Abstract:With the development of large span and heavy load modern engineering, concrete-filled steel tubular truss and laced column structures appear constantly. The joints of these structures are mostly circular Concrete-Filled Steel Tubular (CFST) joints. In order to solve the problem of lacking of the research on the mechanical properties of CFST joints, three CFST T-joints and one Circular Hollow Section (CHS) T-joint which was used for comparing were tested under reversed cyclic axial loading, and three CFST T-joints and one CHS T-joint were tested under reversed cyclic in-plane bending loading. The failure modes and the ultimate load carrying capacities of CFST T-joints were concluded and the load-displacement hysteretic curves were also studied. The test results showed that the failure modes of CFST joints and CHS joints with the same geometry were completely different, the ultimate load carrying capacities of CFST joints were much higher than that of CHS joints, which shows that adopting a concrete-filled chord member is the most effective way to improve the strength of the unstiffened tubular joints when subjected to axial loading and in-plane bending, the energy dissipation mechanisms of CFST joints and CHS joints were completely different, but both CFST joints and CHS joints had excellent seismic performances. The energy analysis of CFST joints under differing loading conditions indicated that there was a significant distinction in terms of the energy dissipation mechanism. The axially loaded specimens dissipated energy mainly by plastic deformation of the brace, while the in-plane bending loaded specimens dissipated energy mainly by punching shear of the chord wall at the intersection area. This research can not only provide scientific basis for the design of CFST joints, but also effectively promote the application of CFST truss and laced column, and can promote the improvement and development of the design theory of concrete-filled steel structures.

Working Mechanism of OATSCB-CFST Joint

Experimental Study on Reduced I-beam to CFRST Column Joints under Cyclic Loading

Study Of Mechanical Performance Of Concrete-Filled Steel Tubular Joints

Experimental Study on Edge Cell Partially-Replaced Joint for I-beam to Multi-Celled CFST Walls under Cyclic Loading

Mechanism of Load Introduction and Transfer Within Steel-Encased CFST Members with Shear Connections

Mechanism of Load Introduction and Transfer Within Steel-Encased Concrete-Filled Steel Tube Connections

Research on Behavior of the Joint with Concrete-filled Steel Tubular Column Under Pre-load in Steel Tube

Experimental Study on Tensile Fracture Mechanism of Butt Joints in Multi-Celled CFST Walls

BEHAVIOR OF CFST-COLUMN TO STEEL-BEAM JOINTS IN THE SCENARIO OF COLUMN LOSS

FE modeling analysis of the joints with diagonal concrete filled steel tubular column and steel beam

Experimental study on co-working of inner and outer steel part in concrete-filled steel tube tower frame with inner stiffening parts under tension

Analysis of Influencing Factors on M-θ Skeleton Curves of ATCFSST-SCB Interior Joint

Internal Force Transfer Mechanism and Bearing Capacity of Vertical Stiffener Joints in CFDST Structures

Shear Bearing Capacity of Framework Joints of Steel-Reinforced Concrete-Filled Circular Steel Tube

Cyclic testing on prefabricated joints for steel beam to concrete-filled steel tubular column

Experimental and Numerical Investigation of Concrete-Filled Double-Skin Steel Tubular Column for Steel Beam Joints

Behavior and design of steel beam to multi-celled corrugated-plate CFST wall joints

FINITE ELEMENT ANALYSIS ON CONCRETE-ENCASED CFST COLUMN TO REINFORCED CONCRETE BEAM JOINTS

Effect of vertical stiffeners on the seismic performance of T‐shaped CFST column to steel beam joint

Cyclic behaviour of novel blind bolted joints with different stiffening elements

Seismic Performance of the Concrete-Encased CFST Column to RC Beam Joints: Analytical Study