Abstract:In vessel retention (IVR) is one of the key severe accident mitigation strategies to maintain reactor pressure vessel (RPV) integrity. IVR designs utilize the reactor pressure vessel lower head to contain molten fuel and rely on external reactor vessel cooling (ERVC) to remove decay heat. The capacity of ERVC is limited by the critical heat flux (CHF) of flow boiling on the outside of the reactor vessel surface. Therefore, the determination of critical heat flux (CHF) is crucial to predict whether the adoption of IVR would be successful in mitigating severe accidents. In 1999, Celeta et.al proposed a superheated layer vapor replenishment model. In this model they postulated that CHF would occur when the superheated layer was occupied by the vapor blanket coming into contact with the heated wall and they successfully predicted the critical heat flux in subcooled water flow boiling under high mass flux, high liquid subcooling and low/medium pressure conditions. To evaluate the practicability of this model in predicting CHF under IVR conditions, CHF experiments were performed under natural circulation conditions on the experiment facility "Test of External Vessel Surface with Enhanced Cooling" (TESEC). Experiments are conducted in a 30 mm wide, 61mm high rectangular flow channel with a 200 mm long heated surface along the flow direction. Two quartz windows are installed at the sidewalls of the flow channel for visualization. In order to simulate various positions of the reactor lower head, experiments at different inclination angles of the test section were conducted. The high speed visualization data at CHF point at various inclination angles were processed and analyzed by a MATLAB code developed by the author. The vapor blanket thickness at various inclination angles was measured from the visualization data and was also predicted by the Celeta model. By using geometry data from high speed images, CHF values were calculated by Celeta model and compared with the experimental results at various inclination angles. Limitations of the Celeta model in adaptation of predicting CHF under IVR conditions were further discussed.

An Alternative Approach To Prediction Of Critical Heat Flux: Projection Support Vector Regression

Particle swarm optimization-based least squares support vector regression for critical heat flux prediction

Combination of Support Vector Regression and Artificial Neural Networks for Prediction of Critical Heat Flux

Prediction of critical heat flux for water flow in vertical round tubes using support vector regression model

Machine Learning Prediction of Critical Heat Flux on Downward Facing Surfaces

Prediction of CHF location through applied machine learning

Deep-Learning Strategy Based on Convolutional Neural Network for Wall Heat Flux Prediction

Heat Flux Prediction of Radiation Balance Wall by Deep Convolutional Neural Networks

Prediction of Critical Heat Flux by Using Artificial Neural Network

Applications of Genetic Neural Network for Prediction of Critical Heat Flux

Predicting Thermal–hydraulic Performances in Compact Heat Exchangers by Support Vector Regression

Numerical Prediction of CHF Based on CFD Methodology under Atmospheric Pressure and Low Flow Rate

Application of an Artificial Neural Network in Reactor Thermohydraulic Problem: Prediction of Critical Heat Flux

Analysis of CHF in Saturated Forced Convective Boiling on a Heated Surface with Impinging Jets Using Artificial Neural Network and Genetic Algorithm

Development and Application of Data-Driven CHF Model in System Analysis Code

Prediction Of subcooled water flow boiling critical heat flux (CHF) at low pressure

On the prediction of critical heat flux using a physics-informed machine learning-aided framework

Prediction of CHF in Concentric-Tube Open Thermosiphon Using Artificial Neural Network and Genetic Algorithm

CHF experiments and prediction model under subcooling flow boiling condition in passive IVR-ERVC system

Evaluation of Very High CHF for Subcooled Flow Boiling Using an Artificial Neural Network and Mechanistic Models

Comparison of GRNN and RF Algorithms for Predicting Heat Transfer Coefficient in Heat Exchange Channels with Bulges