Abstract:TiC ceramics have become one of the most potential ultra-high temperature structural materials, because of its high melting point, low density, and low price. However, the poor mechanical properties seriously limit its development and application. In this work, this review follows PRISMA standards, the mechanism of the second phase (particles, whiskers, and carbon nanotubes) reinforced TiC ceramics was reviewed. In addition, the effects of the second phase on the microstructure, phase composition and mechanical properties of TiC ceramics were systematically studied. The addition of carbon black effectively eliminates the residual TiO2 in the matrix, and the bending strength of the matrix is effectively improved by the strengthening bond formed between TiC; SiC particles effectively inhibit the grain growth through pinning, the obvious crack deflection phenomenon is found in the micrograph; The smaller grain size of WC plays a dispersion strengthening role in the matrix and makes the matrix uniformly refined, and the addition of WC forms (Ti, W) C solid solution, WC has a solid solution strengthening effect on the matrix; SiC whiskers effectively improve the fracture toughness of the matrix through bridging and pulling out, the microscopic diagram and mechanism diagram of SiC whisker action process are shown in this paper. The effect of new material carbon nanotubes on the matrix is also discussed; the bridging effect of CNTs can effectively improve the strength of the matrix, during sintering, some CNTs were partially expanded into GNR, in the process of crack bridging and propagation, more fracture energy is consumed by flake GNR. Finally, the existing problems of TiC-based composites are pointed out, and the future development direction is prospected.

High-performance ceramics III : proceedings of the 3rd International Conference on High-Performance Ceramics (CICC-3) : Incorporating the first International Workshop on Layered and Graded Materials, Shenzhen, China May 9-12, 2004

High-performance ceramics conference

The Progress of Research on Advanced Structural Ceramics

MRS International Materials Research Conference (IMRC-2008)

Application and Research Progress of LTCC Materials

Biotechnology, Chemical and Materials Engineering II

Extraordinary High-Temperature Mechanical Properties in Binder-Free Nanopolycrystalline WC Ceramic

New Progress of Ceramic-Based Functionally Graded Plasma-Facing Materials in China

Microstructure and Mechanical Properties of Carbide Reinforced TiC-Based Ultra-High Temperature Ceramics: A Review

Progress in densification and toughening of high entropy carbide ceramics

Structure design influencing the mechanical performance of 3D printing porous ceramics

Recent Progress in Preparation and Application of Porous Ceramics

Introduction to ChinaNANO 2013

RESEARCH PROGRESS OF NEW COLLOIDAL FORMING PROCESSES FOR ADVANCED CERAMICS

Recent advances in joining of SiC-based materials (monolithic SiC and SiCf/SiC composites): Joining processes, joint strength, and interfacial behavior

Developing Cemented Carbides Through ICME

Strategic Thinking on the Development of Electronic Ceramic Technology in China

Some Functional Ceramic Materials and Related Components for Green ICTs

Recent Advances in Multi-Material 3D Printing of Functional Ceramic Devices

Study on mechanical properties and thermal conductivity of 3D short carbon fiber reinforced ultra-high temperature ceramic matrix composites: A novel material performance evaluation model

Synthesis, Microstructure and Properties of High-Strength Porous Ceramics