In Situ Growth of Nickel Selenide Nanowire Arrays on Nickel Foil for Methanol Electro-Oxidation in Alkaline Media

Qiong Luo,Mingying Peng,Xuping Sun,Abdullah M. Asiri

DOI: https://doi.org/10.1039/c5ra12275a

IF: 4.036

2015-01-01

RSC Advances

Abstract:NiSe nanowire arrays solvothermally grown on nickel foil behave as an efficient 3D anode for electro-catalytic oxidation of methanol in alkaline media with strong durability.

What problem does this paper attempt to address?

Solution‐Liquid‐Solid Synthesis of Hexagonal Nickel Selenide Nanowire Arrays with a Nonmetal Catalyst

Kun Xu,Hui Ding,Kaicheng Jia,Xiuli Lu,Pengzuo Chen,Tianpei Zhou,Han Cheng,Si Liu,Changzheng Wu,Yi Xie

DOI: https://doi.org/10.1002/anie.201508704

2015-01-01

Angewandte Chemie

Abstract:Inorganic nanowire arrays hold great promise for next-generation energy storage and conversion devices. Understanding the growth mechanism of nanowire arrays is of considerable interest for expanding the range of applications. Herein, we report the solution-liquid-solid (SLS) synthesis of hexagonal nickel selenide nanowires by using a nonmetal molecular crystal (selenium) as catalyst, which successfully brings SLS into the realm of conventional low-temperature solution synthesis. As a proof-of-concept application, the NiSe nanowire array was used as a catalyst for electrochemical water oxidation. This approach offers a new possibility to design arrays of inorganic nanowires.
Three‐Dimensionally Arranged NiSe2 Nanosheets as an Efficient Electrocatalyst for Methanol Electrooxidation Reaction

Nabi Ullah,Dariusz Guziejewski,Asim Mahmood,Sami Ullah,Sikandar Khan,Shahid Hussain,Muhammad Imran

DOI: https://doi.org/10.1002/ente.202400390

IF: 4.149

2024-06-27

Energy Technology

Abstract:The three‐dimensionally arranged NiSe2 nanosheets are prepared via solvothermal followed by annealing method and applied for electrochemical methanol oxidation reaction and delivered good response. Methanol oxidation stands out as a pivotal solution in addressing the global energy crisis and environmental pollution, owing to its practical applicability, high current density, and the ready availability of methanol as a fuel source. To effectively catalyze methanol oxidation, an electrocatalyst is imperious to overcome the activation energy barrier. Herein, a three‐dimensionally arranged NiSe2 nanosheet‐based electrocatalyst is synthesized through a facile solvothermal followed by an annealing method. The catalyst's porous structure enhances catalytic efficiency by providing a substantial electrochemical surface area (ECSA) equivalent to 0.121 mF cm−2. Notably, the electrocatalyst exhibits a remarkable response of 21.58 mA cm−2 at an overpotential of 1.70 V vs RHE, accompanied by the lowest Tafel slope recorded at 39.14 mV dec−1. The electronic circuit, represented by Rs(Qf(RfW(QdlRct)), aligns well with electrochemical impedance spectroscopy data, elucidating the reaction path and intrinsic properties. Furthermore, the catalytic performance is elucidated concerning ECSA and weight, revealing current densities of 5.60 mA cm−2 and 71.34 mA mg−1, respectively. Impressively, the catalyst demonstrates exceptional resistance to poisoning and sustained stability over a continuous 3600‐s operation. This comprehensive study underscores the promising potential of the NiSe2 nanosheet‐based electrocatalyst for efficient methanol oxidation, providing valuable insights for advancing clean energy technologies.

energy & fuels
In-situ fabrication of NixSey/MoSe2 hollow rod array for enhanced catalysts for efficient hydrogen evolution reaction

Song Liu,Xuefeng Lv,Guangsheng Liu,Chen Li,Kunyapat Thummavichaia,Zhen Li,Linyi Zhang,Zhini Bin,Nannan Wang,Yanqiu Zhu

DOI: https://doi.org/10.1016/j.jcis.2022.03.012

IF: 9.9

2022-07-01

Journal of Colloid and Interface Science

Abstract:Alkaline water electrocatalysis is considered as one of the most reliable method to prepare the stable, inexpensive, and sustainable water splitting catalyst in large-scale. Recently, MoSe2 attracted great attention as a promising catalyst because of its high electrochemical activity and earth-abundant nature. In this paper, bionic NixSey/MoSe2 coralline-liked heterogeneous structures were successfully prepared on 3D nickel foam (NF) via a simple solvothermal process complemented by hydrothermal strategy with selenization and alkali treatment. Furthermore, to overcome the less active sites and poor electrical conductivity of MoSe2, we learned from the coral structure for the inspiration, and reported a novel hollow rod-like structure with increased active sites. Also, 1 T-2H MoSe2 improved the electrical conductivity of single phase MoSe2. We first confirmed the multi-phase of catalyst by XPS analysis with Mo 3d5/2 splited into two independent regions with the 2H and 1 T phase transition. The optimal ratio of NixSey/MoSe2/NF-5 exhibited excellent electrocatalytic activity towards HER in 1 M KOH, driving current densities of 10, 100 and 200 mA cm-2 at only 76, 165 and 194 mV with stability over 24 h. The work provides new ideas for the construction of transition metal selenides hollow rod array structures of efficient HER electrocatalysts.

chemistry, physical
NiSe-modified CoMoO 4 nanosheets as bifunctional electrocatalysts for hydrogen and oxygen evolution reactions

Menghe Jiang,Zhicong Hu,Yongjin Zou,Cuili Xiang,Fen Xu,Lixian Sun,Xuebu Hu

DOI: https://doi.org/10.1016/j.jallcom.2024.173495

IF: 6.2

2024-01-13

Journal of Alloys and Compounds

Abstract:Selecting self-supporting substrates with large specific surface areas is an effective strategy to avoid the agglomeration of nanomaterials and improve the structural stability of materials while increasing their electrical conductivity. In this study, CoMoO 4 nanosheet structures were first grown on a nickel foam (NF) substrate by hydrothermal and calcination processes. Then, NiSe nanoparticles were deposited on NF/CoMoO 4 by a constant potential method to construct NF/CoMoO 4 @NiSe nanosheet electrode materials with graded layered structures. This nanosheet structure grown on NF substrates provided enough space for mass transfer and fully exposed the electrochemical active sites. Meanwhile, the self-supported electrode reduced the indirect contact resistance between the electrocatalyst and the substrate, which promoted the timely release of generated bubbles from the electrode. The NF/CoMoO 4 @NiSe electrode exhibited excellent hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) electrocatalytic activities under alkaline conditions. Overpotentials of only 58 mV and 184 mV were needed to achieve a current density of 10 mA·cm -2 for the HER and OER, respectively. This study presents new ideas for the construction of nanosheet structures and the design of efficient HER and OER bifunctional electrocatalysts using transition metal selenides.

materials science, multidisciplinary,chemistry, physical,metallurgy & metallurgical engineering
In situ growth of MoSe2 nanosheets array on Mo foil: An efficient and durable hydrogen evolution electrocatalyst

Weizhi Wang,Huihui Cao,Wei Li,Junyao Wu,Enhong Sheng,Zheng Chen,Weng-Chon Cheong,Konglin Wu

DOI: https://doi.org/10.1016/j.matlet.2020.127828

IF: 3

2020-08-01

Materials Letters

Abstract:In this letter, we present a facile solvothermal approach for the synthesis of MoSe2 nanosheets array on Mo foil (MoSe2@Mo). Mo foil served both as a Mo precursor and a substrate, on which uniformly distributed MoSe2 nanosheets array was directly grown in situ. The as-prepared MoSe2@Mo catalyst exhibited great hydrogen evolution reaction (HER) electrocatalytic activity and stability in both acidic and alkaline media.

materials science, multidisciplinary,physics, applied
Hierarchical NiSe@Ni nanocone arrays electrocatalyst for oxygen evolution reaction

Yu-Yang Sun,Yu-Xun Zhu,Lian-Kui Wu,Guang-Ya Hou,Yi-Ping Tang,Hua-Zhen Cao,Guo-Qu Zheng

DOI: https://doi.org/10.1016/j.electacta.2020.136519

IF: 6.6

2020-09-01

Electrochimica Acta

Abstract:Developing an oxygen evolution reaction (OER) electrocatalyst with low cost, abundant reserve and excellent performance is essential for extensive application of clean and renewable hydrogen energy. The present work proposed to fabricate hierarchical NiSe-based nanocone arrays on stainless steel (SS) for OER. Firstly, nickel nanosheet array was electrodeposited on SS (Ni/SS). Then, the Ni/SS was selenized via hydrothermal to form /SS. Finally, activation was performed by consecutive CV scans to convert NiSe into O-NiSe (/SS). The influence of selenization temperature and duration time on the morphology and OER performance were systematically investigated. Results showed that the optimized /SS performed high OER activity and good stability in 1.0 M KOH (pH = 14). To provide a current density of 10 mA cm-2, an overpotential of 290 mV was needed and a small Tafel slope of 48 mV dec-1 was observed. The good OER performance was attributed to the reduced charge transfer resistance and increased electrochemical active sites.

electrochemistry
Selenate promoted stability improvement of nickel selenide nanosheet array with an amorphous NiOOH layer for seawater oxidation

Hui Zhang,Xun He,Kai Dong,Yongchao Yao,Shengjun Sun,Min Zhang,Meng Yue,Chaoxin Yang,Dongdong Zheng,Qian Liu,Yonglan Luo,Binwu Ying,Sulaiman Alfaifi,Xuqiang Ji,Bo Tang,Xuping Sun

DOI: https://doi.org/10.1016/j.mtphys.2023.101249

IF: 11.021

2023-11-01

Materials Today Physics

Abstract:Seawater electrolysis offers significant potential for green hydrogen production, the presence of harmful chlorine species, nevertheless, can cause severe anode corrosion. Here, we present our recent finding that selenate anions adsorbed nickel selenide nanosheet array with an amorphous NiOOH layer on Ni foam (NiSe2@NiOOH/NF) serves as a high-efficiency and durable electrocatalyst for oxygen evolution reaction (OER) in alkaline seawater. It requires an overpotential of 460 mV to obtain 500 mA cm−2. Impressively, it shows at least 100 h of electrolysis tolerance at 500 mA cm−2. Insights from electrochemical in situ Raman spectroscopy and chlorine extraction tests unveil that selenite undergoes oxidation to selenate during the OER test, effectively suppressing hypochlorite generation.

materials science, multidisciplinary,physics, applied
Self-supported ternary Ni-S-Se nanorod arrays as highly active electrocatalyst for hydrogen generation in both acidic and basic medium：experiment investigation and DFT calculation.

Huijie Meng,Wenjuan Zhang,Zizai Ma,Fei Zhang,Bin Tang,Jinping Li,Xiaoguang Wang

DOI: https://doi.org/10.1021/acsami.7b14506

IF: 9.5

2018-01-01

ACS Applied Materials & Interfaces

Abstract:In this paper, a novel three-dimensional self-supported ternary NiS-Ni9S8-NiSe nanorod (NR) array cathode has been successfully in-situ constructed by a two-step hydrothermal route. When applied to hydrogen evolution, the synthesized NiS-Ni9S8-NiSe-NR electrode demonstrates optimized electrocatalytic activity and long-term durability, only requiring overpotentials as low as 120 mV and 112 mV to drive 10 mA cm-2 for hydrogen evolution reaction in 0.5 M H2SO4 and 1.0 M KOH, respectively. DFT calculation reveals that, after Se doping, Se 3d orbitals are bonded to Ni 3d orbitals and S p orbitals near Fermi level, attesting a significant electron transfer between nickel and selenium atom. The success of enhancing the electrocatalytic performance via introducing the Se dopant holds great promise for the potential optimization of other transition metal compounds in highly-efficient electrochemical water splitting for large-scale hydrogen production.
Direct growth of NiCo2O4 nanostructures on conductive substrates with enhanced electrocatalytic activity and stability for methanol oxidation

Lei Qian,Li Gu,Li Yang,Hongyan Yuan,Dan Xiao

DOI: https://doi.org/10.1039/c3nr01104f

IF: 6.7

2013-08-21

Nanoscale

Abstract:In this report, NiCo2O4 nanostructures with different morphologies were directly grown on conductive substrates (stainless steel and ITO) by a facile electrodeposition method in addition to a post-annealing process. The morphology changes on different conductive substrates are discussed in detail. The NiCo2O4 on stainless steel (SS) had a high surface area (119 m(2) g(-1)) and was successfully used in the electrocatalytic oxidation of methanol. The electrocatalytic performance was investigated by cyclic voltammetry (CV), chronoamperometry and electrochemical impedance spectroscopy (EIS) measurements. Impressively, the NiCo2O4 showed much higher electrocatalytic activity, lower overpotential and greater stability compared to that of only NiO or Co3O4 synthesized by the same method. The higher electrocatalytic activity is due to the high electron conductivity, large surface area of NiCo2O4 and the fast ion/electron transport in the electrode and at the electrolyte-electrode interface. This is important for further development of high performance non-platinum electrocatalysts for application in direct methanol fuel cells.
Controllable Synthesis of Ni xSe (0.5 ≤ x ≤ 1) Nanocrystals for Efficient Rechargeable Zinc-Air Batteries and Water Splitting

Xuerong Zheng,Xiaopeng Han,Hui Liu,Jianjun Chen,Dongju Fu,Jihui Wang,Cheng Zhong,Yida Deng,Wenbin Hu

DOI: https://doi.org/10.1021/acsami.8b01651

2018-04-25

Abstract:The development of earth-abundant, highly active, and corrosion-resistant electrocatalysts to promote the oxygen reduction reaction (ORR) and oxygen and hydrogen evolution reactions (OER/HER) for rechargeable metal-air batteries and water-splitting devices is urgently needed. In this work, Ni xSe (0.5 ≤ x ≤ 1) nanocrystals with different crystal structures and compositions have been controllably synthesized and investigated as potential electrocatalysts for multifunctional ORR, OER, and HER in alkaline conditions. A novel hot-injection process at ambient pressure was developed to control the phase and composition of a series of Ni xSe by simply adjusting the added molar ratio of the nickel resource to triethylenetetramine. Electrochemical analysis reveals that Ni0.5Se nanocrystalline exhibits superior OER activity compared to its counterparts and is comparable to RuO2 in terms of the low overpotential required to reach a current density of 10 mA cm-2 (330 mV), which may benefit from the pyrite-type crystal structure and Se enrichment in Ni0.5Se. For the ORR and HER, Ni0.75Se nanoparticles achieve the best performance including lower overpotentials and larger apparent current densities. Further investigations demonstrate that Ni0.75Se could not only provide an enhanced electrochemical active area but also facilitate electron transfer during the electrocatalytic process, thus contributing to the remarkable catalytic activity. As a practical application, the Ni0.75Se electrode enables rechargeable Zn-air battery with a considerable performance including a long cycling lifetime (200 cycles), high specific capacity (609 mA h g-1 based on the consumed Zn), and low overpotential (0.75 V) at 10 mA cm-2. Meanwhile, the water-splitting cell setup with an anode of Ni0.5Se for the HER and a cathode of Ni0.75Se for the OER exhibits a considerable performance with low decay in activity of 12.9% under continuous polarization for 10 h. These results suggest the promising potential of nickel selenide nanocrystals as earth-abundant and high-performance electrocatalysts for metal-air batteries and alkaline water splitting.
Ni 2+ Ion-Induced Phase and Morphology Tailoring in Ni x -CuMoSe Nanorod Catalysts for Overall Water Splitting

Yanfei Ha,Tao Zhou,Zan Xu,Xiaoyu Zhu,Xuanye Chen,Zihao Wang,Yongsheng Liu

DOI: https://doi.org/10.1021/acs.inorgchem.4c04302

IF: 4.6

2024-12-04

Inorganic Chemistry

Abstract:Copper molybdenum-based selenides (CuMoSe) as promising hydrogen evolution catalysts have been widely applied in the electrocatalytic splitting of water, while their limited active sites and relatively poor oxygen evolution activity restrict their further application as effective bifunctional electrocatalysts. Here, we report a simple hydrothermal method to fabricate rodlike NiCuMoSe arrays on nickel foam (Ni(x)-CuMoSe/NF), the morphology of which is determined by Ni^(2+) ions because Ni^(2+)...

chemistry, inorganic & nuclear
Three-dimensional-networked Ni-Co-Se nanosheet/nanowire arrays on carbon cloth: A flexible electrode for efficient hydrogen evolution

Zhen Zhang,Yundan Liu,Long Ren,Han Zhang,Zongyu Huang,Xiang Qi,Xiaolin Wei,Jianxin Zhong

DOI: https://doi.org/10.1016/j.electacta.2016.03.186

IF: 6.6

2016-05-01

Electrochimica Acta

Abstract:Transition metal diselenides have been considered as one of the most promising earth-abundant electrocatalysts as alternatives to noble metal for the hydrogen evolution reaction (HER). Here, hierarchically three-dimensional nickel cobalt diselenides (Ni1/3Co2/3Se2) with networked nanowires and nanosheets characteristics have been successfully synthesized. Such morphological features may not only provide large surface area allowing for exposure of more active sites, but also benefit deep electrolyte penetration for electrons and electrolyte ions. The resulting binder-free flexible electrodes with large production yield exhibit superior electrochemical HER activity and excellent durability after potential sweep tests for 1000 cycles. Besides their catalytic activity remain stable for electrolysis over 8h at mixed overpotential. The outstanding electrocatalytic performance makes the present nickel cobalt diselenide as a promising earth-abundant electrocatalyst for HER application.

electrochemistry
Ni(OH)2 nanoparticles encapsulated in conductive nanowire array for high-performance alkaline seawater oxidation

Longcheng Zhang,Jiaqian Wang,Pengyu Liu,Jie Liang,Yongsong Luo,Guanwei Cui,Bo Tang,Qian Liu,Xuedong Yan,Haigang Hao,Meiling Liu,Rui Gao,Xuping Sun

DOI: https://doi.org/10.1007/s12274-022-4391-6

IF: 9.9

2022-04-21

Nano Research

Abstract:Design and development of high-efficiency and durable oxygen evolution reaction (OER) electrocatalysts is crucial for hydrogen production from seawater splitting. Herein, we report the in situ electrochemical conversion of a nanoarray of Ni(TCNQ)2 (TCNQ = tetracyanoquinodimethane) on graphite paper into Ni(OH)2 nanoparticles confined in a conductive TCNQ nanoarray (Ni(OH)2-TCNQ/GP) by anode oxidation. The Ni(OH)2-TCNQ/GP exhibits high OER performance and demands overpotentials of 340 and 382 mV to deliver 100 mA·cm−2 in alkaline freshwater and alkaline seawater, respectively. Meanwhile, the Ni(OH)2-TCNQ/GP also demonstrates steady long-term electrochemical durability for at least 80 h under alkaline seawater.

materials science, multidisciplinary,chemistry, physical,physics, applied,nanoscience & nanotechnology
Atomic Heterointerface Engineering of Nickel Selenide Confined Nickel Molybdenum Nitride for High‐performance Solar‐driven Water Splitting

Jingqiang Wang,Duy Thanh Tran,Kai Chang,Sampath Prabhakaran,Do Hwan Kim,Nam Hoon Kim,Joong Hee Lee

DOI: https://doi.org/10.1002/eem2.12526

2022-09-23

Abstract:A heterostructured electrocatalyst of small NiSe2 nanoparticles confined NiMoN nanorods (NiSe2–NPs/NiMoN–NRs) is prepared to accelerate both the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) in a same alkaline medium. The synergistic effects caused by the combination of merits derived from NiSe2 and NiMoN phases trigger an optimum electronic structure with high density of state at near Fermi level and enhance adsorption free energy, thereby resulting in excellent catalytic activities and strengthened working stability. The catalyst requires a low overpotential of 58 mV for HER and 241 mV for OER to reach 10 mA cm‐2 in 1.0 M KOH electrolyte. A two‐electrode electrolyzer based on the developed catalyst shows outstanding cell voltage of 1.51 V and 1.46 V to reach 10 mA cm‐2 in 1.0 M and 30wt% KOH solution at 25 °C for overall water splitting, respectively. In addition, the solar‐driven water splitting process delivers a high solar‐to‐H2 conversion efficiency of ∼18.4%, impressively unveiling that the developed bifunctional catalyst is highly potential for overall water splitting to produce green hydrogen fuel.

materials science, multidisciplinary
Nickel Diselenide Ultrathin Nanowires Decorated with Amorphous Nickel Oxide Nanoparticles for Enhanced Water Splitting Electrocatalysis

Haoyi Li,Shuangming Chen,Haifeng Lin,Xiaobin Xu,Haozhou Yang,Li Song,Xun Wang

DOI: https://doi.org/10.1002/smll.201701487

IF: 13.3

2017-01-01

Small

Abstract:Well-designed hybrid materials based on noble metal-free elements have great potential to generate hydrogen (H-2) and oxygen (O-2) sustainably via overall water splitting for developing practical energy-related technologies. Herein, an accessible method is presented to synthesize nickel diselenide (NiSe2) ultrathin nanowires decorated with amorphous nickel oxide nanoparticles (NiOx NPs) as multifunctional electrocatalysts (NSWANs) for hydrogen and oxygen evolution reaction (HER and OER). The NSWANs exhibit quite low HER and OER overpotentials of 174 and 295 mV, respectively, holding the current density of 20 mA cm(-2) for 24 h continuous operations in alkaline media. Meanwhile, a cell voltage of 1.547 V at the current density of 10 mA cm(-2) for overall water splitting has been achieved by the NSWANs for the practical application, which could maintain fascinating activity of 20 mA cm(-2) for 72 h without degradation. The decorated NiOx NPs not only prevent the NiSe2 from further oxidation but also expose requisite active sites for electrocatalytic process. It is believed that this study may provide a valuable strategy to design high-efficiency electrocatalysts and expand the applications of selenide-based materials.
Nanosheet arrays derived from ZIF-67 grown on three-dimensional frameworks for electrocatalytic oxygen evolution reaction

Jiangyan Dang,Jingjing Qiu,Xiaoying Zhang,Jingping Zhang

DOI: https://doi.org/10.1039/d4dt02635g

IF: 4

2024-12-04

Dalton Transactions

Abstract:Hydrogen energy has become one of the most promising substitutes for conventional fuels because of its high calorific value and green and renewable advantages. Among various hydrogen production strategies, the water splitting hydrogen production strategy stands out. Therefore, it is very important to develop efficient and cheap oxygen evolution reaction (OER) electrocatalyst for hydrogen production by electrolysis of water. In this work, nickel selenide grown on nickel foam (NF) with good electrical conductivity and excellent catalytic performance, i.e. NiSe x /NF, was selected as the three-dimensional conducting substrate, and the active material ZIF-67 was successfully compounded on the conductive substrate by using the in-situ growth strategy. A series of self-supporting materials ZIF-67/NiSe x /NF were obtained, which can be directly used as the working electrode for electrocatalysis OER. The self-supporting material ZIF-67/NiSe x /NF-1 can achieve a low overpotential of 353 mV at a current density of 100 mA cm −2 with a small Tafel slope of 107 mV dec −1 , and excellent stability for 55 hours of continuous OER at a current density of 50 mA cm −2 in an alkaline medium. Benefiting from the unique layered structure and the synergy between Co and Se optimizing the electronic structure, ZIF-67/NiSe x /NF-1 directly using as the electrode shows exceptional OER catalytic performance at high current density.

chemistry, inorganic & nuclear
In Situ Synthesis of Nanorod Arrays of Nickel–Molybdenum Nitrides as Stable Electrocatalysts for Hydrogen Evolution Reactions

Liuyu Jia,Jing Li,Xiaorui Yu,Lizhi Feng,Liu Yang,Yiyan Yang,Wenfeng Ye,Baodan Liu

DOI: https://doi.org/10.1021/acsanm.2c04496

IF: 6.14

2023-01-13

ACS Applied Nano Materials

Abstract:The development of cheap and highly active electrocatalysts for efficient water splitting is crucial for the production of green hydrogen at a low cost. In this work, we proposed a two-step method including hydrothermal and nitridation reactions to in situ synthesize NiMoN nanorod arrays with abundant active sites and a fast electron transfer rate on nickel foam substrate. The optimal tailoring of the Ni/Mo ratio leads to a high concentration of active Mo3+ species and suitable Ni doping content in the NiMoN catalyst, which shows superior hydrogen evolution reaction performance. The overpotentials at the current densities of 10 and 100 mA/cm2 are only 20 and 46 mV, which are better than those of the most reported NiMoN-based catalysts and even the commercial benchmark material of Pt/C. Additionally, the electrocatalyst also shows excellent long-term stability after 24 h tests at densities of 10 and 100 mA/cm2, possessing great potential for industrial applications for water splitting to produce hydrogen.

materials science, multidisciplinary,nanoscience & nanotechnology
Co-doped Ni3S2 nanosheet array: A high-efficiency electrocatalyst for alkaline seawater oxidation

Meng Yue,Xun He,Shengjun Sun,Yuntong Sun,Mohamed S. Hamdy,Mhamed Benaissa,Alsamani A. M. Salih,Jun Liu,Xuping Sun,Liu, Jun

DOI: https://doi.org/10.1007/s12274-023-6002-6

IF: 9.9

2023-08-02

Nano Research

Abstract:Developing efficient and durable oxygen evolution reaction (OER) catalysts holds great promise for green hydrogen production via seawater electrolysis, but remains a challenge. Herein, we report a Co-doped Ni 3 S 2 nanosheet array on Ni foam (Co-Ni 3 S 2 /NF) as a high-efficiency OER electrocatalyst for seawater. In alkaline conditions, Co-Ni 3 S 2 /NF requires an overpotential of only 368 mV to drive 100 mA·cm −2 , superior to Ni 3 S 2 /NF (385 mV). Besides, it exhibits at least 50-h continuous electrolysis.

materials science, multidisciplinary,chemistry, physical,physics, applied,nanoscience & nanotechnology
Hydrothermal Nickel Selenides as Efficient Electrodes in Alkaline Media: Application to Supercapacitors and Methanol Oxidation Reaction

Jiaojiao Ren,Yong Zhang,Junshan Li,Junfeng Liu,Jiwei Hu,Chaochao Li,Yun Ke,Jun Zhao,Andreu Cabot,Bin Tang

DOI: https://doi.org/10.1039/d4dt02472a

IF: 4

2024-10-26

Dalton Transactions

Abstract:The advancement of active electrochemical materials is pivotal for enhancing energy conversion and storage technologies, essential for a sustainable future. Furthermore, achieving cost-effective technologies necessitates avoiding the use of noble metals and low-throughput processes that require high vacuum or high temperatures. Herein, we detail a simple solution-based protocol to obtain a series of phase-controlled nickel selenide nanomaterials. The electrochemical performance of these materials, influenced by the phase and morphology, is further analyzed. To showcase the application of these materials, two technologies are considered; i) supercapacitors; and ii) methanol oxidation reaction (MOR). Specifically, the Ni3Se4-based electrode in 1 M KOH shows an initial specific capacitance of 1903.5 and F g 1 at a discharge current of 0.1 mA and displays notable stability for over 3000 cycles. Furthermore, in an alkaline medium with methanol, this electrode produces a current density of 95.5 mA cm 2, facilitating methanol-to-formate conversion with a Faradaic efficiency of up to 95.7% during a continuous 20-hour test. This research underscores the potential of nickel selenides nanomaterials in driving the next generation of energy storage and conversion technologies.

chemistry, inorganic & nuclear
Selenium doped nickel nanosheet array for oxygen evolution reaction

Min Liu,Yu-Yang Sun,Yu-Xun Zhu,Lian-Kui Wu,Mei-Yan Jiang,Guang-Ya Hou,Yi-Ping Tang

DOI: https://doi.org/10.1016/j.ijhydene.2020.11.141

IF: 7.2

2021-02-01

International Journal of Hydrogen Energy

Abstract:Developing an oxygen evolution reaction electrocatalyst with low cost, abundant reserves and excellent performance is essential for the large scale application of renewable hydrogen energy. Herein, a selenium doped hierarchical Ni-based electrocatalyst was fabricated. Nickel nanosheet array (NNA) was firstly electrodeposited on stainless steel, and then selenium was doped in the NNA to form a hierarchical nanosheet structure via a hydrothermal process. The effect of hydrothermal temperature and duration on the OER performance were investigated. Results shown that after selenization at 140 °C for 12 h, the NNA electrodeposited for 30 min performed best OER performance with a current density of 50 mA cm−2 at overpotential of 365 mV and a small Tafel slope of about 34 mV dec−1. This work provides a valuable strategy to design high efficiency electrocatalysts and shows the universality of selenization for improving catalytic performance.

energy & fuels,electrochemistry,chemistry, physical

In Situ Growth of Nickel Selenide Nanowire Arrays on Nickel Foil for Methanol Electro-Oxidation in Alkaline Media

Solution‐Liquid‐Solid Synthesis of Hexagonal Nickel Selenide Nanowire Arrays with a Nonmetal Catalyst

Three‐Dimensionally Arranged NiSe2 Nanosheets as an Efficient Electrocatalyst for Methanol Electrooxidation Reaction

In-situ fabrication of NixSey/MoSe2 hollow rod array for enhanced catalysts for efficient hydrogen evolution reaction

NiSe-modified CoMoO 4 nanosheets as bifunctional electrocatalysts for hydrogen and oxygen evolution reactions

In situ growth of MoSe2 nanosheets array on Mo foil: An efficient and durable hydrogen evolution electrocatalyst

Hierarchical NiSe@Ni nanocone arrays electrocatalyst for oxygen evolution reaction

Selenate promoted stability improvement of nickel selenide nanosheet array with an amorphous NiOOH layer for seawater oxidation

Self-supported ternary Ni-S-Se nanorod arrays as highly active electrocatalyst for hydrogen generation in both acidic and basic medium：experiment investigation and DFT calculation.

Direct growth of NiCo2O4 nanostructures on conductive substrates with enhanced electrocatalytic activity and stability for methanol oxidation

Controllable Synthesis of Ni xSe (0.5 ≤ x ≤ 1) Nanocrystals for Efficient Rechargeable Zinc-Air Batteries and Water Splitting

Ni 2+ Ion-Induced Phase and Morphology Tailoring in Ni x -CuMoSe Nanorod Catalysts for Overall Water Splitting

Three-dimensional-networked Ni-Co-Se nanosheet/nanowire arrays on carbon cloth: A flexible electrode for efficient hydrogen evolution

Ni(OH)2 nanoparticles encapsulated in conductive nanowire array for high-performance alkaline seawater oxidation

Atomic Heterointerface Engineering of Nickel Selenide Confined Nickel Molybdenum Nitride for High‐performance Solar‐driven Water Splitting

Nickel Diselenide Ultrathin Nanowires Decorated with Amorphous Nickel Oxide Nanoparticles for Enhanced Water Splitting Electrocatalysis

Nanosheet arrays derived from ZIF-67 grown on three-dimensional frameworks for electrocatalytic oxygen evolution reaction

In Situ Synthesis of Nanorod Arrays of Nickel–Molybdenum Nitrides as Stable Electrocatalysts for Hydrogen Evolution Reactions

Co-doped Ni3S2 nanosheet array: A high-efficiency electrocatalyst for alkaline seawater oxidation

Hydrothermal Nickel Selenides as Efficient Electrodes in Alkaline Media: Application to Supercapacitors and Methanol Oxidation Reaction

Selenium doped nickel nanosheet array for oxygen evolution reaction