Abstract:A new graphene oxide (GO)-derivative nanocomposite containing biological polymer (i.e. chitosan) was successfully fabricated and investigated for Pb (II) adsorption from aqueous solutions. The nanocomposite (NC) performance was evaluated under different conditions of adsorbent dose (1–18.51 mg), Pb (II) initial concentration (0.35–33.65 mg/L), pH (1.24–10.76), temperature (~ 28–52 °C), and time (~ 2.5–23 min). The process was modeled by the methods of CCD, ANFIS, and GRNN and optimized by the approaches of Derringer's desirability function (DF) and genetic algorithm (GA). Although all models indicated good predictions, ANFIS showed the best function (with R2 0.9998, RMSE 0.0026, MAE 0.0016, and AAD 0.0023) in modeling of Pb (II) adsorption by GO-Fe3O4-CS-EDTA NC. Moreover, GA resulted the following optimum conditions: adsorbent dose 9.50 mg, initial Pb (II) concentration 24.00 mg/L, pH 8.00, tempreature 49.32°C, and time 22.20 min in which 93.98% Pb (II) predicted to be removed. And a maximum adsorption capacity of 666.66 mg/g was calculated by the Langmuir model (R2 = 0.937) that was much higher than that of stated by using the recently developed adsorbents for Pb (II). The enthalpy changes (ΔH°) of −21.62 to −26.65, Gibbs free energy (ΔG°) of 15.90, and entropy changes (ΔS°) of 0.1259 revealed an endothermic and spontaneous nature of the process. The elimination of Pb (II) followed a pseudo second-order kinetic model (R2 = 0. 9437). The influence of co-existing ions on the adsorption of Pb (II) showed a negative significant effect (of 93% to 75%) only at high mixture concentration (> 10 mg/L).All in all, the high removal efficiency and adsorption capacity, selectivity, reusability (six times without significant breakthrough), and working in a normal pH value, make GO-Fe3O4-CS-EDTA NC as a potential adsorbent for in situ treatment of lead ions-containing aqueous solutions.

Facile Preparation of Lignosulfonate–Graphene Oxide–Polyaniline Ternary Nanocomposite As an Effective Adsorbent for Pb(II) Ions

Comprehensive Evaluation of Polyaniline-Doped Lignosulfonate in Adsorbing Dye and Heavy Metal Ions

Fe 3 O 4 /Graphene Oxide/Chitosan Nanocomposite: A Smart Nanosorbent for Lead(II) Ion Removal from Contaminated Water

Synthesis and Characterization of Amino-Grafted Attapulgite/graphene Oxide Nanocomposites and Their Adsorption for Pb(II) Removal

Facile self-assembly synthesis of titanate/Fe3O4 nanocomposites for the efficient removal of Pb2+ from aqueous systems

A lignin-based composite hydrogel for the removal of heavy metal ions from aqueous solution

In situ polymerization of magnetic graphene oxide-diaminopyridine composite for the effective adsorption of Pb(II) and application in battery industry wastewater treatment

Preparation of chitosan/lignosulfonate for effectively removing Pb(II) in water

Fabrication of Lignin-based Magnetic Adsorbent via Thiol-ene Click Reaction for the Effective Removal of Pb(II)

Polyaniline/reduced graphene oxide doping induced abundant active sites in enset fiber as an efficient adsorbent material for wastewater treatment

Preparation and adsorption study of polyvinyl alcohol-functionalized sodium alginate composite hydrogel for Pb(II) in aqueous solutions

Efficient and selective removal of Pb(ii) from aqueous solution by a thioether-functionalized lignin-based magnetic adsorbent

Adsorption of Pb(II) from Aqueous Solutions Using Nanocrystalline Cellulose/Sodium Alginate/K-Carrageenan Composite Hydrogel Beads

Facile fabrication of sodium carboxymethyl cellulose/reduced graphene oxide composite hydrogel and its application for Pb(II) removal

Fast and Highly Efficient Adsorption Removal of Toxic Pb(II) by a Reusable Porous Semi-IPN Hydrogel Based on Alginate and Poly(Vinyl Alcohol)

Graphene oxide/polydopamine modified montmorillonite/carboxymethyl chitosan composite aerogel for efficient removal of Pb 2+ , Cu 2+ , and Cd 2+ : Adsorption behavior, mechanism and DFT study

Sustainable triethylenetetramine modified sulfonated graphene oxide/chitosan composite for enhanced adsorption of Pb(II), Cd(II), and Ni(II) ions

Removal of Pb(II) by lignin-sodium alginate composite in a fixed-bed column

A biological-based adsorbent for a non-biodegradable pollutant: Modeling and optimization of Pb (II) remediation using GO-CS-Fe3O4-EDTA nanocomposite

Porous boron nitride nanofibers enhanced sodium acrylate and acrylamide copolymer hydrogels for effective adsorption of Pb2+

Efficient Adsorption of Cu(II), Pb(II) and Ni(II) from Waste Water by PANI@APTS-magnetic Attapulgite Composites