Abstract:The DC microgrid is connected to the AC utility by parallel bidirectional power converters (BPCs) to import/export large power, whose control directly affects the performance of the grid-connected DC microgrid. Much work has focused on the hierarchical control of the DC, AC, and hybrid microgrids, but little has considered the hierarchical control of multiple parallel BPCs that directly connect the DC microgrid to the AC utility. In this paper, we propose a hierarchical control for parallel BPCs of a grid-connected DC microgrid. To suppress the potential zero-sequence circulating current in the AC side among the parallel BPCs and realize feedback linearization of the voltage control, a d - q -0 control scheme instead of a conventional d - q control scheme is proposed in the inner current loop, and the square of the DC voltage is adopted in the inner voltage loop. DC side droop control is applied to realize DC current sharing among multiple BPCs at the primary control level, and this induces DC bus voltage deviation. The quantified relationship between the current sharing error and DC voltage deviation is derived, indicating that there is a trade-off between the DC voltage deviation and current sharing error. To eliminate the current sharing error and DC voltage deviation simultaneously, slope-adjusting and voltage-shifting approaches are adopted at the secondary control level. The proposed tertiary control realizes precise active and reactive power exchange through parallel BPCs for economical operation. The proposed hierarchical control is applied for parallel BPCs of a grid-connected DC microgrid and can operate coordinately with the control for controllable/uncontrollable distributional generation. The effectiveness of the proposed control method is verified by corresponding simulation tests based on Matlab/Simulink, and the performance of the hierarchical control is evaluated for practical applications.

Design and realization of a bipolar HVDC control system

Design and Simulation of a PFM-PWM Hybrid Controller for DCDC Converter with CLLC Topology

Analyses and Design of a High Power Bidirectional 48V-12V DCDC Converter System for Electric Vehicle Application.

Distributed Control System and Two-layer Voltage Balancing Method for Large-scale Modular Multilevel Converters

A Control System for Large-Scale Modular Multilevel Converters.

Decentralized DC Voltage and Power Sharing Control of the Parallel Grid Converters in Multi-Terminal DC Power Integration System

Control design of multi-terminal HVDC based on modular multilevel converter

Hierarchical control for parallel bidirectional power converters of a grid-connected DC microgrid

Cascaded H7 Current Source Converter Based Power Transmission System And Fault Analysis

Control Strategy Research Of Vsc Based Multiterminal Hvdc System

Design and Implementation of a Universal System Control Strategy Applicable to VSC-HVDC Systems

Study and design of main circuit parameters for ±800 kv/7500 MW DC power transmission project from Xiluodu to Zhexi

A Monopolar Symmetrical Hybrid Cascaded DC/DC Converter for HVDC Interconnections

Power and Voltage Control Based on DC Offset Injection for Bipolar Low-voltage DC Distribution System

Design of voltage balancing control circuit for series connected HV-IGBTs

A control strategy for three-level VSC-HVDC system

Design of HVDC Supplementary Controller Based on Extension Control Strategy

Control Design for VSC-HVDC Supplying Passive Network

Hierarchical Control System of Modular Multilevel Converter Used in High-Voltage Direct Current Transmission

An Extended Bipole HVDC Structure With Three Wires for Conversion of AC Lines to HVDC

Topology and control of a novel hybrid HVDC circuit breaker with self-powered capability