Abstract:Lithium sulfur (Li-S) batteries have been intensively concerned in recent years as next generation Li batteries1. Compared with state-of-the-art Li-ion batteries, Li-S batteries own ultrahigh theoretical capacity and energy density, which are considered as most promising candidates applied to electric vehicles and hybrid electric vehicles. However, insulation of sulfur and dissolution of polysulfides are two main issues in sulfur cathodes which hinder the cycle life and application safety of Li-S batteries. To overcome these issues, developing conductive hosts and coating materials are prevailing approaches to improve the performance of Li-S batteries. Herein, we report molecular layer deposited (MLD) alucone coating and nanoscale metal organic framework derived carbon (MOF-C) confined sulfur cathodes in Li-S batteries. Surface coating with carbon or metal oxides has been proven to be a promising approach towards mitigating the shuttle effect in Li-S batteries. An ideal coating material should both cover on based material completely to prevent sulfur migration and also allow Li-ions and electrons transferring through smoothly. Based on these requirements, atomic and molecular layer deposition (ALD and MLD) are ideal technique to synthesize ultrathin and conformal coatings due to the self-limiting nature2 , 3. For the first time, we demonstrate that an MLD alucone coating directly on sulfur electrodes can dramatically improve the cycling stability and capability of Li-S cells. Furthermore, the alucone coated sulfur cathode delivers a discharge capacity of 710 mAh g-1, which is over two times higher than the bare sulfur cathode after 100 cycles4. The alucone coating demonstrated long durability during cell cycling, which explores a new direction in the protection of sulfur cathodes. Porous structured materials are prevailing in sulfur cathode to confine sulfur molecule in host materials. Herein, we developed a new carbon family, metal organic framework derived carbon materials (MOF-Cs) with tunable porous structure via in-situ ammonia treatment5. The ammonia treated MOF-C as carbon host shows an impressive improvement on sulfur cathodes, which performed twice higher discharge capacity retention than that of the pristine MOF-C. This research sheds light to design MOF-C materials with controlled nanostructure not only for Li–S batteries, but also for expanded applications in different energy storage systems. References 1 Bruce, P. G., Freunberger, S. A., Hardwick, L. J. & Tarascon, J. M. Li-O2 and Li-S batteries with high energy storage. Nature materials11, 19-29, (2012). 2 Meng, X., Yang, X. Q. & Sun, X. Emerging applications of atomic layer deposition for lithium-ion battery studies. Adv Mater24, 3589-3615, (2012). 3 Li, X. et al. Atomic layer deposition of solid-state electrolyte coated cathode materials with superior high-voltage cycling behavior for lithium ion battery application. Energy & Environmental Science7, 768, (2014). 4 Li, X., Lushington, A., Liu, J., Li, R. & Sun, X. Superior stable sulfur cathodes of Li-S batteries enabled by molecular layer deposition. Chem Commun (Camb)50, 9757-9760, (2014). 5 Li, X. et al. Tunable porous structure of metal organic framework derived carbon and the application in lithium–sulfur batteries. J Power Sources 302, 174-179, (2016). Figure 1

Strong Surface‐Bound Sulfur in Conductive MoO2 Matrix for Enhancing Li–S Battery Performance

Strong Sulfur Binding with Conducting Magnéli-phase Ti(n)O2(n-1) Nanomaterials for Improving Lithium-Sulfur Batteries.

Multifunctional ultrasmall-MoS<sub>2</sub>/graphene composites for high sulfur loading Li-S batteries

Sulfur-functionalized mesoporous carbons as sulfur hosts in Li-S batteries: increasing the affinity of polysulfide intermediates to enhance performance

Facile Synthesis of Heterostructured MoS 2 –MoO 3 Nanosheets with Active Electrocatalytic Sites for High-Performance Lithium–Sulfur Batteries

In situ enhance lithium polysulfides redox kinetics by carbon cloth/MoO3 self-standing electrode for lithium–sulfur battery

Embedding Sulfur in MOF-derived Microporous Carbon Polyhedrons for Lithium-Sulfur Batteries.

Molecular Scale Coating and Nanoscale Carbon Cage Confined Sulfur Cathodes Applied in Lithium Sulfur Batteries

Self-supported MoO2/MoS2 Nano-Sheets Embedded in a Carbon Cloth As a Binder-Free Substrate for High-Energy Lithium–sulfur Batteries

Balancing surface adsorption and diffusion of lithium-polysulfides on nonconductive oxides for lithium–sulfur battery design

Mixed-Metal-Organic Framework with Effective Lewis Acidic Sites for Sulfur Confinement in High-Performance Lithium-Sulfur Batteries

Tunable MOFs derivatives for stable and fast sulfur electrodes in Li-S batteries

Stable Lithium Sulfur Battery Based on In Situ Electrocatalytically Formed Li 2 S on Metallic MoS 2 –Carbon Cloth Support

Conductive Metal Organic Framework as Trapping Cathode Additive for High Performance Lithium-Sulfur Batteries

Sub-nanometric Manganous Oxide Clusters in Nitrogen Doped Mesoporous Carbon Nanosheets for High-Performance Lithium–Sulfur Batteries

Manipulating Redox Kinetics of Sulfur Species Using Mott–Schottky Electrocatalysts for Advanced Lithium–Sulfur Batteries

Integrating Sub‐Nano Catalysts into Metal‐Organic Framework toward Pore‐Confined Polysulfides Conversion in Lithium‐Sulfur Batteries

Crystalline molybdenum carbide−amorphous molybdenum oxide heterostructures: In situ surface reconfiguration and electronic states modulation for Li−S batteries

Metal–Organic Aerogel Assisted Reduced Graphene Oxide Coated Sulfur as a Cathode Material for Lithium Sulfur Batteries

In Situ‐Constructed LixMoS2 with Highly Exposed Interface Boosting High‐Loading and Long‐Life Cathode for All‐Solid‐State Li–S Batteries

Manipulating Sulfur Mobility Enables Advanced Li-S Batteries