Effects of Plasticizers on the Strain-Induced Crystallization and Mechanical Properties of Natural Rubber and Synthetic Polyisoprene

Yueqing Ren,Suhe Zhao,Qian Yao,Qianqian Li,Xingying Zhang,Liqun Zhang

DOI: https://doi.org/10.1039/c4ra13504k

IF: 4.036

2015-01-01

RSC Advances

Abstract:Effects of different type of plasticizers on the strain-induced crystallization and stress–strain curves of crystallizable rubber.

What problem does this paper attempt to address?

CHARACTERIZATION METHODS AND RESEARCH PROGRESSES FOR STRETCHING ORIENTATION AND STRAIN-INDUCED CRYSTALLIZATION OF ELASTOMERS

Xu Zhiqiang,Lu Yonglai,Zhang Liqun,Yan Shouke

DOI: https://doi.org/10.3724/sp.j.1105.2011.10361

2011-01-01

Acta Polymerica Sinica

Abstract:Stretching orientation and strain-induced crystallization of rubber is widely recognized to play key role in the self-reinforcement of natural rubber and some synthetic rubbers (such as chloroprene rubber, butyl rubber and hydrogenated nitrile-butadiene rubber). Therefore, studying these phenomena and behavior has substantial significance for understanding the mechanism of the rubber reinforcing. In this review, various characterization methods concerning stretching orientation and strain-induced crystallization of polymer materials as well as principles,features and applicable scope of these methods were summarized and compared. Current progresses in the research about stretching orientation and strain-induced crystallization of nano-fillers (including carbon black, silica, nano clay and carbon nanotube) reinforced rubber composites as well as thermoplastic elastomers were surveyed. Finally, the future developing trend in this research field was prospected.
Strain-induced crystallization behavior of polychloroprene rubber

Peng Zhang,Guangsu Huang,Liangliang Qu,Yijing Nie,Gengsheng Weng,Jinrong Wu

DOI: https://doi.org/10.1002/app.33530

IF: 3

2011-01-01

Journal of Applied Polymer Science

Abstract:The crystallization behavior of polychloroprene rubber (CR) has been studied in this work. Differential scanning calorimetry (DSC) was applied to characterize the crystallization behavior. And X-ray diffraction was applied to determine the impact of crosslinking on the crystallization of CR. Synchrotron X-ray diffraction (SXRD) method was applied to study the dynamic crystalline behavior. On the basis of the experimental results, it is found that crosslinking will hamper the crystallization of CR while large strain can restore this course. And this is in accord with the Mooney-Rivlin analysis result. Detailed discussion was offered circling around this phenomenon. (C) 2011 Wiley Periodicals, Inc. J Appl Polym Sci 121: 37-42, 2011
Microstructure of Polyisoprene and Its Effect on Crystallization Behavior

JinMei TAN,ChuanQing LI,Lin XU,Jie ZHANG,AiMin LIANG,LiQun ZHANG,SiZhu WU

DOI: https://doi.org/10.1360/n032014-00153

2014-01-01

Abstract:It is widely accepted that the outstanding mechanical properties of nature rubber (NR) are partly attributed to the strain-induced crystallization. The strain-induced crystallization of isoprene rubber should also attract our attention because it is the only alternative for NR. The microstructure and crystallization of three grades of polyisoprene rubber has been studied by 13 C and 1 H NMR. There exists slightly difference of cis -1,4 configuration among the three polyisoprene samples. According to the sequential structure of 1,4-configuration, the cis -1,4 units of SKI-5 and YS-IR adopt only head-to-tail arrangement. However, the 1,4-units of SKI-3 consist of head-to-head (about 0.4%~0.5%), tail-to-tail (about 0.3%~0.6%) and head-to-tail arrangement. According to the quantitative measurements, the regularity of the three samples are similar. The crystalizability of polyisoprene rubber have been studied through X-ray diffraction (XRD) method. The NR vulcanizates filled with carbon black crystallize above 400% elongation. But the crystallization of polyisoprene vulcanizates occurs when it is stretched above 500%. According to the mechanical tests, SKI-3, SKI-5 and YS-IR show comparative mechanical properties. The strain-induced crystallization performance of isoprene rubber is inferior to nature rubber because of the differences in the structure and composition.
Influence of Proteins and Phospholipids on Strain Softening Behaviors of Natural Rubber

Xuanyu Shi,Li Yang,Shihao Sun,Jun Zhong,Xiaofeng Yu,Min Zuo,Yihu Song,Qiang Zheng

DOI: https://doi.org/10.1016/j.polymer.2023.126273

IF: 4.6

2023-01-01

Polymer

Abstract:In natural rubber (NR), the non-rubber components such as protein and phospholipids strongly influence the Payne effect and Mullins effect while the mechanisms are not yet clarified so far. Herein deproteinized NR (DPNR) and transesterified DPNR (TEDPNR) are prepared and rheological behaviors are investigated. It is shown that the non-rubber components greatly retard the terminal flow behavior. In comparison with NR, DPNR and TEDPNR exhibit significant hysteresis and worse recoverability under large amplitude shear. During cyclic tensile deformation, the DPNR vulcanizate behaves similar to the NR one, while the TEDPNR one demonstrates higher deformation energy normalized with theoretical shear modulus and dissipation ratio. It is suggested that both the protein and phospholipids influence the Payne effect of NR gum by forming aggregates and creating intermolecular association. On the other hand, the phospholipids rather than protein strongly influence the Mullins effect by lowering their crosslinking density and associating the rubbery chains. This investigation would be enlightening for understanding the mechanisms of the Payne effect and Mullins effect of the NR materials.
Features of strain-induced crystallization of natural rubber revealed by experiments and simulations

Yijing Nie,Zhouzhou Gu,Ya Wei,Tongfan Hao,Zhiping Zhou

DOI: https://doi.org/10.1038/pj.2016.114

IF: 3.135

2017-01-01

Polymer Journal

Abstract:Understanding the strain-induced crystallization (SIC) mechanism of natural rubber (NR) is a prerequisite for comprehending the reinforcement mechanism of NR and for designing new high-performance rubber materials. With the help of new technologies that have enabled more accurate experimental measurement of the microstructure and the use of molecular simulations that can be applied to probe structural changes during stretching in real time, some interesting results have been found. For instance, even at high strains, a very large fraction of the unoriented amorphous phase still remains in the stretched sample with homogeneous or heterogeneous networks. In addition, the onset strain of SIC in peroxide-cured NR decreases with an increasing crosslinking density, while sulfur-cured NR is independent of the crosslinking density, which cannot be explained by conventional theories. The presence of nanofillers, entanglements, non-rubber components and pseudoend-linked networks also results in abnormal phenomena of SIC.
Comprehensive Study on Temperature-Induced Crystallisation and Strain-Induced Crystallisation Behaviours of Natural Rubber/isoprene Rubber Blends

Shuquan Sun,Yonglai Lu,Benjamin S. Hsiao,Dong Wang,Liqun Zhang

DOI: https://doi.org/10.1080/14658011.2017.1335481

2017-01-01

Abstract:The temperature-induced crystallisation (TIC) and strain-induced crystallisation (SIC) of natural rubber (NR)/isoprene rubber (IR) blends varying in blend ratio were mainly studied by dilatometers and wide-angle X-ray diffraction measurements (WAXD). The dilatometers results showed that the real half-life of crystallisation (t(1/2)) values of unvulcanised NR/IR blends were 50% less than the theoretical half-life of crystallisation values. From WAXD measurements, the degree of crystallisation of vulcanised NR/IR with IR content samples 30, 50 and 70% at strain 500% were larger than theoretical crystallinity values by 17.17, 19.99 and 29.69%. NR can significantly improve the property of crystallinity of IR during TIC and SIC processes. The results can be ascribed to the end-linked networks existing in NR which can simultaneously induce amorphous NR and IR chains into crystalline order in NR/IR blends and increase the crystallinity and crystallisation rate during TIC and SIC process.
Toughening Effect of Strain-Induced Crystallites in Natural Rubber.

H. P. Zhang,J. Niemczura,G. Dennis,K. Ravi-Chandar,M. Marder

DOI: https://doi.org/10.1103/physrevlett.102.245503

IF: 8.6

2009-01-01

Physical Review Letters

Abstract:We study fracture propagation in stretched natural rubber sheets. Experimental results in specimens stretched less than 3.8 times show a monotonic increase in the crack speed with stretch and can be explained by a numerical model based on neo-Hookean theory and Kelvin dissipation. In specimens stretched more than 3.8 times, strain-induced crystallites act as reinforcing and toughening fillers and significantly increase fracture resistance, like nanostructures in other polymeric or biological materials. Consequently, as we increase the amount of stretch, fractures travel slower and slower, and eventually halt altogether.
Promoted Strain-Induced-crystallization in Synthetic Cis-1,4-polyisoprene Via Constructing Sacrificial Bonds

Jie Liu,Zhenghai Tang,Jing Huang,Baochun Guo,Guangsu Huang

DOI: https://doi.org/10.1016/j.polymer.2016.06.001

IF: 4.6

2016-01-01

Polymer

Abstract:In order to simulate the effect of non-rubber components on strain-induced crystallization (SIC) in natural rubber (NR), sacrificial metal-ligand bonds are incorporated, for the first time, into cis-1,4 polyisoprene cured by sulfur. The incorporation of sacrificial bonds is found to bring in much smaller onset strain for SIC and higher crystallinity compared with the cis-1,4 polyisoprene with sulfide crosslinks only. Accordingly, the striking improvements in tensile modulus and fracture toughness are achieved. The present work contributes to significant insights for mimicking NR outstanding properties in synthesized cis-1,4 polyisoprene and affords new technological route in improving the mechanical properties of synthesized polyisoprene alternative to the nanofilling.
Strain-induced crystallization and strength of rubber

Alan N. Gent,Liqun Zhang

DOI: https://doi.org/10.5254/1.3547692

IF: 2.081

2002-01-01

Rubber Chemistry and Technology

Abstract:The rate and extent of crystallization in crosslinked samples of natural rubber (NR), cis-1,4-polybutadiene (BR), and butyl rubber (IIR), were studied by observing the relaxation of stress in stretched strips, held at low temperatures.(1-3) Melting temperatures were measured from the recovery of stress on warming. The melting temperature was raised by stretching, and the rise was significantly greater for NR than for BR, consistent with the lower heat of fusion of NR.(4,5) In some cases crystallization was also followed by volume changes, or by DSC or x-ray diffraction. The maximum degree of crystallization was estimated to be only about 20% for BR, 28% for NR, and somewhat higher for IIR. On raising the temperature the tensile strength showed a marked drop to only 1-2 MPa when the elastomer failed to crystallize on stretching.(6) At lower temperatures, when strain-induced crystallization occurred, the tensile strength was much higher, but the values were different for the three elastomers: about 10 MPa for BR, 20 MPa for NR, and 30 MPa for IIR, roughly in proportion to the inferred extent of crystallization. We speculate that molecular entanglements (more dense in BR and less dense in IIR than in NR) are severe obstacles to crystallization in high-molecular-weight polymers.(7) Some specific molecular features are inferred that are needed for an elastomer to crystallize on stretching and to exhibit high strength over a wide temperature range.
Strain-induced crystallization of natural rubber/zinc dimethacrylate composites studied using synchrotron X-ray diffraction and molecular simulation

Yijing Nie

DOI: https://doi.org/10.1007/s10965-014-0642-x

IF: 3.061

2015-01-20

Journal of Polymer Research

Abstract:Natural rubber (NR) reinforced by in situ polymerization of zinc dimethacrylate (ZDMA) exhibits excellent mechanical properties. However, the corresponding reinforcement mechanism is still unclear. Using synchrotron wide-angle X-ray diffraction (WAXD) measurements, we observed that strain-induced crystallization of NR/ZDMA composites had a direct affect on the ultimate mechanical properties. An increase in ZDMA fraction resulted in a lower strain at the onset of crystallization. Further analysis revealed that three factors contributed to the reduction in onset strain, including higher whole cross-linking density due to the emergence of ionic cross-linking clusters, strain amplification of nanodispersion of poly-ZDMA (PZDMA), and the confinement effect of the filler network. The results of dynamic Monte Carlo simulation showed that the confinement effect of the filler network on chain segments favored segmental orientation in regions near the polymer–filler interface, thus inducing a decline in onset strain.

polymer science
The Effect of Epoxidation on Strain-Induced Crystallization of Epoxidized Natural Rubber.

Xi Zhang,Kaijing Niu,Weixiao Song,Shouke Yan,Xiuying Zhao,Yonglai Lu,Liqun Zhang

DOI: https://doi.org/10.1002/marc.201900042

IF: 5.006

2019-01-01

Macromolecular Rapid Communications

Abstract:The effect of epoxidation on strain-induced crystallization (SIC) of epoxidized natural rubber (ENR) and mechanism are studied with synchrotron radiation wide-angle X-ray diffraction (SR-WAXD) and polarized infrared spectroscopy (P-IR). WAXD results reveal that appropriate epoxidation, for example, ENR-25 epoxidized with approximate to 25% isoprene units, can unexpectedly enhance the SIC of natural rubber (NR), resulting in the improvement of tear resistance. On the other hand, exorbitant epoxidation, for example, ENR-40 epoxidized with approximate to 40% isoprene units, depresses the SIC and weakens the mechanical properties of NR remarkably. P-IR studies reveal that epoxidation can promote the orientation of chain segments along the stretching direction, which plays a determining role on SIC of NR. Accordingly, hierarchical multiscale schematic models are proposed. This insight into epoxidation on SIC of ENR strongly suggests that ENR with appropriate epoxidation degree is a promising candidate material for the fabrication of high-performance engineering rubber products.
New insights into thermodynamic description of strain-induced crystallization of peroxide cross-linked natural rubber filled with clay by tube model

Yijing Nie,Guangsu Huang,Liangliang Qu,Xiaoan Wang,Gengsheng Weng,Jinrong Wu

DOI: https://doi.org/10.1016/j.polymer.2011.05.004

IF: 4.6

2011-01-01

Polymer

Abstract:Clay changes the strain-induced crystallization behavior of natural rubber and induces a dual crystallization mechanism due to the orientation of clay layers during deformation. The structure evolution was probed by in-situ synchrotron wide-angle X-ray diffraction, while the thermodynamics of the onset of crystallization was analyzed by the tube model. The entropy change required for the onset of the strain-induced crystallization of the clay filled rubber is composed of the entropy reduction due to the rubber–filler interactions and also the stretching. The summation of the two kinds of the entropy reduction is nearly equal to that of the neat rubber. The thermodynamic analysis reveals that the orientation of clay layers along the direction of stretching reduces the chain conformational entropy and changes the crystallization mechanism. These results give some new insights into the strain-induced crystallization process and the reinforcement mechanism for the clay filled rubber.
The effect of elastomeric nano-particles on the mechanical properties and crystallization behavior of polypropylene

Manli Zhang,Yiqun Liu,Xiaohong Zhang,Jianming Gao,Fan Huang,Zhihai Song,Genshuan Wei,Jinliang Qiao

DOI: https://doi.org/10.1016/S0032-3861(02)00393-2

IF: 4.6

2002-01-01

Polymer

Abstract:Generally, toughness of polypropylene (PP) is an issue which has been investigated for many years to search for improvements. A traditional approach is to blend with rubber particles to enhance the toughness of PP yet modulus of PP decreases accordingly. Recently, we have achieved a good balance of toughness and stiffness of PP via blending PP with a small amount of elastomeric nano-particles (ENP). Based on our measurements, mechanical properties of the blends studied both the toughness of PP at room temperature and at −20°C show substantial increase. On the other hand, the stiffness of the PP blends retains or even possesses a slight enhancement. One of the reasons for this improvement is due to the fact that the ENP is not only a toughening modifier but also a nucleation agent for the PP. The nucleation density of the blends increases, while the crystallization kinetics of the blends becomes faster compared with the pure PP samples.
Thermodynamic Description of Strain-Induced Crystallization of Natural Rubber by A Combination of the Tube Model and A Scaling Argument

Yijing Nie

DOI: https://doi.org/10.1080/00222348.2015.1019959

2015-01-01

Abstract:The addition of nanoparticles remarkably improves the mechanical properties and strain-induced crystallizability of natural rubber. To reveal the underlying mechanism for the enhancement of these physical properties, we analyzed the microstructural changes of rubber due to the inclusion of clay and carbon black by using the tube model. The rubber filled with clay exhibited a stronger confinement effect of entanglements on the chain conformation compared with the pure rubber and that filled with carbon black. As a result, we propose a new thermodynamic approach to the entropic elasticity of entangled rubber by a combination of the blob scaling argument and the tube model. The thermodynamic analysis demonstrated that the restriction effects of both entanglements and the filler network led to a reduction of the conformational entropy in clay-filled rubber, resulting in the decrease of the onset strain of crystallization. These results revealed the mechanism of the strain-induced crystallization and filler reinforcement from the viewpoint of thermodynamics.
Filler-induced heterogeneous distribution of stretch-induced crystallization in natural rubber: An in-situ synchrotron-radiation micro-focused scanning X-ray diffraction study

Liang Chen,Weiming Zhou,Fengmei Su,Wenhua Zhang,Pinzhang Chen,Youxin Ji,Liangbin Li

DOI: https://doi.org/10.1016/j.polymer.2017.03.043

IF: 4.6

2017-01-01

Polymer

Abstract:Crystallinity distribution of natural rubber around filled micrometer-size glass beads under different strains are studied with in-situ micro-focused scanning X-ray diffraction (μ-SXRD), where the glass beads are taken to serve as a model of filler. The experimental results suggest, due to the gradient stress field around the glass bead, the oscillatory distribution of crystallinities around the glass bead tends to form soft-hard double network with multi-scale hierarchical structures and spontaneously responds to external strains. The double network spreads stress in larger region and avoids stress concentration, in which the hard domains with high crystallinities effectively sustain the external stress while the soft domains with low crystallinity store elastic energy. According to the equal strain and equal stress conditions, the quantitative calculation on enhancement factor indicates that the soft-hard double network structure can increase the fracture energy to about three orders of magnitude as comparing to that of structure with homogeneous distribution of crystallinity.
Strain-Induced Crystallization Behavior of Natural Rubber and Trans-1,4-Polyisoprene Cross Linked Blends

Liangliang Qu,Guangsu Huang,Yijing Nie,Jinrong Wu,Gengsheng Weng,Peng Zhang

DOI: https://doi.org/10.1002/app.33243

IF: 3

2010-01-01

Journal of Applied Polymer Science

Abstract:The strain-induced crystallization (SIC) behaviors of crosslinked blends based on natural rubber (NR) and trans-1,4-polyisoprene (TPI) with different content of TPI were probed explored by using synchrotron two-dimensional wide angle X-ray diffraction and dynamic mechanical analysis. The results showed that when TPI content is less than 70% no reflection peak of TPI but NR crystallite diffractions can be observed and the diffractions of TPI beta form appear when TPI content is 70 wt % in the cocured blend. SIC of cocured blends started at smaller strain ratio than the pure NR. By calculating Delta S-def, it is found that the drop in entropy upon strain decreased when TPI is incorporated into NR due to the reduction of molecular mobility of NR. The degree of SIC and crystallization rate index in crosslinked blends monotonously decreased with the increase of TPI content. The apparent crystallite size exhibited some surprising variations. L-200 and L-120 decreased with the increase of TPI content in the cocured blends. These observations were usually caused by two factors: (i) Less number of polymer chains could involve in crystal growth due to the lower mobility of polymer chains in the cocured blends which is proved by dynamic mechanical analysis results; (ii) The mean distance between nuclei decreases, which was caused by the fluctuation of crosslink density in NR phase derived from the heterogeneous distribution of curatives in two phases supported by the varying tendency of curing degree and crosslink density. (C) 2010 Wiley Periodicals, Inc. J Appl Polym Sci 120: 1346-1354, 2011
Effects of Plasticizer on Shear Modification of Polystyrene

JW QIAN,A RUDIN,JW TEH

DOI: https://doi.org/10.1002/pi.4990240307

IF: 3.213

1991-01-01

Polymer International

Abstract:The elastic and viscous properties of polymer melts may be affected by the shear history of the polymer. The extrudate swell of a polymer melt is primarily a manifestation of the elasticity of the polymer melt. In this study, a single screw extruder was used to impose different shear histories on a polystyrene polymer which was processed with and without added plasticizer. The extrudate swell and apparent viscosity of these melts were measured with a capillary rheometer. These characteristics of unplasticized polystyrene are almost not affected by the various preshearing processes. However, the extrudate swell and viscosity of polystyrene containing plasticizer are affected by plasticizer level, shear history and thermal history. After most of the plasticizer in the presheared plasticized polystyrene was extracted, the extrudate swell was still lower than that of the parent sheared polystyrene with the same shear history and the same plasticizer content. These results were obtained without significant changes in molecular weight.Shear modification by conventional process equipment may become impractical if the shear field intensity or dwell time of the material in the apparatus is limited. In such cases, shear refinability by standard process equipment may be observed if the coupling density in the polymer is reduced by some additional means, such as blending with a plasticizer.
Manipulating the mechanical properties of cis-polyisoprene nanocomposites via molecular dynamics simulation

Qionghai Chen,Wanhui Huang,Pengwei Duan,Tongkui Yue,Liqun Zhang,Xiaohui Wu,Jun Liu

DOI: https://doi.org/10.1016/j.polymer.2022.125233

IF: 4.6

2022-09-21

Polymer

Abstract:Attributed to the reinforcing effect of the NPs, filled natural rubber (NR) exhibits more excellent mechanical properties compared to pure natural rubber and has been attracting considerable scientific and technological attention. However, only a few studies have shown a systematical understanding of the structure-mechanics relation of filled natural rubber. Herein, a common strategy used to study the effects of the critical structural factors on strain-induced crystallization (SIC) and mechanical properties at the molecular level is to adopt molecular dynamic simulation (MD). Increasing the cross-linkage of the polymer matrix improves the entanglement degree, and the mechanical properties are reinforced by the high orientation of the polymer chains due to the high entanglement degree and the dissipation of energy due to the unentangling. Surprisingly, we find that the stress-strain behaviour of filled natural rubber is significantly manipulated by nanoparticle (NP) content, size and strength of interfacial interaction, evidenced by the increase of the chain orientation, SIC, and energy dissipated by NPs and polymer matrix, compared with the case of pure natural rubber. The underlying mechanism is the adsorption of the polymer by NPs, which leads to the orientation and crystallization of the polymer chains induced by NPs during the deformation process and energy dissipation through the slip of NPs and polymer chains. In general, this work demonstrates a detailed molecular-level structure-mechanics relation of filled natural rubber and provides some rational guidelines for experimentally designing and fabricating high-performance elastomer nanocomposites.

polymer science
Strain‐induced Crystallization of Natural Rubber with High Strain Rates

Baijin Zhao,Nan Tian,Yanpin Liu,Tingzi Yan,Weiqing Zhou,Liangbin Li,Yingui Zhou,Gengsheng Weng,Guangsu Huang

DOI: https://doi.org/10.1002/polb.23172

2012-01-01

Abstract:Strain-induced crystallization (SIC) of natural rubber (NR) samples with different strain rates at a fixed strain was investigated by synchrotron radiation X-ray diffraction measurements, which provided the evolution trends of crystal sizes and crystallinity during the SIC process. It was found that the Avrami index was about 1 during the crystallization of NR after the cessation of stretch, which demonstrated that sporadic nucleation occurred during SIC process. The increase of the crystallinity was attributed to the increase of the number of new crystallites rather than the growth of the crystal size. An unexpected relationship between the final crystallinity and the strain rates was observed. The increase of physical crosslink points originated from either entanglement or crystallite was considered as the reason that leads to the nonmonotonic variation of the final crystallinity with strain rates. (c) 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012
Promoted Strain-Induced Crystallization of Cis-1, 4-Polyisoprene with Functional Carbon Nanodots

Bin Liu,Sheng Wang,Jie Liu,Zhenghai Tang,Baochun Guo

DOI: https://doi.org/10.1016/j.aiepr.2019.01.002

2019-01-01

Advanced Industrial and Engineering Polymer Research

Abstract:The excellent mechanical properties and fatigue-resistance of natural rubber (NR) are closely related to the strain-induced crystallization (SIC) capability of NR, which is originated from the unique network structure of NR. The synthetic counterpart of NR, cis-1,4-polyisoprene (IR) generally possesses inferior mechanical performance due to insufficient SIC capability. In this contribution, amino-functionalized carbon nanodots (CDs) were introduced as high-functionality cross-linkers into sulfur-cured sulfonated IR, aiming to improve the SIC capability of IR. The amino groups on CD surfaces are connected with the sulfonic acid groups on the IR backbones to form ionic bonds, and a covalent crosslinking is concurrently obtained by using sulfur vulcanization, thereby a dually crosslinked IR network is resulted. When the rubber is deformed, the ionic bond breaks preferentially prior to the rupture of covalent bond, leading to efficient energy dissipation. The preferential rupture of the ionic bonds also promotes the orientation process of IR chains and hence SIC capability, as evidenced by lowered onset strain for crystallization and increased crystallinity. The promoted SIC leads to remarkably improved tensile properties.

Effects of Plasticizers on the Strain-Induced Crystallization and Mechanical Properties of Natural Rubber and Synthetic Polyisoprene

CHARACTERIZATION METHODS AND RESEARCH PROGRESSES FOR STRETCHING ORIENTATION AND STRAIN-INDUCED CRYSTALLIZATION OF ELASTOMERS

Strain-induced crystallization behavior of polychloroprene rubber

Microstructure of Polyisoprene and Its Effect on Crystallization Behavior

Influence of Proteins and Phospholipids on Strain Softening Behaviors of Natural Rubber

Features of strain-induced crystallization of natural rubber revealed by experiments and simulations

Comprehensive Study on Temperature-Induced Crystallisation and Strain-Induced Crystallisation Behaviours of Natural Rubber/isoprene Rubber Blends

Toughening Effect of Strain-Induced Crystallites in Natural Rubber.

Promoted Strain-Induced-crystallization in Synthetic Cis-1,4-polyisoprene Via Constructing Sacrificial Bonds

Strain-induced crystallization and strength of rubber

Strain-induced crystallization of natural rubber/zinc dimethacrylate composites studied using synchrotron X-ray diffraction and molecular simulation

The Effect of Epoxidation on Strain-Induced Crystallization of Epoxidized Natural Rubber.

New insights into thermodynamic description of strain-induced crystallization of peroxide cross-linked natural rubber filled with clay by tube model

The effect of elastomeric nano-particles on the mechanical properties and crystallization behavior of polypropylene

Thermodynamic Description of Strain-Induced Crystallization of Natural Rubber by A Combination of the Tube Model and A Scaling Argument

Filler-induced heterogeneous distribution of stretch-induced crystallization in natural rubber: An in-situ synchrotron-radiation micro-focused scanning X-ray diffraction study

Strain-Induced Crystallization Behavior of Natural Rubber and Trans-1,4-Polyisoprene Cross Linked Blends

Effects of Plasticizer on Shear Modification of Polystyrene

Manipulating the mechanical properties of cis-polyisoprene nanocomposites via molecular dynamics simulation

Strain‐induced Crystallization of Natural Rubber with High Strain Rates

Promoted Strain-Induced Crystallization of Cis-1, 4-Polyisoprene with Functional Carbon Nanodots