weight Droplets as Template

A Facile Route to Synthesize Highly Uniform Nanocapsules: Use of Amphiphilic Poly(acrylic Acid)‐block‐polystyrene RAFT Agents to Interfacially Confine Miniemulsion Polymerization

A General Strategy for Nano‐Encapsulation Via Interfacially Confined Living/Controlled Radical Miniemulsion Polymerization

Miniemulsion Polymerization as a Means to Encapsulate Organic and Inorganic Materials

Ph Effects on the Synthesis of Nanocapsules Via Interfacial Miniemulsion Polymerization Mediated by Amphiphilic Raft Agent with the R Group of Poly(Methyl Acrylic Acid-Ran-Styrene)

Synthesis of Oily Core‐hybrid Shell Nanocapsules Through Interfacial Free Radical Copolymerization in Miniemulsion: Droplet Formation and Nucleation

Synthesis of Hybrid Nanocapsules by Miniemulsion (co)polymerization of Styrene and Γ-Methacryloxypropyltrimethoxysilane

Nanoengineering of Polymeric Capsules with A Shell-In-Shell Structure

Morphology Control of Polymer–Inorganic Hybrid Nanomaterials Prepared in Miniemulsion: From Solid Particles to Capsules

Penetrating properties of novel organic-inorganic hybrid nanocapsules

Facile Fabrication of Polymer Nanocapsules with Cross-Linked Organic-Inorganic Hybrid Walls.

Preparation of Hybrid Nanocapsules

Organic-inorganic nanocomposites synthesized viaminiemulsion polymerization

The effect of monomers on the formulation of polymeric nanocapsules based on polyureas and polyamides

Applications of Polymeric Nanocapsules in Field of Drug Delivery Systems.

Preparation of Polymeric Nanocapsules by Gamma-Ray-Initiated Miniemulsion Polymerization