Abstract:The solution processing of polycrystalline perovskite films introduces trap states that can adversely affect their optoelectronic properties. Motivated by the use of small-molecule surfactants to improve the optoelectronic performance of perovskites, we demonstrate the use of polymers with coordinating groups to improve the performance of solution-processed semiconductor films. The use of these polymer modifiers results in a marked change in the electronic properties of the films, as measured by both carrier dynamics and overall device performance. The devices grown with the polymer poly(4-vinylpyridine) (PVP) show significantly enhanced power conversion efficiency from 16.9 ± 0.7% to 18.8 ± 0.8% (champion efficiency, 20.2%) from a reverse scan and stabilized champion efficiency from 17.5 to 19.1% [under a bias of 0.94 V and AM (air mass) 1.5-G, 1-sun illumination over 30 min] compared to controls without any passivation. Treating the perovskite film with PVP enables a VOC of up to 1.16 V, which is among the best reported for a CH3NH3PbI3 perovskite solar cell and one of the lowest voltage deficits reported for any perovskite to date. In addition, perovskite solar cells treated with PVP show a long shelf lifetime of up to 90 days (retaining 85% of the initial efficiency) and increased by a factor of more than 20 compared to those without any polymer (degrading to 85% after ~4 days). Our work opens up a new class of chemical additives for improving perovskite performance and should pave the way toward improving perovskite solar cells for high efficiency and stability.

Efficient and Low-Temperature Processed Perovskite Solar Cells Based on A Cross-Linkable Hybrid Interlayer

Tailored Phase Conversion under Conjugated Polymer Enables Thermally Stable Perovskite Solar Cells with Efficiency Exceeding 21.

Polymer-modified halide perovskite films for efficient and stable planar heterojunction solar cells.

Perovskite Photovoltaics: Pseudohalide‐Induced Recrystallization Engineering for CH3NH3PbI3 Film and Its Application in Highly Efficient Inverted Planar Heterojunction Perovskite Solar Cells (adv. Funct. Mater. 2/2018)

Low temperature ZnO/TiOx electron-transport layer processed from aqueous solution for highly efficient and stable planar perovskite solar cells

Low‐Temperature Solution‐Processed ZnO Electron Transport Layer for Highly Efficient and Stable Planar Perovskite Solar Cells with Efficiency over 20%

Enhanced electron extraction using SnO2 for high-efficiency planar-structure HC(NH2)2PbI3-based perovskite solar cells

Hydrophobic Fluorinated Conjugated Polymer as a Multifunctional Interlayer for High-Performance Perovskite Solar Cells

Low‐Temperature Solution‐Processed CuCrO2 Hole‐Transporting Layer for Efficient and Photostable Perovskite Solar Cells

Multifunctional Cross-Linked Hole Transporting Interfacial Layer for Efficient and Stable Perovskite Solar Cells

High-performance inverted planar heterojunction perovskite solar cells based on a solution-processed CuOx hole transport layer.

Interconnected SnO2 Nanocrystals Electron Transport Layer for Highly Efficient Flexible Perovskite Solar Cells

Holistic Dielectric and Buffer Interfacial Layers Enable High-Efficiency Perovskite Solar Cells and Modules

Low-temperature aqueous solution processed ZnO as an electron transporting layer for efficient perovskite solar cells

Interfacial-engineering enhanced performance and stability of ZnO nanowire-based perovskite solar cells

Regulating the Perovskite/c60 Interface Via a Bifunctional Interlayer for Efficient Inverted Perovskite Solar Cells

Simultaneously Enhanced J(Sc) And Ff By Employing Two Solution-Processed Interfacial Layers For Inverted Planar Perovskite Solar Cells

Tailoring Perovskite Adjacent Interfaces by Conjugated Polyelectrolyte for Stable and Efficient Solar Cells

Reducing the Interfacial Energy Loss Via Oxide/perovskite Heterojunction Engineering for High Efficient and Stable Perovskite Solar Cells

Preheating-assisted deposition of solution-processed perovskite layer for an efficiency-improved inverted planar composite heterojunction solar cell

Multifunctional Hybrid Interfacial Layers for High‐Performance Inverted Perovskite Solar Cells