Abstract:Due to the increasing demand for lightweight structures with complex geometries, additively manufactured (AM) aluminum–silicon (AlSi) alloys have aroused considerable attention. However, their insufficient hardness and poor tribological performance remain a critical issue for several applications requiring high contact pressures and wear resistance. Herein, current-controlled plasma electrolytic oxidation (PEO) coatings were developed on AM AlSi alloys in alkali electrolytes. To obtain PEO coatings with excellent mechanical properties, the electrolyte system was modulated and optimized by adjusting the concentration of the silicate and hexametaphosphate. The corrosion behavior of AM AlSi alloys in various electrolytes were evaluated via potentiodynamic polarization tests. The influence of silicate and hexametaphosphate on the structure, composition, thickness, roughness, and hardness of the prepared PEO coatings were determined using scanning electron microscopy, X-ray diffraction, energy-dispersive X-ray spectroscopy system, microprofilometer, and microhardness tester. The tribological behavior of the PEO coatings were tested using a ball-disc-tribometer without lubrication. Silicate benefits the PEO process under the constant current mode; however, a mass of mullite and noncrystalline materials form. Hexametaphosphate adversely affects the formation of the initial passive film on AM AlSi alloys, and many defects form on the obtained coating. But it can decrease the roughness of the coating and accelerate the dissolution of the matrix, promoting the formation of alumina and inhibiting the formation of mullite and SiO2. The PEO coatings, prepared in the mixed electrolytes (with a concentration ratio of silicate and hexametaphosphate of ~0.7–1), have the fewest defects and highest hardness (~1300 HV), and possess superior tribological performance; the wear rates of the coatings were only ~1/150th that of the AM AlSi10Mg substrate. Both the synergy of silicate and hexametaphosphate and the modified growth mechanisms of PEO coatings on AM AlSi alloys have been proposed.

Plasma Electrolytic Oxidation Treatment Of Aluminium And Titanium Alloys

Plasma electrolytic oxidation (PEO) as surface treatment for high strength Al alloys produced by L-PBF: Microstructure, performance, and effect of substrate surface roughness

Plasma electrolytic oxidation technology for producing protective coatings of aluminum alloys

Phosphate Porous Coatings Enriched with Selected Elements via PEO Treatment on Titanium and Its Alloys: A Review

Effect of plasma-electrolytic oxidation on mechanical properties of titanium coatings

Behaviors of Micro-Arcs, Bubbles, and Coating Growth during Plasma Electrolytic Oxidation of β-Titanium Alloy

Plasma Electrolytic Oxidation (PEO) as a Promising Technology for the Development of High-Performance Coatings on Cast Al-Si Alloys: A Review

GDOES, XPS, and SEM with EDS analysis of porous coatings obtained on titanium after plasma electrolytic oxidation

Electrochemical Surface Treatment for Tailored Porous Structures

Study on Galvanic Corrosion Behavior of AH36 Steel and TC4 Alloy Processed by Plasma Electrolytic Oxidation

The effect of plasma electrolytic oxidation of aluminum alloys on the structure and properties of protective oxide-ceramic coatings

Effect of Treatment Temperature on Titania Coating Microstructures and Corrosion Properties by Hybrid Plasma Electrolytic Oxidation Treatment

Surface Modification of Aluminum 6061-O Alloy by Plasma Electrolytic Oxidation to Improve Corrosion Resistance Properties

A Review on the Plasma Electrolytic Oxidation (PEO) Process Applied to Copper and Brass

A Mechanism for the Growth of a Plasma Electrolytic Oxide Coating on Al

Plasma electrolytic oxidation coatings on additively manufactured aluminum–silicon alloys with superior tribological performance

Plasma electrolytic oxidation coatings on mechanically cold-worked titanium in solution containing hydroxyapatite ions

Wear and Corrosion Resistance of Plasma Electrolytic Oxidation Coatings on 6061 Al Alloy in Electrolytes with Aluminate and Phosphate

Growth mechanisms for initial stages of plasma electrolytic oxidation coating on Al

Influence of Process Parameters on the Tribological Behavior of PEO Coatings on CP-Titanium 4+ Alloys for Biomedical Applications

Characterisation and Oxidation Behaviour of Plasma Surface Alloyed on Γ-Tial Alloy