Abstract:Vision-based sensors such as LiDAR (Light Detection and Ranging) are adopted in the SLAM (Simultaneous Localization and Mapping) system. In the 16-beam LiDAR aided SLAM system, due to the difficulty of object detection by sparse laser data, neither the grid-based nor feature point-based solution can avoid the interference of moving objects. In an urban environment, the pole-like objects are common, invariant and have distinguishing characteristics. Therefore, it is suitable to bring more robust and reliable positioning results as auxiliary information in the process of vehicle positioning and navigation. In this work, we proposed a scheme of a SLAM system using a GNSS (Global Navigation Satellite System), IMU (Inertial Measurement Unit) and LiDAR sensor using the position of pole-like objects as the features for SLAM. The scheme combines a traditional preprocessing method and a small scale artificial neural network to extract the pole-like objects in environment. Firstly, the threshold-based method is used to extract the pole-like object candidates from the point cloud, and then, the neural network is applied for training and inference to obtain pole-like objects. The result shows that the accuracy and recall rate are sufficient to provide stable observation for the following SLAM process. After extracting the poles from the LiDAR point cloud, their coordinates are added to the feature map, and the nonlinear optimization of the front end is carried out by utilizing the distance constraints corresponding to the pole coordinates; then, the heading angle and horizontal plane translation are estimated. The ground feature points are used to enhance the elevation, pitch and roll angle accuracy. The performance of the proposed navigation system is evaluated through field experiments by checking the position drift and attitude errors during multiple two-min mimic GNSS outages without additional IMU motion constrain such as NHC (Nonholonomic Constrain). The experimental results show that the performance of the proposed scheme is superior to that of the conventional feature point grid-based SLAM with the same back end, especially in congested crossroads where slow-moving vehicles are surrounded and pole-like objects are rich in the environment. The mean plane position error during two-min GNSS outages was reduced by 38.5%, and the root mean square error was reduced by 35.3%. Therefore, the proposed pole-like feature-based GNSS/IMU/LiDAR SLAM system can fuse condensed information from those sensors effectively to mitigate positioning and orientation errors, even in a short-time GNSS denied environment.

Attempt of UAV oblique images and MLS point clouds for 4D modelling of roadside pole-like objects

Supervoxel-based Extraction and Classification of Pole-Like Objects from MLS Point Cloud Data

Inventory Of 3d Street Lighting Poles Using Mobile Laser Scanning Point Clouds

Automatic Recognition of Pole-Like Objects from Mobile Laser Scanning Point Clouds

A Linear Feature-Based Approach For The Registration Of Unmanned Aerial Vehicle Remotely-Sensed Images And Airborne Lidar Data

Voxel-Based Extraction and Classification of 3-D Pole-Like Objects From Mobile LiDAR Point Cloud Data

Novel Framework for 3D Road Extraction Based on Airborne LiDAR and High-Resolution Remote Sensing Imagery

Pole-like Objects Mapping and Long-Term Robot Localization in Dynamic Urban Scenarios

Automatic Registration of Point Cloud and Panoramic Images in Urban Scenes Based on Pole Matching

Semiautomated Extraction of Street Light Poles From Mobile LiDAR Point-Clouds

Study on Typical Objects Three-Dimensional Modeling and Classification Technology Based on UAV Image Sequence

Pole-Like Object Extraction and Pole-Aided GNSS/IMU/LiDAR-SLAM System in Urban Area

Online Pole Segmentation on Range Images for Long-Term LiDAR Localization in Urban Environments

JOINT PROCESSING OF UAV IMAGERY AND TERRESTRIAL MOBILE MAPPING SYSTEM DATA FOR VERY HIGH RESOLUTION CITY MODELING

DETECTION AND SEGMENTATION OF POLE-LIKE OBJECTS IN MOBILE LASER SCANNING POINT CLOUDS

Automated Extraction of Urban Road Facilities Using Mobile Laser Scanning Data

Poles Extraction Based LiDAR Localization for Autonomous Robot Systems

Turning Mobile Laser Scanning Points into 2D/3D On-Road Object Models: Current Status

Integration of mobile laser scanning data with uav imagery for very high resolution 3 d city modeling

Automated Object Extraction from MLS Data: A Survey

AI-supported Framework of Semi-Automatic Monoplotting for Monocular Oblique Visual Data Analysis