Abstract:The stability and reliability of electricity grids requires a continuous balance between energy supply and demand. Renewable generation, such as solar and wind, is intermittent, which causes sudden and unanticipated changes to power output and contributes to electricity grid instability. The aqueous lithium-ion battery (LIB) or sodium-ion battery (SIB) may solve both the safety problem associated with lithium-ion batteries that use highly toxic and flammable organic solvents, and the poor cycling life associated with commercialized aqueous rechargeable batteries including lead-acid and nickel-metal hydride systems. Aqueous LIB and SIB have been demonstrated to be one of the most promising stationary power sources for the sustainable energy such as wind and solar power. As early as in 2005, we developed a new concept hybrid electrochemical supercapacitor in which a Li-ion intercalated compound was used as a positive electrode in combination with an activated carbon negative electrode in a Li2SO4 aqueous electrolyte (ZL. 200510025269.6). The negative electrode stores charge through a reversible nonfaradaic reaction of Li-ion on the surface of an activated carbon. The positive electrode utilizes a reversible faradic reaction of Li-ion insertion/extraction in the lithium-ion intercalated compounds. A hybrid cell consisting of a spinel LiMn2O4 positive and an AC negative electrode shows excellent reversibility with a sloping voltage profile from 0.8 to 1.8 V at an average voltage near 1.3 V, and delivers an 8 Wh/kg of 60000 F practical cell. In order to improve the specific energy, we employed LiTi2(PO4)3, but the cell shows poorer cycling stability compared with the pure AC anode. We analyzed the stability of electrode materials in aqueous electrolytes extensively. We found that, in the presence of oxygen, the discharged state of lithium-ion intercalated compounds (LIC) of all negative electrode materials suitable for aqueous lithium-ion batteries reacts with water and O2, with no dependence on the pH value of the electrolyte, which is mainly responsible for the capacity fading of aqueous lithium-ion batteries during charge/discharge cycling. By eliminating the O2 (using a sealed cell), adjusting the pH values of the electrolyte, and using carbon-coated electrode materials; the LIB shows much cycling stability. A commercialized hybrid LIB shows a specific energy of ca. 30 Wh/kg, and exhibits a good cycling stability over 3500 cycles. References: Xia et al., TiP2O7 and Expanded Graphite Nanocomposite as Anode Material for Aqueous Lithium-Ion Batteries. ACS Appl. Mater. Interfaces, 9, 8075-8082 (2017). Xia et al., Environmentally-friendly aqueous Li (or Na)-ion battery with fast electrode kinetics and super-long life, Adv. , 2: e1501038 (2016). Xia et al., Raising the Cycling Stability of Aqueous Lithium-Ion Batteries by Eliminating O2 in the Electrolyte ”, Nat . Chem . , 2, 760-765 (2010). Xia et al., Hybrid aqueous energy storage cells using activated carbon and lithium-intercalated compounds I. The C/LiMn2O4 system, Electrochem. Soc. , 153(2): A450-A454 (2006).

Recent Progress in Aqueous Lithium-Ion Batteries

Intercalated Water and Organic Molecules for Electrode Materials of Rechargeable Batteries

An Overview of Aqueous Lithium-Ion Batteries

The Development in Aqueous Lithium-Ion Batteries

(Battery Division Technology Award) Aqueous Li(Na) –ion Batteries As Potential Stationary Power

Applications and Recycling of Lithium-ion Batteries

Advanced Aqueous Batteries: Status and Challenges

Recent Advances in Energy Chemical Engineering of Next-Generation Lithium Batteries

Recent advances of aqueous rechargeable lithium / sodium ion batteries: Key electrode materials and electrolyte design strategies

A lithium ion battery using an aqueous electrolyte solution

Building Smarter Aqueous Batteries

A Perspective on Sustainable Energy Materials for Lithium Batteries

Recent Advances in Aqueous Zinc-Ion Batteries

A Review of Nonaqueous Electrolytes, Binders, and Separators for Lithium-Ion Batteries

Recent advances in LiV3O8 as anode material for aqueous lithium-ion batteries: Syntheses, modifications, and perspectives

Sustainable Recycling Technology for Li-Ion Batteries and Beyond: Challenges and Future Prospects

Recent progress in carbonyl-based organic polymers as promising electrode materials for lithium-ion batteries (LIBs)

Progress in Aqueous Rechargeable Sodium‐Ion Batteries

Progress, Key Issues, and Future Prospects for Li‐Ion Battery Recycling

Improved Electrochemical Properties of Aqueous Lithium-Ion Batteries Via the Optimization of Gel Polymer Electrolytes

Sustainable Electric Vehicle Batteries for a Sustainable World: Perspectives on Battery Cathodes, Environment, Supply Chain, Manufacturing, Life Cycle, and Policy