Y-shaped Block Copolymer (Methoxy-Poly(ethylene Glycol))2-B-poly(l-glutamic Acid): Preparation, Self-Assembly, and Use As Drug Carriers

Lixin Yang,Xiuli Hu,Weiqi Wang,Shi Liu,Tingting Sun,Yubin Huang,Xiabin Jing,Zhigang Xie

DOI: https://doi.org/10.1039/c4ra07890j

IF: 4.036

2014-01-01

RSC Advances

Abstract:The nano polymer drugs based on Y-shaped block copolymer mPEG2-PGA show a great potential on the treatment for solid tumors.

What problem does this paper attempt to address?

Novel Amphiphilic, Biodegradable, Biocompatible, Cross-Linkable Copolymers: Synthesis, Characterization and Drug Delivery Applications

Qiao Jin,Samarendra Maji,Seema Agarwal

DOI: https://doi.org/10.1039/c2py20364b

IF: 4.6

2012-01-01

Polymer Chemistry

Abstract:The synthesis of a new kind of amphiphilic poly(vinyl-co-ester)s via simple one-pot radical ring-opening polymerization (RROP) is reported. A series of biodegradable, biocompatible, and cross-linkable copolymers P(MDO-co-PEGMA-co-CMA) with different compositions were synthesized by copolymerization of 2-methylene-1,3-dioxepane (MDO), poly(ethylene glycol) methyl ether methacrylate (PEGMA) and 7-(2-methacryloyloxyethoxy)-4-methylcoumarin methacrylate (CMA). All the copolymers were well characterized by H-1 NMR, C-13 NMR, and gel permeation chromatography (GPC). The hydrolytic degradation and enzymatic degradation of the copolymers were investigated. The amphiphilic P(MDO-co-PEGMA-co-CMA) can self-assemble into micelles in aqueous solution. Polymeric micelles with different sizes were obtained through tuning the compositions of the copolymers, i.e., the hydrophilic/hydrophobic ratio. The size and morphology of the micelles were measured by dynamic light scattering (DLS) and transmission electron microscopy (TEM). Because of the coumarin side groups in the micellar core, the micelles can be cross-linked upon exposure to long-wavelength UV light (lambda = 365 nm). These micelles also showed excellent biocompatibility by the in vitro cytotoxicity experiments. Furthermore, the biodegradable micelles were applied for the delivery of an anticancer drug doxorubicin (DOX). The cell viability of DOX-loading micelles compared to free DOX was discussed. The effects of cross-linking and the copolymer composition on the drug release behavior were well studied. The results indicate that this new kind of amphiphilic poly(vinyl-co-ester) s could serve as promising nanocarriers for the delivery of anticancer drugs.
PLLAGrafted Gelatin Amphiphilic Copolymer and Its SelfAssembled Nano Carrier for Anticancer Drug Delivery

Du Beibei,Fan Tiantang,Li Jiafeng,Gong Li,Zhang Qin,Ye Wuyou,Tai Hongyun,Wang Wenxin,Fan Zhongyong

DOI: https://doi.org/10.1002/macp.201800528

IF: 2.996

2019-01-01

Macromolecular Chemistry and Physics

Abstract:A series of poly(l-lactide)-grafted gelatin (Gel-g-PLLA) copolymers are synthesized by coupling the amino groups of gelatin with different molar masses and the carboxyl endgroup of poly(l-lactide) in the presence of 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide hydrochloride and N-hydroxysuccinimide. Fourier transform infrared and nuclear magnetic resonance (H-1 NMR) data confirm the successful bonding between gelatin and PLLA. Self-assembled micelles of copolymers are prepared by using the direct dissolution method. The size and micellar morphology are determined from dynamic light scattering as well as transmission electron microscopy measurements. Meanwhile, in vitro drug release reveals that Gel-g-PLLA micelles show excellent sustained-release properties when used as the carrier of the anticancer drug paclitaxel. A burst release of about 70% is observed in the first 24 h. All these features, together with the outstanding biocompatibility, make Gel-g-PLLA micelles a promising drug carrier for cancer therapy.
A Block Copolymer of Zwitterionic Polyphosphoester and Polylactic Acid for Drug Delivery.

Rong Sun,Xiao-Jiao Du,Chun-Yang Sun,Song Shen,Yang Liu,Xian-Zhu Yang,Yan Bao,Yan-Hua Zhu,Jun Wang

DOI: https://doi.org/10.1039/c4bm00430b

2015-01-01

Biomaterials Science

Abstract:Polymeric nanoparticles have been widely used as nano-drug delivery systems in preclinical and clinical trials for cancer therapy, and these systems usually need to be sterically stabilized by poly(ethylene glycol) (PEG) to maintain stability and avoid rapid clearance by the immune system. Recently, zwitterionic materials have been demonstrated to be potential alternatives to the classic PEG. Herein, we developed two drug delivery systems stabilized by zwitterionic polyphosphoesters. These nanoparticles showed favourable stability and anti-protein absorption ability in vitro. Meanwhile, as drug carriers, these zwitterionic polyphosphoester-stabilized nanoparticles significantly prolonged drug circulation half-lives and increased drug accumulation in tumors, which was comparable to PEG-stabilized nanoparticles. Systemic delivery of doxorubicin (DOX) by zwitterionic polyphosphoester-stabilized nanoparticles significantly inhibited tumor growth in a MDA-MB-231 tumor model, suggesting the potential of zwitterionic polyphosphoester-based nanoparticles in anticancer drug delivery.
Poly(L-Glutamic Acid)-Based Brush Copolymers: Fabrication, Self-assembly, and Evaluation as Efficient Nanocarriers for Cationic Protein Drug Delivery

Xin Li,Chao Lu,Wenquan Xia,Guilan Quan,Ying Huang,Xuequn Bai,Feiyuan Yu,Qian Xu,Wanbing Qin,Daojun Liu,Xin Pan

DOI: https://doi.org/10.1208/s12249-020-1624-4

IF: 3.3

2020-01-22

AAPS PharmSciTech

Abstract:Protein drugs were considered to be the first choice to treat many human diseases, but their clinical application was usually limited by their short half-life and lack of validated targeted therapy. Here, a series of folate-functionalized poly(ethylene glycol)-b-(poly(2-aminoethyl-L-glutamate)-g-poly(L-glutamic acid))s (FA-PEG-b-(PELG-g-PLGA)s) were designed as tumor-targeted carriers for cationic protein delivery. Compared with traditional copolymers consisting of PEG and linear charged hydrophilic blocks, FA-PEG-b-(PELG-g-PLGA) with brush-like polyelectrolyte segments were beneficial to improving their electrostatic interactions with loading protein molecules, thus increasing drug-loading stability and protecting encapsulated proteins from degradation. The designed polymer brushes could efficiently encapsulate cytochrome C (CytC), a cationic model protein, to form polyion complex (PIC) micelles with an average particle size of approximately 200 nm. An in vitro drug release study showed that the drug-loading stability of the formed PIC micelles was largely improved. The functionalization of the block copolymer carriers with a targeting folate group enhanced the tumor cell growth inhibition and total apoptotic rates induced by CytC. Our results shed light on the unique advantages of brush-like polymer carriers in delivering cationic proteins, and the poly(L-glutamic acid)-based linear-brush diblock copolymers could be applied as a versatile delivery platform for molecular targeting in cancer therapy.
A hyperbranched amphiphilic acetal polymer for pH-sensitive drug delivery

Hongliang Cao,Chao Chen,Debiao Xie,Xin Chen,Ping Wang,Yibing Wang,Huajie Song,Wenxin Wang

DOI: https://doi.org/10.1039/c7py01739a

IF: 4.6

2018-01-01

Polymer Chemistry

Abstract:Nanoparticles are appealing drug delivery systems since they promise prolonged circulation time and predictable release behaviors. The current work reports a novel hyperbranched amphiphilic block copolymer synthesized using deactivation-enhanced atom transfer radical polymerization (DE-ATRP) for smart drug delivery. PEG2000-Br was applied as a macroinitiator to initiate acid-cleavable divinyl (ACD) monomers linked by acetal groups, formulating the hydrophilic (PEG) and hydrophobic (ACD) segments. The polymer appeared to self-assemble into micelles with diameters in the range of 70-100 nm, and was examined for the controlled release of doxorubicin (DOX). Results showed that DOX-loaded micelles (similar to 90 nm) could achieve drug loading as high as 8.2 wt%, with interesting pH-dependent release behaviors. Studies with flow cytometry (FCM) and confocal laser scanning microscopy (CLSM) showed that DOX-loaded micelles exhibited a high cellular uptake performance by HeLa cells, which indicated promising antitumor efficacy for such a drug delivery system. Additionally, such DOX-loaded micelles exhibited remarkable cytotoxicity against HeLa cells in a dose-and time-dependent manner due to the enhanced cell uptake behavior of micelles. These results indicated that the polymeric micelles might be used as a promising candidate for a pH-responsive drug delivery for cancer therapy.
Galactose-based amphiphilic block copolymers: synthesis, micellization, and bioapplication.

Ying Wang,Chun-Yan Hong,Cai-Yuan Pan

DOI: https://doi.org/10.1021/bm4003078

2013-01-01

Biomacromolecules

Abstract:Redox-responsive amphiphilic diblock copolymers, poly(6-O-methacryloyl-D-galactopyranose-co-2-(N,N-dimethylaminoethyl) methacrylate)-b-poly(pyridyl disulfide ethyl methylacrylate) (P(MAGP-co-DMAEMA)-b-PPDSMA) were obtained by deprotection of poly((6-O-methacryloyl-1,2:3,4-di-O-isopropylidene-D-galactopyranose)-co-DMAE-MA)-b-PPDSMA [P(MAlpGP-co-DMAEMA)-b-PPDSMA], which were prepared via reversible addition-fragmentation chain transfer (RAFT) polymerization of PDSMA using P(MAlpGP-co-DMAEMA) as macro-RAFT agent. Dynamic light scattering (DLS) and transmission electron microscopy (TEM) studies showed that diblock copolymers P(MAGP-co-DMAEMA)-b-PPDSMA can self-assemble into micelles. Doxorubicin (DOX) could be encapsulated by P(MAGP-co-DMAEMA)-b-PPDSMA upon micellization and released upon adding glutathione (GSH) into the micelle solution. The galactose functional groups in the PMAGP block had specific interaction with HepG2 cells, and P(MAGP-co-DMAEMA)-b-PPDSMA can act as gene delivery vehicle. So, this kind of polymer has potential applications in hepatoma-targeting drug and gene delivery and biodetection.
Synthesis and drug delivery of novel amphiphilic block copolymers containing hydrophobic dehydroabietic moiety

Jing Wang,Kejian Yao,Chongzhi Wang,Chuanbing Tang,Xiqun Jiang

DOI: https://doi.org/10.1039/c3tb20100g

IF: 7.571

2013-01-01

Journal of Materials Chemistry B

Abstract:Well-defined amphiphilic poly(ethylene glycol) and poly(dehydroabietic ethyl methacrylate) block copolymers (PEG-b-PDAEMA) were prepared by atom transfer radical polymerization. The methacrylate block contains a characteristic hydrophobic, biocompatible and economical dehydroabietic moiety. PEG-b-PDAEMA block copolymer micellar nanoparticles loaded with piperlongumine (PLGM) were successfully prepared by a nanoprecipitation method. In vitro and in vivo behaviors of these nanoparticles were thoroughly examined by a set of characterization techniques. Confocal laser scanning microscopy study revealed that these nanoparticles could be well taken up by cancer cells. In vivo near-infrared fluorescence imaging showed that the PLGM-loaded nanoparticles effectively targeted the tumor site by the enhanced permeability and retention (EPR) effect in H22 tumor-bearing mice. The in vivo antitumor examination found that PLGM-loaded nanoparticles exhibited superior efficacy in impeding the tumor growth compared to the commercially available Taxol (R) and free PLGM formulation. The changes in body weights and blood biochemical profiles were also compared to investigate the safety of PLGM and PEG-b-PDAEMA nanoparticle drug delivery system.
Novel block glycopolymers prepared as delivery nanocarriers for controlled release of bortezomib

Xiaoting Zhang,Tianyu Yuan,Hailiang Dong,Jiaming Xu,Danyue Wang,Han Tong,Xiaohuan Ji,Bin Sun,Meifang Zhu,Xiaoze Jiang

DOI: https://doi.org/10.1007/s00396-018-4406-8

Abstract:To explore block glycopolymers as novel polymeric delivery nanocarriers for anticancer drug bortezomib (BTZ), three types of block glycopolymers, poly(ethylene glycol)-block-poly(gluconamido ethyl methacrylate) (PEG113-b-PGAMA20), poly(ethylene glycol)-block-poly(styrene)-block-poly(gluconamido ethyl methacrylate) (PEG113-b-PS50-b-PGAMA20), and poly(ethylene glycol)-block-poly(2-(diethyl amino) ethyl methacrylate)-block-poly(gluconamido ethyl methacrylate) (PEG113-b-PDEA50-b-PGAMA20), were synthesized via atom transfer radical polymerization (ATRP) using a PEG-based ATRP macroinitiator. Three glycopolymers possess the capacity to load BTZ via pH-induced dynamic covalent bonding and/or hydrophobic interaction with their specific self-assembly behaviors, and PEG113-b-PS50-b-PGAMA20 carrier maintains the sustain release behavior of BTZ due to the stable micellar structure; PEG113-b-PDEA50-b-PGAMA20 carrier realizes the abrupt release at pH 5.5 by collapse of micellar structure, while PEG113-b-PGAMA20 carrier exhibits the fastest release at studied solution pHs. This study would provide a light to develop novel block glycopolymer carrier for the delivery of anticancer drug bearing boronic acid groups. Graphical abstractᅟᅟ.
Peg-B-Ptba-B-Phema Well-Defined Amphiphilic Triblock Copolymer: Synthesis, Self-Assembly, And Application In Drug Delivery

Li Yuan,Wulian Chen,Jing Li,Jianhua Hu,Jianjun Yan,Dong Yang

DOI: https://doi.org/10.1002/pola.26273

2012-01-01

Abstract:A series of well-defined amphiphilic triblock copolymers, poly(ethylene glycol)-b-poly(tert-butyl acrylate)-b-poly(2-hydroxyethyl methacrylate) (PEG-b-PtBA-b-PHEMA), were synthesized via successive atom transfer radical polymerization (ATRP). ATRP of tBA was first initiated by PEG-Br macroinitiator using CuBr/N,N,N',N",N"-pentamethyldiethylenetriamine as catalytic system to give PEG-b-PtBA diblock copolymer. This copolymer was then used as macroinitiator to initiate ATRP of HEMA, which afforded the target triblock copolymer, PEG-b-PtBA-b-PHEMA. The critical micelle concentrations of obtained amphiphilic triblock copolymers were determined by fluorescence spectroscopy using N-phenyl-1-naphthylamine as probe. The morphology and size of formed aggregates were investigated by transmission electron microscopy and dynamic light scattering, respectively. Finally, an acid-sensitive PEG-b-PtBA-b-P(HEMA-CAD) prodrug via cis-aconityl linkage between doxorubicin and hydroxyls of triblock copolymers with a high drug loading content up to 38%, was prepared to preliminarily explore the application of triblock copolymer in drug delivery. (c) 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012
Synthesis, Characterization, and in Vitro Evaluation of Long-Chain Hyperbranched Poly(ethylene Glycol) As Drug Carrier.

Yan Pang,Jinyao Liu,Jieli Wu,Guolin Li,Ruibin Wang,Yue Su,Peng He,Xinyuan Zhu,Deyue Yan,Bangshang Zhu

DOI: https://doi.org/10.1021/bc100325a

IF: 4.7

2010-01-01

Bioconjugate Chemistry

Abstract:A series of novel long-chain hyperbranched poly(ethylene glycol)s (LHPEGs) with biodegradable connections were designed and synthesized in one pot through proton-transfer polymerization using PEG and commercial glycidyl methacrylate as monomers and potassium hydride as catalyst. The LHPEGs were hydrolyzed at neutral pH resulting in the decrease of molecular weights. In vitro evaluation demonstrated that LHPEGs were biocompatible and displayed negligible hemolytic activity. The efficient cellular uptake of LHPEGs was confirmed by flow cytometry and confocal laser scanning microscopy. Moreover, conjugation of a model hydrophobic anticancer drug methotrexate to LHPEGs inhibited the proliferation of a human cervical carcinoma Hela cell line. MTT assay indicated that the conjugated methotrexate dose required for 50% cellular growth inhibition against Hela cells was 20 μg/mL. By combining the advantages of long-chain hyperbranched structure and PEG, LHPEG provides a promising drug carrier for therapeutic fields.
Synthesis and Self-Assembly of Poly(Ethylene Oxide)-B-Poly(Lactic Acid)-B-Poly(2-Hydroxyethyl Methacrylate) Amphiphilic Triblock Copolymer

Chenbin Xi,Dong Yang,Jing Li,Jianjun Yan,Jianhua Hu

DOI: https://doi.org/10.6023/cjoc201206009

2012-01-01

Chinese Journal of Organic Chemistry

Abstract:Amphiphilic copolymers that can assemble into core-shell micelles in aqueous media have potential application as drug carriers for controlled-release. In this article an amphiphilic triblock copolymer poly(ethylene oxide)-block-poly(lactic acid)-block-poly(2-hydroxyethyl methacrylate) (PEG-b-PLA-b-PHEMA) was synthesized by ring-opening reaction and atom transfer radical polymerization. The polymers were characterized by H-1 NMR, FT-IR and gel permeation chromatography. In aqueous solution, PEG-b-PLA-b-PHEMA can self-assemble into micelles. Characterized by DLS and TEM, micelles are found to be spherical with uniform size. Large numbers of hydroxyl groups on the PHEMA chain offer reaction sites for subsequent functional modification, which make it a promising platforms for drug delivery systems.
Self-assembled pH-responsive MPEG-b-(PLA-co-PAE) block copolymer micelles for anticancer drug delivery

Can Yang Zhang,You Qiang Yang,Tu Xiong Huang,Bin Zhao,Xin Dong Guo,Ju Fang Wang,Li Juan Zhang

DOI: https://doi.org/10.1016/j.biomaterials.2012.05.025

IF: 14

2012-09-01

Biomaterials

Abstract:A series of amphiphilic pH-responsive poly (ethylene glycol) methyl ether-b-(poly lactic acid-co-poly (β-amino esters)) (MPEG-b-(PLA-co-PAE)) block copolymers with different PLA/PAE ratios were designed and synthesized via a Michael-type step polymerization. The molecular structures of the copolymers were confirmed with (1)H NMR and gel permeation chromatography (GPC). These amphiphilic copolymers were shown to self-assemble into core/shell micelles in aqueous solution at low concentrations, and their critical micelle concentrations (CMC) in water were 1.2-9.5 mg/L. The pH-responsive PAE segment was insoluble at pH 7.4, but it became positively charged and soluble via protonation of amino groups at pH lower than 6.5. The average particle size and zeta potential of micelles increased from 180 nm and 15 mV to 220 nm and 40 mV, respectively, when the pH decreased from 7.4 to 5.0. Doxorubicin (DOX) was loaded into the core of these micelles with a high drug loading of 18%. The in vitro DOX release from the micelles was significantly accelerated when solution pH decreased from 7.4 to 5.0. DOX release in the first 10 h appeared to follow Fickian diffusion mechanism. Toxicity test showed that the copolymers had low toxicity whereas the DOX-loaded micelles remained high cytotoxicity for HepG2 cells. The results indicate the pH-sensitive MPEG-b-(PLA-co-PAE) micelle may be a potential hydrophobic drug delivery carrier for cancer targeting therapy with sustained release.

engineering, biomedical,materials science, biomaterials
Hydrophilic Poly(Glutamic Acid)-Based Nanodrug Delivery System: Structural Influence and Antitumor Efficacy

Yifei Guo,Yiping Shen,Bo Yu,Lijuan Ding,Zheng Meng,Xiaotong Wang,Meihua Han,Zhengqi Dong,Xiangtao Wang

DOI: https://doi.org/10.3390/polym14112242

IF: 5

2022-05-31

Polymers

Abstract:Poly(amino acids) have advanced characteristics, including unique secondary structure, enzyme degradability, good biocompatibility, and stimuli responsibility, and are suitable as drug delivery nanocarriers for tumor therapy. The isoform structure of poly(amino acids) plays an important role in their antitumor efficacy and should be researched in detail. In this study, two kinds of pH-sensitive isoforms, including α-poly(glutamic acid) (α-PGA) and γ-PGA, were selected and used as nanocarriers to prepare a nanodrug delivery system. According to the preparation results, α-PGA can be used as an ideal drug carrier. Selecting doxorubicin (DOX) as the model drug, an α-PGA/DOX nanoparticle (α-PGA/DOX NPs) with a particle size of 110.4 nm was prepared, and the drug-loading content was 66.2%. α-PGA/DOX NPs presented obvious sustained and pH-dependent release characteristics. The IC50 value of α-PGA/DOX NPs was 1.06 ± 0.77 μg mL−1, decreasing by approximately 8.5 fold in vitro against 4T1 cells after incubation for 48 h. Moreover, α-PGA/DOX NPs enhanced antitumor efficacy in vivo, the tumor inhibition rate was 67.4%, increasing 1.5 fold over DOX injection. α-PGA/DOX NPs also reduced the systemic toxicity and cardiotoxicity of DOX. In sum, α-PGA is a biosafe nanodrug delivery carrier with potential clinical application prospects.

polymer science
Synthesis and self-assembly of amphiphilic diblock polycarbonates with various pendant hydrophilic groups

Hong Zhai,Kaibin Chen,Yue Meng,Zejia Wu,Rongli Deng,Ying Bai,Jing Zhou,Daping Quan

DOI: https://doi.org/10.1016/j.polymer.2022.124664

IF: 4.6

2022-03-01

Polymer

Abstract:Self-assembled micro-paricles have been proven to be efficient microcarriers for delivering various therapeutic agents. Polycarbonates have demonstrated excellent biodegradability and biocompatibility as material for polymeric microcarriers. A diblock polycarbonate with tunable block length and active sites is synthesized via one-pot sequential ring-opening polymerization (ROP). The polymer acts as a material platform for versatile modifications to prepare a series of amphiphilic diblock polycarbonates which can self-assemble into microparticles. The effect of different hydrophilic pendent groups controlling the morphology and surface charge of the assemblies is systematically investigated. The non-equilibrium spherical particles with varying sizes are formed in one day, and the spheres can further assemble into multi-compartments vesicles (MCVs). Cationic, anionic or neutral carriers can be prepared depending on the type of pendant groups attached. The versatile amphiphilic copolymer assemblies have good potential in biomedical applications.

polymer science
Synthesis and Characterization of Amphiphilic Block Copolymer of Poly (ethylene glycol)-Poly (β-benzyl-L-aspartic)

陈永超,蒲晓辉,宗兰兰,李晓花,杨强,刘彤,吴雪记,袁琦,白锋

DOI: https://doi.org/10.3969/j.issn.1003-4978.2015.04.007

2015-01-01

Abstract:β-Benzyl-L-aspartic was synthesized by the reaction of L-aspartic and benzyl alcohol.N-carboxy-β-benzylL-aspartic anhydride(BLA-NCA)was synthesized fromβ-benzyl-L-aspartic and triphosgene.Amine-terminated poly(ethylene glycol)monomethyl ether(MPEG-NH2)was used as initiator,initiating NCA ring opening polymerization to produce poly(ethylene glycol)monomethyl ether poly(β-benzyl-L-aspartic)(PEG-PBLA)diblock copolymers with different molecular weights.The structural characteristics of copolymers were attested by means of 1 H NMR,IR and fluorescence spectrophotometer.The results showed that it could be proved that the resulting polymers had a kind of synthetic block structure according to the NMR and IR spectra,and the adjustment of the feed ratio between MPEG-NH2 and NCA brought three different block copolymers with different molecular weights and the critical micelle concentration(CMC).The results laid the groundwork for further studying the stabilizing effect of the drug polymer nanoparticles with different properties.
Biocompatible propylene glycol alginate-g-polytetrahydrofuran amphiphilic graft copolymers for highly effective drug carriers

Yu-Zhuang Gao,Jun-Cai Chen,Zhe Cui,Cong-Lei Zhao,Yi-Xian Wu

DOI: https://doi.org/10.1016/j.polymer.2022.124706

IF: 4.6

2022-04-01

Polymer

Abstract:The acylated propylene glycol alginate-g-polytetrahydrofuran amphiphilic graft copolymers (APGA-g-PTHF) with various grafting numbers (GN) of 3–23 per 1000 monosaccharide rings and PTHF (PTMG or PTMO) branches length (Mn,PTHF) with different molecular weights of 600–3400 g/mol could be successfully synthesized via nucleophilic substitution of PTHF living chains carrying oxonium ions with –OH side groups of APGA backbone. The nanophase separation, the hydrophobicity and the surface roughness were increased due to the less restricted movement of hydrophobic PTHF branches to the surface. APGA-g-PTHF graft copolymers behave low cytotoxicity and good anti-protein performance. Interestingly, APGA-g-PTHF amphiphilic graft copolymers could form homogeneous nanospheres (<250 nm) via self-assembly in H2O/CH2Cl2 medium which could be used for drug (ibuprofen or curcumin) carriers having high drug loading efficiency (∼45%) and fast release behavior. The nanospheres carried drug behave very higher (10-fold) anticancer effect against HeLa cells than that of curcumin and thus reduces the harmful drug dosage. Moreover, nanospheres carried drug might enter into HeLa cells and present pH-sensitive drug release. To the best of our knowledge, this is the first example of PGA-based graft copolymers for highly effective nano-carriers and anti-protein surfaces, which would have a prospect in biomedical areas.

polymer science
Self-Assembled Polyprodrug Amphiphile for Subcutaneous Xenograft Tumor Inhibition with Prolonged Acting Time In Vivo.

Dong Chen,Yu Huang,Shuting Xu,Huangyong Jiang,Jieli Wu,Xin Jin,Xinyuan Zhu

DOI: https://doi.org/10.1002/mabi.201700174

2017-01-01

Macromolecular Bioscience

Abstract:Polymeric drug delivery system termed as "polyprodrug amphiphile" poly(2-methylacryloyloxyethyl phosphorylcholine)-b-poly(10-hydroxy-camptothecin methacrylate (pMPC-b-pHCPT) is developed for the prolonged-acting cancer therapy. It is obtained by two-step reversible addition-fragmentation chain transfer polymerization of zwitterionic monomer MPC and an esterase-responsive polymerizable prodrug methacrylic anhydride-CPT, respectively. This diblock polymer is composed of both antifouling (pMPC) and bioactive (pHCPT) segments and the drug is designed as a building block to construct the polymer skeleton directly. Due to its distinct amphiphilicity, the polymer can self-assemble into micelles with different dynamic sizes by facilely tuning the ratio of MPC/HCPT under physiological conditions. The outer pMPC shell is superhydrophilic to form dense hydrate layer preventing the nanosystem from unwanted nonspecific protein adsorption, which is the main lead cause of the rapid clearance of nanoparticles in vivo, thus facilitating the accumulation of drugs in tumor sites via enhanced permeability and retention effect. The configuration of the polyprodrug amphiphile is confirmed by several measurements. The resistance to albumin adsorption, prolonged plasma retention time, accumulation in tumor sites, and anticancer activity of the micelles is also investigated in vitro and in vivo. This novel amphiphile can be expected as a promising agent for the passive targeted prolonged-acting cancer therapy.
Dual-Responsive Polymer Vesicles Capable of Co-loading Two Antitumor Drugs

LI Guodong,LI Gaoyang,AN Zhenhui,XU Shouhong,LIU Honglai

DOI: https://doi.org/10.14133/j.cnki.1008-9357.20230608001

2023-01-01

Abstract:Synergistic therapeutic effect through the intracellular co-delivery of chemotherapy and biomacromolecule drugs is a novel strategy for improving tumor treatment effectiveness. A triblock copolymer, poly(acrylic acid)-poly(N, N-diisopropylaminoethyl methacrylate)-poly(N-vinylcaprolactam) (PAA-PDPA-PNVCL), was designed and synthesized for the construction of smart responsive drug carriers. The structure of the polymers was verified by nuclear magnetic resonance spectroscopy (1H-NMR) and fluorescence spectrophotometer (FL). The transmittances of the polymer solutions under different pH values or temperatures were measured by ultraviolet-visible spectroscopy (UV-Vis). Results showed that the polymer had excellent pH responsiveness and a low critical solution temperature (LCST), which could self-assemble into vesicles with PAA as hydrophilic shell, PDPA as hydrophobic intermediate layer and PNVCL as hydrophilic cavity. Then, the PAA shell layer was crosslinked with disulfide bonds through amide reaction, to improve the structural stability of vesicles and meanwhile introduce the reduction sensitivity. The changes of the particle size, Zeta potential, and morphology of the vesicle under different conditions were studied by dynamic light scattering (DLS) and transmission electron microscopy (TEM). Results showed that the shell-crosslinked vesicles were uniformly sized spherical structure with good pH value and reduction responsiveness. Their drug encapsulation effect and in-vitro release behavior under different pH values and glutathione (GSH) concentrations were studied by UV-Vis and FT-IR. Results showed that the carriers could achieve zoned and co-loading of hydrophobic small molecule drug (doxorubicin (DOX)) and hydrophilic macromolecular protein drug model (bovine serum protein (BSA)). The hydrophobic layer of PDPA and the crosslinked layer of PAA provided dual-blockade for drug leakage. The leakage of drugs under normal physiological conditions was low, and the release of DOX and BSA could only be triggered under simulated tumor microenvironment, that is, weak acid and high concentration of GSH conditions. The smart responsive drug carriers constructed in this paper are expected to achieve co-delivery of chemotherapy and biomacromolecule drugs, which have potential application value to the clinical treatment of tumors.
Preparation and Characterization of Polymeric Micelles from Poly(D, L-lactide) and Methoxypolyethylene Glycol Block Copolymers as Potential Drug Carriers

Zhang Jianzheng,Jiang Wei,Zhao Xiuwen,Wang Yundong

DOI: https://doi.org/10.1016/S1007-0214(07)70073-1

2007-01-01

Abstract:Amphiphilic diblock copolymers composed of methoxy polyethylene glycol (MePEG) and poly(D,L-lactide) (PDLLA) were prepared for the preparation of polymeric micelles. The use of MePEG-PDLLA as drug carriers has been reported in the open literature, but there are only few data on the application of a series of MePEG-PDLLA copolymers with different lengths in the medical field. The shape of the polymeric micelles is also important in drug delivery. Studies on in vitro drug release profiles require a good sink condition. The critical micelle concentration of a series of MePEG-PDLLA has a significant role in drug release. To estimate their feasibility as a drug carrier, polymeric micelles made of MePEG-PDLLA block copolymer were prepared by the oil in water (O/W) emulsion method. From dynamic light scattering (DLS) measurements, the size of the micelle formed was less than 200 nm. The critical micelle concentration of polymeric micelles with various compositions was determined using pyrene as a fluorescence probe. The critical micelle concentration decreased with increasing number of hydrophobic segments. MePEG-PDLLA micelles have a considerably low critical micelle concentration (0.4–0.5 μg/mL), which is apparently an advantage in utilizing these micelles as drug carriers. The morphology of the polymeric micelles was observed using scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The micelles were found to be nearly spherical. The yield of the polymeric micelles obtained from the O/W method is as high as 85%.
Abc Block Copolymer As "smart" Ph-Responsive Carrier for Intracellular Delivery of Hydrophobic Drugs

Jia Yao,Yuelei Ruan,Tao Zhai,Jun Guan,Guping Tang,Haoran Li,Sheng Dai

DOI: https://doi.org/10.1016/j.polymer.2011.05.039

IF: 4.6

2011-01-01

Polymer

Abstract:Amphiphilic triblock copolymer of poly(ethylene glycol)-block-poly(dimethylaminoethyl methacrylate)-block-poly(ε-caprolatone) (PEG-PDMA-PCL) was synthesized using a one-pot sequential oxyanionic polymerization of DMA and ε-CL, associated with a PEG-O−K+ macroinitiator. The pH-responsive micellization behavior of the copolymer was studied using dynamic light scattering (DLS), steady–state fluorescence and TEM techniques. The anti-cancer drug of doxorubicin (DOX) was chosen as a model drug to investigate the potential application of this triblock copolymer in drug controlled release. The results indicated the important roles of the PCL block for drug loading, the PDMA block for pH-responsive release, and PEG block for good bio-affinity. Cell cytotoxicity tests showed that the DOX-loaded PEG-PDMA-PCL micelles were pharmaceutically active to suppress the growth of SKOV-3 cells. This novel stimuli–responsive block copolymer is an attractive candidate as the “smart” pH-responsive carrier for intracellular delivery of hydrophobic drugs.

Y-shaped Block Copolymer (Methoxy-Poly(ethylene Glycol))2-B-poly(l-glutamic Acid): Preparation, Self-Assembly, and Use As Drug Carriers

Novel Amphiphilic, Biodegradable, Biocompatible, Cross-Linkable Copolymers: Synthesis, Characterization and Drug Delivery Applications

PLLAGrafted Gelatin Amphiphilic Copolymer and Its SelfAssembled Nano Carrier for Anticancer Drug Delivery

A Block Copolymer of Zwitterionic Polyphosphoester and Polylactic Acid for Drug Delivery.

Poly(L-Glutamic Acid)-Based Brush Copolymers: Fabrication, Self-assembly, and Evaluation as Efficient Nanocarriers for Cationic Protein Drug Delivery

A hyperbranched amphiphilic acetal polymer for pH-sensitive drug delivery

Galactose-based amphiphilic block copolymers: synthesis, micellization, and bioapplication.

Synthesis and drug delivery of novel amphiphilic block copolymers containing hydrophobic dehydroabietic moiety

Novel block glycopolymers prepared as delivery nanocarriers for controlled release of bortezomib

Peg-B-Ptba-B-Phema Well-Defined Amphiphilic Triblock Copolymer: Synthesis, Self-Assembly, And Application In Drug Delivery

Synthesis, Characterization, and in Vitro Evaluation of Long-Chain Hyperbranched Poly(ethylene Glycol) As Drug Carrier.

Synthesis and Self-Assembly of Poly(Ethylene Oxide)-B-Poly(Lactic Acid)-B-Poly(2-Hydroxyethyl Methacrylate) Amphiphilic Triblock Copolymer

Self-assembled pH-responsive MPEG-b-(PLA-co-PAE) block copolymer micelles for anticancer drug delivery

Hydrophilic Poly(Glutamic Acid)-Based Nanodrug Delivery System: Structural Influence and Antitumor Efficacy

Synthesis and self-assembly of amphiphilic diblock polycarbonates with various pendant hydrophilic groups

Synthesis and Characterization of Amphiphilic Block Copolymer of Poly (ethylene glycol)-Poly (β-benzyl-L-aspartic)

Biocompatible propylene glycol alginate-g-polytetrahydrofuran amphiphilic graft copolymers for highly effective drug carriers

Self-Assembled Polyprodrug Amphiphile for Subcutaneous Xenograft Tumor Inhibition with Prolonged Acting Time In Vivo.

Dual-Responsive Polymer Vesicles Capable of Co-loading Two Antitumor Drugs

Preparation and Characterization of Polymeric Micelles from Poly(D, L-lactide) and Methoxypolyethylene Glycol Block Copolymers as Potential Drug Carriers

Abc Block Copolymer As "smart" Ph-Responsive Carrier for Intracellular Delivery of Hydrophobic Drugs