Abstract:Purpose - The purpose of this paper is to investigate the tribological properties Of MoS2 nano-sized hollow spheres in liquid paraffin (LP) and the corresponding action mechanism. Morever, its feasibity of industrial application as an oil additive in the industrial lubrication field is also explored.Design/methodology/approach - The tribological properties Of MoS2 nano-sized hollow spheres (NH-MoS2) modified by Cyanex 301(di-(2,4,4trim ethyl pentyl) dithiophosphinic acid) with size of 200 similar to 300nm in LP are studied and compared with those of the commercial colloidal MoS2 (CC-MoS2) on a four-ball tester and an Optimol SRV Oscillating friction and wear tester in a ball-on disk configuration. The worn surfaces of the lower flat disc are examined with a scanning electron microscopy and an X-ray photoelectron spectroscopy, respectively.Findings - Results show that NH-MoS2 is a better extreme-pressure additive and anti-wear (AW) and friction-reducing additive in LP than CC-MoS72. Under the optimum concentration of 0.5 per cent for both NH-MoS2 and CC-MoS2 and the load of 400 N, the friction coefficient of NH-MoS2 + LP and CC-MoS2 + LP decreases about 43.8 and 6.3 per cent, and the wear volume loss decreases about 60.3 and 12.0 per cent compared with the pure LP. The boundary lubrication mechanism for NH-MoS2 + LP can be deduced as the effective chemical adsorption protective film formed by the long chain alkyls R and active elements (S and P) in the modification layer and tribochemical reaction film containing the tribochemical products of the additive. Moreover, sliding and rolling frictions co-exist in NH-MoS2 + LP, doing contributions to the good tribological properties as well.Originality/value - In this paper, the Cyanex 301-modified MoS2 nano-sized hollow spheres with diameter of 200 similar to 300 nm are firstly added into LP to investigate its tribological properties. The excellent AW and friction-reducing properties indicate that this MoS2 hollow spheres product is a good oil additive, and the fundamental data presented here will be useful for its further industrial application in the future.

Synthesis and Tribological Properties of W-Doped Mos2 Nanoplates

Preparation of Flaky Nano-MoS2 and Its Anti-friction and Anti-wear Performance in Oil

Hydrothermal Synthesis of Mos2 and Its Lubricating Properties

The Synthesis of MoS2 Particles with Different Morphologies for Tribological Applications

The Synthesis of Two-Dimensional MoS(2 )nanosheets with Enhanced Tribological Properties As Oil Additives

α-MoO3@SiO2 core-shell nanospheres: spatially confined synthesis and tribological properties

Tribological Properties of Molybdenum Disulphide Nanoparticles in Soybean Oil

Effect of MoS2 on the Tribological Properties of in Situ Fe3Al-20 Wt% Al2O3-4 Wt% Cr Composites

Tribological Properties of MoS2 Nanosheets Solid Lubricant Planted on TiO2 Nanotube Array Bed

High-efficiency Preparation of Oil-Dispersible MoS2 Nanosheets with Superior Anti-Wear Property in Ultralow Concentration

Synthesis and Tribological Properties of the Novel Tubular MoS2/GR Nanocomposite

Study on the Performance of Different Crystal Forms Nano MoS2 as Lubricant Additives in Reducing Wear and Friction

Tribological Properties Of Cyanex 301-Modified Mos2 Nano-Sized Hollow Spheres In Liquid Paraffin

Preparation of nano-scale molybdenum disulfide by liquid phase precipitation method and its lubricating properties

Tribological Behavior of Fe3o4/Mos2 Nanocomposites Additives in Aqueous and Oil Phase Media

Study on Synthesis and Tribological Properties Characterization of MoS2-TiL/MoS2-TiH Nano Multilayer Coating

Facile Synthesis of Molybdenum Disulfide Micro-Spheres and the Tribological Properties in Liquid Paraffin

Solid lubricant behavior of MoS2 and WSe2-based nanocomposite coatings

Surfactant-assisted Hydrothermal Synthesis and Tribological Properties of Flower-Like Mos 2 Nanostructures

Tribological property of MoS2-Cr3O4 nanocomposite films prepared by PVD and liquid phase synthesis

Preparation of Multifunctional Nano-Molybdenum Disulfide and Its Tribological Properties in Water-Based Cutting Fluids.