Ultra-compact Broadband TM-pass Polarizer Using a Silicon Hybrid Plasmonic Waveguide Grating

Xiaowei Guan,Peipeng Xu,Yaocheng Shi,Daoxin Dai

DOI: https://doi.org/10.1364/acp.2013.ath4a.2

2013-01-01

Abstract:An ultra-compact TM-pass polarizer with a footprint of 0.55 × 3.9 μm2 is demonstrated utilizing a grating with a hybrid plasmonic waveguide. The polarizer has a band > 100 nm for 12 dB extinction ratio.

What problem does this paper attempt to address?

Ultra-Compact and Ultra-Broadband Te-Pass Polarizer with A Silicon Hybrid Plasmonic Waveguide

Xiaowei Guan,Peipeng Xu,Yaocheng Shi,Daoxin Dai

DOI: https://doi.org/10.1117/12.2039798

2014-01-01

Abstract:An ultra-compact TE-pass polarizer with an ultra-broad band is proposed theoretically and demonstrated experimentally by utilizing a silicon hybrid plasmonic waveguide. The metal layer of the silicon hybrid plasmonic waveguide is designed to have an F-P cavity as well as a Bragg grating so that the TM-polarized light is reflected efficiently while the TE-polarized light goes through with very low loss. By utilizing the present structure with a metal Bragg grating, the designed TE-pass polarizer is with a size of as small as 0.5 × 3.1 μμm2 and the theoretical extinction ratio is as high as 15 dB over a broad band of >200 nm.
Ultracompact TE-Pass Polarizer Based on a Hybrid Plasmonic Waveguide

Zhoufeng Ying,Guanghui Wang,Xuping Zhang,Ying Huang

DOI: https://doi.org/10.1109/LPT.2014.2365029

2015-01-01

Abstract:An ultracompact and broadband TE-pass polarizer based on a hybrid plasmonic waveguide is proposed on the silicon-on-insulator platform. The optimized design has an active region as small as 0.8 μm, which is the shortest polarizer reported until now, and exhibits high polarization-dependent transmission imposing a TM mode cutoff while leaving the TE mode almost unaffected. Finite-difference time-domain simulation reveals an insertion loss <;1 dB and an extinction ratio of 19 dB. The extinction ratio could be further improved to 25 dB over 300-nm bandwidth, with an insertion loss of 2.5 dB.
An Integrated Surface Plasmonic TE-Pass Polarizer on a Silica-on-Silicon Waveguide

Heliang Shen,Xuan She,Fei Huang,Wen Fan,Hongshuo Liu,Kan Chen,Ran Bi,Lei Wang,Xiaowu Shu

DOI: https://doi.org/10.1109/lpt.2024.3351698

IF: 2.6

2024-01-01

IEEE Photonics Technology Letters

Abstract:We report an integrated implementation of a surface plasmonic TE-pass polarizer on a silica-on-silicon waveguide. The effect of waveguide width and length on polarization extinction ratio (PER) were investigated. For a 10 mm device, PER in excess of 48 dB with TE mode loss of approximately 0.8 dB was recorded. In addition, we experimentally demonstrate a wavelength dependence of PER smaller than 3 dB with a width of 5.5- 6.5 mu m device over the C band from 1520-1580 nm. We also present a theoretical analysis and numerical simulation of this architecture that are in good agreement with each other and the experimental results. By improving the fabrication process and PER measurement method, over 60 dB PER and less 0.1 dB TE mode loss can be obtained for a 10 mm polarizer according to our model, which is expected to be widely applicated in sensors such as optical gyroscopes.
Low Loss, Compact Tm-Pass Polarizer Based on Hybrid Plasmonic Grating

Bowen Bai,Lu Liu,Ruixuan Chen,Zhiping Zhou

DOI: https://doi.org/10.1109/lpt.2017.2663439

IF: 2.6

2017-01-01

IEEE Photonics Technology Letters

Abstract:A low-loss, compact TM-pass polarizer is demonstrated based on hybrid plasmonic grating on silicon-on-insulator platform. Since the large mode distribution mismatch and plasmonic effect significantly influence the transmission and reflection spectrum of the device, the traditional theory of Bragg grating cannot fully explain this phenomenon. Here, we proposed an analysis method which takes effective index and mode overlap together into consideration to design this polarizer. A compact length of 2.5 mu m with extinction ratio over 25 dB is realized simultaneously. Moreover, the insertion loss is only 0.088 dB, which is comparable to dielectric-based devices.
Low-loss ultracompact transverse-magnetic-pass polarizer with a silicon subwavelength grating waveguide.

Xiaowei Guan,Pengxin Chen,Sitao Chen,Peipeng Xu,Yaocheng Shi,Daoxin Dai

DOI: https://doi.org/10.1364/OL.39.004514

IF: 3.6

2014-01-01

Optics Letters

Abstract:An ultracompact and low-loss TM-pass polarizer on silicon is proposed and demonstrated experimentally with a subwavelength-grating (SWG) waveguide. The SWG waveguide is designed to support Bloch mode for TM polarization so that the incident TM-polarized light goes through the SWG waveguide with very low excess loss. On the other hand, for TE polarization, the SWG waveguide works as a Bragg reflector, and consequently the incident TE-polarized light is reflected. For a fabricated similar to 9 mu m long polarizer (with the period number N = 20), the measured extinction ratio is similar to 27 dB and the excess loss is similar to 0.5 dB at the central wavelength 1550 nm. The bandwidth to achieve an extinction ratio of 20 dB is about 60 nm (from 1520 to 1580 nm). When increasing the period number to N = 40, the measured extinction ratio is up to 40 dB (which is not as high as the expected theoretical value 65 dB due to the limit of the measurement system). (C) 2014 Optical Society of America
Broadband Graphene/Glass Hybrid Waveguide Polarizer

Chongyang Pei,Longzhi Yang,Gencheng Wang,Yuehai Wang

DOI: https://doi.org/10.1109/LPT.2015.2398452

2015-01-01

Abstract:In this letter, a broadband planar-lightwave-circuit-type graphene/glass hybrid waveguide polarizer has been demonstrated. The polarizing effect of the polarizer is based on the difference in the attenuation between the two orthogonally polarized guided modes. The buried depth and the width of the ion-exchange glass waveguide are optimized to 2.6 and 11.5 μm, respectively. The polarization extinction ratio of the polarizer is ~27 dB in the telecommunication band with ~4-mm graphene coating length along the propagation direction. In addition, the polarization extinction ratio can be further increased by decreasing the chemical potential of the graphene film.
Ridge Waveguide Assisted Highly Efficient Transverse-Electric-pass Polarizer Based on a Hybrid Plasmonic Waveguide.

Haixia Zhu,Ran Hao,Erping Li

DOI: https://doi.org/10.1364/ao.57.005533

IF: 1.9

2018-01-01

Applied Optics

Abstract:An ultra-compact and low-loss transverse-electric (TE)-pass polarizer is proposed by utilizing a hybrid plasmonic ridge waveguide structure on a silicon-on-insulator platform. Since the transmission of a plasmonic polarizer is greatly influenced by the interaction between the metal and the optical field, there is a large insertion loss (IL) in the polarizer based on a hybrid plasmonic waveguide. Here, the electric field distribution and the periodic coupling between the fundamental transverse magnetic mode and plasmonic mode are taken into consideration to decrease the IL and shorten the length of the device. For a 4.2 mu m-long polarizer, numerical simulations with the finite-differential-time-domain method show that it has a large extinction ratio (ER) of similar to 29.5 dB with a low IL of 0.18 dB at the central wavelength 1550 nm. In addition, a more than 23 dB ER is achieved across a wide bandwidth of 100 nm. (C) 2018 Optical Society of America
An Ultra-Broadband Polarizing Beam Splitter/coupler Using Asymmetric-Waveguides

Qinghuan Xu,Jifang Tao,Chonglei Sun,Jia Zhao,Zuojia Wang,Liuge Du,Chuanning Niu,Xun Li,Weiping Huang

DOI: https://doi.org/10.1016/j.optcom.2019.124424

IF: 2.4

2020-01-01

Optics Communications

Abstract:A high-performance polarizing beam splitter (PBS) is demonstrated by using asymmetrical directional couplers on a 220nm-thick silicon-on-insulator (SOI) photonics platform. The extinction ratio of the PBS with cascaded directional couplers is > 35 dB for both TE and TM polarizations around the central wavelength of 1550 nm. The bandwidths for an extinction ratio of 20 dB and 30 dB are 275 nm and 230 nm, respectively, for TE polarization, as well as > 300 nm and 225 nm, respectively, for TM polarization. The insertion losses for TE polarization are < 0.5 dB with a bandwidth of > 300 nm. The insertion losses for TM polarization are < 1 dB and < 0.5 dB with a bandwidth of 218 nm and 174 nm, respectively.
Ultra-Compact and Low-Loss Polarization Rotator Based on Plasmonic Waveguide

Kang Hou,Tao Chu

DOI: https://doi.org/10.1109/icocn.2015.7203764

2015-01-01

Abstract:A novel ultra-compact polarization rotator (PR) based on surface plasmon polaritons waveguide is proposed. The total footprint of the proposed device is only 0.44μm × 2.55μm. Simulations with 3D-FDTD show that the PR has a broad bandwidth (1.4μm~1.7μm) with extinction ratios larger than 10dB. The insertion losses are less than 1dB during the wavelength range of 1450nm~1650nm.
Low-loss Hybrid Plasmonic TM-pass Polarizer Using Polarization-Dependent Mode Conversion

Ruixuan Chen,Bowen Bai,Zhiping Zhou

DOI: https://doi.org/10.1364/prj.392654

IF: 7.6

2020-01-01

Photonics Research

Abstract:A low-loss hybrid plasmonic transverse magnetic (TM)-pass polarizer has been demonstrated utilizing polarization-dependent mode conversion. Taking advantage of the silicon hybrid plasmonic slot waveguide (HPSW), the unwanted transverse electric (TE) fundamental mode can be efficiently converted first to a TM higher-order mode and then suppressed by a power combiner, while the retained TM fundamental mode can pass through with negligible influence. Since the HPSW feature both strong structural asymmetry and a small interaction area in the cross-section between the metal and optical field, the optimized insertion loss of the device is as low as 0.4 dB. At the wavelength of 1550 nm, the extinction ratio is 28.3 dB with a moderate footprint of 2.38 μm×10 μm. For the entire C band, the average reflection of the TE mode is suppressed below ?14 dB, and the extinction ratio is over 18.6 dB. This work provides another more efficient and effective approach for better on-chip polarizers.
Demonstration of an Ultra-Compact and Broadband TM-Pass Polarizer Using Nano-Elliptical Holes

Yaxin Yu,Zhenzhao Guo,Shengbao Wu,Jinbiao Xiao

DOI: https://doi.org/10.1109/lpt.2024.3368041

IF: 2.6

2024-03-13

IEEE Photonics Technology Letters

Abstract:An ultra-compact and large-bandwidth transversal magnetic (TM) polarizer is proposed and demonstrated. Low-loss propagation of TM modes is enabled by the creation of a bandgap using nano-elliptical holes, while transverse electric (TE) modes are effectively suppressed. Theoretical analysis results show that the proposed devices have a bandwidth (BW) over 305 nm (1394 nm~1699 nm) with a polarization extinction ratio (PER) above 20 dB and an insertion loss (IL) less than 1.0 dB. This wide BW covers the S-, C-, L- and U-bands, as well as part of the O-band, within a compact total device length of only . Experimental results show IL < 1.0 dB and PER more than 20 dB in a BW of 220 nm. To our knowledge, this is currently the most compact TM polarizer on the 220 nm SOI platform, measuring , while delivering the same level of performance.

engineering, electrical & electronic,optics,physics, applied
Low loss, wideband, and high extinction ratio TM polarizer based on subwavelength gratings

Haoyu Wu,Yaohui Sun,Yue Zhou,Mengjia Lu,Guohua Hu,Binfeng Yun,Yiping Cui

DOI: https://doi.org/10.1364/ao.520940

IF: 1.9

2024-04-06

Applied Optics

Abstract:Haoyu Wu, Yaohui Sun, Yue Zhou, Mengjia Lu, Guohua Hu, Binfeng Yun, Yiping Cui We propose a low loss, wideband silicon transverse magnetic (TM) polarizer with high polarization extinction ratio and low reflection based ... [Appl. Opt. 63, 2950-2956 (2024)]

optics
Design and Fabrication of a TE-pass Polarizer Based on Silicon Nitride Optical Waveguide

Siyang Zhou,Zhongwen Wang,Jian-Jun He

DOI: https://doi.org/10.1117/12.2656995

2022-01-01

Abstract:An on-chip TE-pass polarizer working near 850nm band is designed and fabricated on silicon nitride platform. The structure is very simple, using a straight silicon nitride waveguide separated from a metal strip by a low index silicon oxide spacer layer. By optimizing the thickness of the spacer layer, the metal strip introduces more loss for TM mode than TE mode. The measured extinction ratio of the fabricated device is around 20dB over a 16nm wavelength range from 837nm to 853nm for a 3mm-long polarizer.
Broadband and Compact TE-Pass Polarizer Based on Hybrid Plasmonic Grating on LNOI Platform

Shuangxing Dai,Wenqi Yu,Yiru Zhao,Mingxuan Li,Jinye Li,Zhike Zhang,Jianguo Liu

DOI: https://doi.org/10.1109/JPHOT.2020.3041286

IF: 2.4

2021-01-01

IEEE Photonics Journal

Abstract:A broadband and compact TE-pass/TM-stop polarizer is presented based on hybrid plasmonic grating (HPG) on an x-cut Lithium-Niobate-on-isolator (LNOI) platform. By comprehensively analyzing the effects of metal width on mode effective index, mode similarity, and mode conversion, we demonstrate the structure with a narrow metal layer. The simulation results indicate that the polarizer with a compact length of 9 mu m achieves an extinction ratio over 20 dB within the wavelength range from 1470 nm to 1700 nm. The insertion loss is below 2.3 dB in C-band. Furthermore, the polarizer exhibits large fabrication tolerance to current fabrication technology.
High-performance and ultra-wide bandwidth silicon TM polarizer with suppressed reflection utilizing a tailored contra-mode conversion Bragg grating

Shengbao Wu,Qianli Yu,Lei Zhang,Zhenzhao Guo,Jinbiao Xiao,Steve Yao

DOI: https://doi.org/10.1364/ol.537699

IF: 3.6

2024-08-31

Optics Letters

Abstract:Shengbao Wu, Qianli Yu, Lei Zhang, Zhenzhao Guo, Jinbiao Xiao, X. Steve Yao We present a compact TM polarizer with high polarization extinction ratio (PER), low loss, and suppressed reflection over an ultra-wide ... [Opt. Lett. 49, 4995-4998 (2024)]

optics
Fabrication Tolerant TE-pass Polarizer Based on Hybrid Plasmonic Bragg Grating

Bowen Bai,Xinbai Li,Zhiping Zhou

DOI: https://doi.org/10.1109/group4.2016.7739047

2016-01-01

Abstract:A TE-pass polarizer based on hybrid plasmonic Bragg grating for silicon-on-insulator platform is proposed. The structure greatly eases alignment tolerance compared with traditional plasmonic devices. An extinction ratio over 18 dB within bandwidth of 220 nm is achieved with compact length of 5.04 μm.
Compact transverse-magnetic-pass polarizer with a subwavelength grating based on a hybrid silicon-lithium niobate on insulator platform

Zhiwei Zheng,Xuan She,Xiwei Shen,Fei Huang,Hongshuo Liu,Xiaowu Shu,Kan Chen

DOI: https://doi.org/10.1117/1.oe.63.1.017106

IF: 1.3

2024-01-30

Optical Engineering

Abstract:In this work, a transverse magnetic (TM)-pass polarizer based on subwavelength grating (SWG) on the emerging potential hybrid silicon-LNOI platform is proposed. By integrating silicon material onto the LNOI platform, the optical power of TE0 and TM0 modes is judiciously distributed to distinct regions. This design not only effectively blocks the TE0 mode but also enables low-loss transmission of the TM0 mode, thereby achieving a balanced manipulation of both polarizations. Due to the strong reflection of TE0 mode by SWG, a polarizer is realized with a high polarization extinction ratio (PER) and low insertion loss (73 dB and 0.37 dB respectively at 1550 nm) in a compact size (device length is 23.38 μm). Moreover, the PER is beyond 50 dB and the insertion loss is under 0.46 dB in a broad wavelength range of 1525 to 1585 nm.

optics
Compact Polarization Splitter Based on Silicon Grating-Assisted Couplers

Huiye Qiu,Yuxia Su,Ping Yu,Ting Hu,Jianyi Yang,Xiaoqing Jiang

DOI: https://doi.org/10.1364/ol.40.001885

2015-01-01

Abstract:Compact polarization beam splitter (PBS) based on grating-assisted couplers is proposed by utilizing contra-directional coupling between two corrugated strip waveguides. The co-directional coupling in the device is greatly suppressed by the designed asymmetric structure. The phase matching condition is only satisfied for TE polarization at the central wavelength of 1550 nm by a spatially periodic refractive-index perturbation. Due to the contra-directional coupling, the device breaks the limit of the precise control of the coupling strength and length. The simulation results show that the presented PBS, with a coupling length of only 19 μm, has a broad working bandwidth (∼40 nm) for a crosstalk below -12 dB. A large fabrication tolerance (±40 nm) for the waveguide width is also achieved.
Broad Bandwidth and Large Fabrication Tolerance Polarization Beam Splitter Based on Multimode Anti-Symmetric Bragg Sidewall Gratings

Huiye Qiu,Jianfei Jiang,Ping Yu,Jianyi Yang,Hui Yu,Xiaoqing Jiang

DOI: https://doi.org/10.1364/ol.42.003912

2017-01-01

Abstract:A novel polarization beam splitter based on an anti-symmetric sidewall Bragg grating in a multimode silicon-on-insulator strip waveguide is demonstrated. Anti-symmetric spatially periodic refractive-index perturbations are designed for strong coupling between the fundamental (TE0) and the first-order transverse electric modes (TE1), while not for transfer magnetic modes. An adiabatic coupler is cascaded at the input-port, so as to drop the TE1 reflection. The Bragg grating has a compact length of ∼20 μm (55 periods). The polarization isolations of the through- and drop-ports at the wavelength of 1557 nm are 34 and 31 dB, respectively. A broad bandwidth of 64 nm and a large fabrication tolerance of 80 nm for polarization isolation over 20 dB are also achieved.
Demonstration of an on-chip TE-pass polarizer using a silicon hybrid plasmonic grating

Bowen Bai,Fenghe Yang,Zhiping Zhou

DOI: https://doi.org/10.1364/PRJ.7.000289

IF: 7.6

2019-01-01

Photonics Research

Abstract:An on-chip, high extinction ratio transverse electric (TE)-pass polarizer using a silicon hybrid plasmonic grating is proposed and experimentally demonstrated. Utilizing plasmonics to manipulate the effective index and mode distribution, the transverse magnetic mode is reflected and absorbed, while the TE mode passes through with relatively low propagation loss. For a 6-μm-long device, the measurement result shows that the extinction ratio in the wavelength range of 1.52 to 1.58 μm varies from 24 to 33.7 dB and the insertion loss is 2.8–4.9 dB. Moreover, the structure exhibits large alignment tolerance and is compatible with silicon-on-insulator fabrication technology. © 2019 Chinese Laser Press.

Ultra-compact Broadband TM-pass Polarizer Using a Silicon Hybrid Plasmonic Waveguide Grating

Ultra-Compact and Ultra-Broadband Te-Pass Polarizer with A Silicon Hybrid Plasmonic Waveguide

Ultracompact TE-Pass Polarizer Based on a Hybrid Plasmonic Waveguide

An Integrated Surface Plasmonic TE-Pass Polarizer on a Silica-on-Silicon Waveguide

Low Loss, Compact Tm-Pass Polarizer Based on Hybrid Plasmonic Grating

Low-loss ultracompact transverse-magnetic-pass polarizer with a silicon subwavelength grating waveguide.

Broadband Graphene/Glass Hybrid Waveguide Polarizer

Ridge Waveguide Assisted Highly Efficient Transverse-Electric-pass Polarizer Based on a Hybrid Plasmonic Waveguide.

An Ultra-Broadband Polarizing Beam Splitter/coupler Using Asymmetric-Waveguides

Ultra-Compact and Low-Loss Polarization Rotator Based on Plasmonic Waveguide

Low-loss Hybrid Plasmonic TM-pass Polarizer Using Polarization-Dependent Mode Conversion

Demonstration of an Ultra-Compact and Broadband TM-Pass Polarizer Using Nano-Elliptical Holes

Low loss, wideband, and high extinction ratio TM polarizer based on subwavelength gratings

Design and Fabrication of a TE-pass Polarizer Based on Silicon Nitride Optical Waveguide

Broadband and Compact TE-Pass Polarizer Based on Hybrid Plasmonic Grating on LNOI Platform

High-performance and ultra-wide bandwidth silicon TM polarizer with suppressed reflection utilizing a tailored contra-mode conversion Bragg grating

Fabrication Tolerant TE-pass Polarizer Based on Hybrid Plasmonic Bragg Grating

Compact transverse-magnetic-pass polarizer with a subwavelength grating based on a hybrid silicon-lithium niobate on insulator platform

Compact Polarization Splitter Based on Silicon Grating-Assisted Couplers

Broad Bandwidth and Large Fabrication Tolerance Polarization Beam Splitter Based on Multimode Anti-Symmetric Bragg Sidewall Gratings

Demonstration of an on-chip TE-pass polarizer using a silicon hybrid plasmonic grating