Abstract:The turbomachinery cascades design is a typical high dimensional computationally expensive and black box problem, thus a metamodel-based design optimization and data mining method is proposed and programed in this work, which is intended to gain knowledge of design space except for optimal solutions. The method combines a Kriging-based global algorithm with data mining techniques of self-organizing map (SOM), analysis of variance (ANOVA), and parallel axis. NACA Rotor 37, a typical axial transonic rotor blade, is selected for the research. Through SOM analysis, the overall changing trend of performance indicators like isentropic efficiency, total pressure ratio, and so on for the rotor blade is nearly consistent; therefore, a single-objective design for maximizing isentropic efficiency of the rotor blade with constraints prescribed on total pressure ratio and mass flow rate is carried out. The computational fluid dynamics (CFD) evaluations needed for the Kriging-based optimization process amount to only 1/5 of that required when employing a modified differential evolution (DE) algorithm as the optimizer. The isentropic efficiency of related optimal solution is 1.74% higher than the reference design. Then, the interactions among design variables and critical performance indicators as well as common features of better solutions are analyzed via ANOVA and parallel axis. Particularly, an ANOVA-based optimization is tried, which can validate the detected significant variables and gain knowledge of subspace with minimum cost. By integrating data mining results with practical knowledge of aerodynamics, it is confirmed that the shock wave has the most significant influence on the aerodynamic performance of transonic rotor blades. The sweep in tip section is found to be responsible for slight tradeoff relation between isentropic efficiency and total pressure ratio. The combinations of forward lean, thinner section profile near the blade leading edge, and compound sweep are favorable to get better aerodynamic performance, which is validated by the configuration of optimal solution obtained by MBGO algorithm.

Aerodynamic Analysis And Multi-Objective Optimization Design Of A High Pressure Ratio Centrifugal Impeller

Multi-Objective Aerodynamic Optimization Design and Data Mining of a High Pressure Ratio Centrifugal Impeller

Aero-mechanical multidisciplinary optimization of a high speed centrifugal impeller

Aero-Mechanical Multidisciplinary Optimization and Knowledge Discovery of High Pressure Ratio Centrifugal Impeller

Multi-Objective Design Optimization of a Transonic Compressor Rotor Using an Adjoint Equation Method

Optimization Design of Centrifugal Fan Impeller Based on Numerical Simulation.

Multi-objective Optimization Design of a Centrifugal Impeller Considering Both Aerodynamic Efficiency and Structural Machinability

Multiobjective Optimization Approach to Turbomachinery Blades Design

Two Schemes Of Multi-Objective Aerodynamic Optimization For Centrifugal Impeller Using Response Surface Model And Genetic Algorithm

Multi-objective optimization design of a centrifugal impeller by positioning splitters using GMDH, NSGA-III and entropy weight-TOPSIS

Multi-Objective Automatic Optimization Design of Centrifugal Impeller Based on Genetic Algorithm

Multi-Objective Automated Optimization of Centrifugal Impeller Using Genetic Algorithm

Optimization of a Centrifugal Impeller with the Constraint on Efficiency at the Stall Point

Performance improvement of a transonic centrifugal compressor impeller with splitter blade by three-dimensional optimization

Multi-parameter Optimization Design, Numerical Simulation and Performance Test of Mixed-Flow Pump Impeller

Multi-Objective Aerodynamic Design Optimization Based On Camber Line And Thickness Distribution For A Transonic Compressor Rotor

Hybrid Aerodynamic Optimization of a Propeller Based on the Reformulated Blade Element Momentum Theory

Multiobjective Optimization Approach To Multidisciplinary Design Of A Three-Dimensional Transonic Compressor Blade

Multi-objective Optimization of a Mixed-Flow Pump Impeller Using Modified NSGA-II Algorithm

Research on Meta-Model Based Global Design Optimization and Data Mining Methods

A High-Dimensional Design Optimisation Method for Centrifugal Impellers