Abstract:Despite great improvements in computing hardware and developments of new methodologies for solving partial differential equations (PDEs), solving PDEs numerically can still be computationally prohibitive for certain applications. This computational difficulty is especially true when the solution of PDEs is tied to characterization, control, design, or other inverse problems in general. Most of the traditional PDE solution strategies, such as the Finite Element Method or Finite Volume Method can require hundreds of thousands of degrees of freedom to accurately capture the behavior of even relatively simple physical system. The computational cost is several orders of magnitude higher for solving optimization problems (a common approach to solve inverse problems), which require obtaining several solution fields. Hence, model order reduction is necessary to enable the solution of such optimization problems with sufficient efficiency to allow practical applicability. Several approaches have been developed to create accurate reduced-order models (ROMs) of physical systems with dramatically reduced computational expense. Yet, several questions remain as to the optimal approach to create ROMs for a given physical system to ensure suitable accuracy, and even more so in relation to inverse problem applications. The objective of the present work is to address issues relating to the creation of suitably accurate ROMs that can be utilized for the solution of a variety of computational inverse mechanics problems. This work focuses on ROMs that utilize proper orthogonal decomposition (POD) to create a reduced-order basis for the PDE solution from a set of previously obtained potential solution fields (i.e., snapshots) of the system of interest. First, a generally applicable algorithm is presented to efficiently create accurate ROMs for use in solving inverse problems in material characterization (i.e., nondestructive evaluation). This algorithm is based upon a novel concept for maximizing the diversity of the system snapshots used to create the ROM. Results show that by maximizing the snapshot diversity, the accurate generalization of the resulting ROM is substantially improved, which then improves inverse problem solution capabilities. Then, a comprehensive study is presented of the capability of a set of different approaches for reduced-order modeling (all still using POD) to represent systems involving flow past bluff bodies. One of the relatively unexplored issues when creating ROMs for fluid flows is the accuracy with respect to changes in Reynolds (Re) number. The present work uses the generalized POD technique to create ROMs that are capable of predicting flow field not only at different time levels, but also at different Re numbers. Finally, the ROM strategies explored for fluid flow were extended to investigate the applicability to optimal flow control problems. The ROM of flow was used along with an optimization technique and adjoint method for gradient calculation to solve a control problem to reduce the drag force in flow past one or more cylinders. Results of the solution of this optimal control problem show that the developed ROMs are capable of solving complex optimization problems with significantly reduced computational expense.

Feedback Stabilization of an Oscillating Vertical Cylinder by Pod Reduced-Order Model

Reduced-Order Model for Unsteady Compressible Flow Based on POD-Galerkin Projection

POD-based Reduced Order Optimal Control of Parabolic PDE Systems Via Diffusivity-Interior-boundary Actuation

Stabilized POD Reduced Order Models for convection-dominated incompressible flows

A Simple Proper Orthogonal Decomposition Method for Von Karman Plate Undergoing Supersonic Flow

Aero-Elastic Active Control Modeling Via Improved POD Method

Wake Stabilization Using POD Galerkin Models with Interpolated Modes

Pod-Galerkin Reduced Order Methods for CFD Using Finite Volume Discretisation: Vortex Shedding Around a Circular Cylinder

Numerical Analysis of a Projection-Based Stabilized POD-ROM for Incompressible Flows

Unsteady Aerodynamic Modeling Based on Pod-Observer Method

Aerodynamic System Modeling Based on Proper Orthogonal Decomposition

GLOBAL FLOW STABILITY ANALYSIS AND REDUCED ORDER MODELING FOR BLUFF-BODY FLOW CONTROL

Reduced-Order Modeling Toward Solving Inverse Problems in Solid Mechanics and Fluid Dynamics

Proper Orthogonal Decomposition Reduced-Order Model for Nonlinear Aeroelastic Oscillations

Projection-free Proper Orthogonal Decomposition Method for a Cantilever Plate in Supersonic Flow

Researching Method of Building Flow Field of Initial Development Stage of Low Reynolds Number Flow past a Circular Cylinder

Rotationary Feedback Control of the Cylinder Wake Flow Using a Linear Dynamic Model

Global Stability Analysis - a Key Enabler in Reduced Order Models and Flow Control

Limit Cycle Oscillation Prediction And Control Design Method For Aeroelastic System Based On New Nonlinear Reduced Order Model

A POD-Galerkin Reduced-Order Model for Two-Dimensional Rayleigh-Bénard Convection with Viscoelastic Fluid

On the Need for A Nonlinear Subscale Turbulence Term in Pod Models As Exemplified for A High-Reynolds-Number Flow over an Ahmed Body