Temperature-Dependent Hysteresis Effects in Perovskite-Based Solar Cells

Luis K. Ono,Sonia R. Raga,Shenghao Wang,Yuichi Kato,Yabing Qi

DOI: https://doi.org/10.1039/c4ta04969a

IF: 11.9

2015-01-01

Journal of Materials Chemistry A

Abstract:Time- and temperature-dependent photocurrent transient analysis suggests that hysteresis effects are associated with multiple charging–discharging processes in perovskite solar cells.

What problem does this paper attempt to address?

Hysteresis Related to Ion Migration Rather Than Ferroelectric Polarization in MAPbI3

Yihui Zou,Yi Ding,Haihua Hu,Jingji Zhang,Huilin Li,Ping Lin,Peng Wang,Xiaoping Wu,Lingbo Xu,Can Cui

DOI: https://doi.org/10.1063/5.0222917

IF: 4

2024-01-01

Applied Physics Letters

Abstract:Understanding ferroelectric characteristic is crucial, especially for elucidating the existence of ferroelectric and its relationship with hysteresis in hybrid organic–inorganic perovskites. Our focus is to evaluate the ferroelectric properties of MAPbI3 perovskite films by suppressing the rotation of the MA+ ions through the substitution of TMA+ cations. Our findings indicate that both MAPbI3 and MA0.85TMA0.15PbI3 exhibit non-ferroelectric properties at room temperature, which persist even after external polarization treatment. Further analysis reveals that the hysteresis in J–V characteristics is associated with ion migration phenomena. The external polarization treatment aids in releasing electrons from defect states, enabling them to revert to their original lattice sites. As a result, devices subjected to polarization treatment exhibit reduced hysteresis and enhanced photovoltaic performance.
On the Origin of Hysteresis in Perovskite Solar Cells

Yiliang Wu,Heping Shen,Daniel Walter,Daniel Jacobs,The Duong,Jun Peng,Liangcong Jiang,Yi‐Bing Cheng,Klaus Weber,Yi-Bing Cheng

DOI: https://doi.org/10.1002/adfm.201602231

IF: 19

2016-08-08

Advanced Functional Materials

Abstract:The origin of hysteresis behavior is probed in perovskite solar cells (PSCs) with simultaneous measurements of cell open circuit voltage ( V oc ) and photoluminescence intensity over time following illumination of the cell. It is shown, for the first time, that the transient changes in terminal voltage and luminescent intensity do not follow the relationship that would be predicted by the generalized Plank radiation law. A mechanism is proposed based on the presence of a resistive barrier to majority carrier flow at the interface between the perovskite film and the electron or hole transport layer, in combination with significant interface recombination. This results in a decoupling of the internal quasi‐Fermi level separation and the externally measured voltage. A simple numerical model is used to provide in‐principle validation for the proposed mechanism and it is confirmed that mobile ionic species are a likely candidate for creating the time‐varying majority carrier bottleneck by its reduced conductivity. The findings show that the V oc of PSCs may be lower than the limit imposed by the cell luminescence efficiency, even under steady‐state conditions.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
A Study of Hysteresis in Perovskite Solar Cell

Qiaojing Yan,Xianfeng Rui,Heng Li,Dapeng Yu,Qing Zhao

DOI: https://doi.org/10.1504/ijnm.2016.079231

2016-01-01

International Journal of Nanomanufacturing

Abstract:Hybrid lead-halide perovskite solar cells (PSCs) have become the hot spot in photovoltaic domain since 2012. Although perovskite solar cells exhibit high power conversion efficiencies (PCE), some unsolved issues remain in the measurement of device performance, especially the abnormal hysteresis in current-voltage scan. The hysteresis phenomena result in the overstatement of the performance of PSCs during backward scan, which starts from the bias higher than open voltage and sweep to voltage below zero. In steady output, the stabilised PCE is lower than the dynamic outcome, such as the maximum power point in the I-V curve. The origin of this abnormal hysteresis is under debate. Here, we introduced a model to explain the dependence of I-V measurements on scan history. According to computational simulations using semiconductor transport theories, we found that the experimental results were consistent with the model based on the polarisation of perovskite materials. The bias-induced polarisation affects both the heterojunction resistance and the magnitude of light-generated current. By analysing current results, we supports the view that polarisation is caused by internal ion migration rather than ferroelectricity.
Hysteresis Modeling of Perovskite Solar Cells by an Equivalent Circuit Model

Ting Xu,Wei E. I. Sha,Zishuai Wang

DOI: https://doi.org/10.23919/aces-china52398.2021.9581618

2021-01-01

Abstract:A comprehensive equivalent circuit model is developed to investigate the surface recombination, bulk recombination, shunt resistance, series resistance and the abnormal hysteresis effect for perovskite solar cells. By comparing the introduced model and the ionic drift-diffusion model, two typical capacitance expressions are summarized to characterize the hysteresis. The proposed equivalent circuit model together with typical capacitance expressions reveals the hidden device physics of solar cells, being a valuable synthesis tool for device simulation and analysis.
New Insights into the Origin of Hysteresis Behavior in Perovskite Solar Cells

Xin Li,Yichao Wang,Meiqian Tai,Xingyue Zhao,Youchen Gu,Jianhua Han,Heping Shen,Jianbao Li,Hong Lin

DOI: https://doi.org/10.1039/c8cp01432a

2018-01-01

Abstract:Perovskite solar cells (PSCs) have received tremendous attention due to their stunning progress in photovoltaic performance. The hysteresis behavior, however, is one of the major concerning issues accompanying the development of PSCs. In this context, we propose a new mechanism that explains the origin of hysteresis behavior by analyzing the electrical processes after changing the external electrical bias: the compensating electric field to the scanning voltage induced by drifting carriers. This is further verified by experiments, where we observed much reduced hysteresis in the current density-voltage (J-V) characteristics for the PSCs based on a thinner perovskite layer, which is a result of more evenly distributed electrons and holes. Moreover, light illumination with different wavelengths was applied to vary the initial carrier distribution inside the perovskite layer. We found that J-V curves when illuminating the device with longer wavelengths exhibited diminished hysteresis, which could be a result of more evenly generated carriers due to a smaller absorptivity than that with short wavelength illumination. Based on the proposed model, three key factors affecting the hysteresis behavior were pointed out, including the initial carrier distribution, the carrier transport properties in the perovskite layer, and the carrier extraction properties at the interfaces. Strategies to construct hysteresis-free and stable PSCs have thus been accordingly proposed.
Light illumination and temperature-induced current–voltage hysteresis in single-crystal perovskite photodiodes

Juan-Juan Zhou,Rong-Zheng Ding,Ying-Quan Peng,Chang-Feng Gu,Zhuo-Li Zhou,Wen-Li Lv,Su-Nan Xu,Lei Sun,Yi Wei,Ying Wang

DOI: https://doi.org/10.1039/d0ce01676d

IF: 3.756

2021-01-01

CrystEngComm

Abstract:Recently, current–voltage ( IV ) hysteresis, which is more frequently observed in thin film perovskite solar cells, has been intensively studied due to the destruction of data accuracy in device measurement.

chemistry, multidisciplinary,crystallography
Insights of Hysteresis Behaviors in Perovskite Solar Cells from a Mixed Drift-Diffusion Model Coupled with Recombination

Chongqiu Yang,Xiaobiao Shan,Tao Xie

DOI: https://doi.org/10.3390/photonics7030047

IF: 2.536

2020-07-03

Photonics

Abstract:Hysteresis in perovskite solar cells is a notorious issue limiting its development in stability, reproducibility and efficiency. Ions’ migration coupled with charges’ recombination are indispensable factors to generate the hysteretic curves on the basis of experimental and theoretical calculation studies, however, the underlying physical characteristics are rarely clarified. Here, a mixed electronic-ionic drift-diffusion model combined with bulk and interfacial recombination is investigated. Positive and negative ion species could drift to and accumulate at interfaces between the perovskite/transport layers, influencing internal electric potential profiles and delaying the charges’ ejection to the transport layers. The charges might recombine spontaneously or trap-assisted, reducing the total amount of electrons and holes collected in the external circuit, leading to a diminished photocurrent. Moreover, our calculations indicate that an appropriate measurement protocol is really essential to evaluate the device performance precisely and to suppress J–V hysteresis. Meanwhile, a negligible hysteretic loop could be obtained by balancing the material properties of the transport layers and restraining the ions mobility in the perovskite layer.

optics
Circuit modeling and analysis of hysteresis effect of perovskite photovoltaic cells

Shengxue Tang,Jinjing Yan,Li Chen,Wenyu Zhang,Liqiang Tan

DOI: https://doi.org/10.1016/j.solmat.2024.113182

IF: 6.9

2024-09-26

Solar Energy Materials and Solar Cells

Abstract:Perovskite solar cells are an important development direction for future solar photovoltaic technology, with advantages such as low cost and high efficiency. However, they commonly suffer from hysteresis effects, which severely impacts the efficiency and lifespan of the cells. This paper analyzes the mechanism of hysteresis effects and the characteristics of the J-V curve of the cells. From a circuit perspective, this paper proposes a circuit modeling method for the J-V characteristics of hysteresis effects in perovskite photovoltaic cells. By utilizing the dynamic properties of nonlinear capacitors, the hysteresis model of perovskite photovoltaic cells is constructed, and the general expression of the model is derived. This model can simulate common hysteresis curves of different perovskite photovoltaic cells under various conditions. Simulation analysis of parameters' effects on hysteresis effects is conducted using the model. Experimental validation confirms that the circuit model accurately replicates the hysteresis effects observed in individual cells. By finely adjusting parameters, the model can efficiently generate a wide array of hysteresis effects, offering exceptional precision and versatility. This capability facilitates the precise simulation of hysteresis phenomena observed in perovskite photovoltaic cells.

materials science, multidisciplinary,physics, applied,energy & fuels
Accelerating the Assessment of Hysteresis in Perovskite Solar Cells

Enrique H Balaguera,Juan Bisquert

DOI: https://doi.org/10.1021/acsenergylett.3c02779

2024-01-17

Abstract:Halide perovskite materials have reached important milestones in the photovoltaic field, positioning them as realistic alternatives to conventional solar cells. However, unavoidable kinetic phenomena have represented a major concern for reliable steady-state performance assessment from standard current-voltage measurements. In particular, the dynamic hysteresis of current-voltage curves requires relatively long stabilization to achieve a credible figure for the power conversion efficiency. Hysteresis is caused by complex current transient phenomena that become active during staircase voltammetry. Here, we address the root of this problem. We pinpoint the dynamic characteristics behind the slow transient responses to strategically predict a minimum time delay and thus estimate the power conversion efficiency under steady-state conditions. Circuit-element analysis and impedance spectroscopy confirm our predictions based on an advanced transient study. Our results fundamentally explore the possibility of reducing data time acquisition in a reliable performance assessment, providing disruptive solutions and perspectives toward systematic production of photovoltaic perovskites.
Modulating Hysteresis of Perovskite Solar Cells by a Poling Voltage

Xiaobing Cao,Yahui Li,Can Li,Fei Fang,Youwei Yao,Xian Cui,Jinquan Wei

DOI: https://doi.org/10.1021/acs.jpcc.6b05775

2016-01-01

The Journal of Physical Chemistry C

Abstract:Perovskite solar cells have a puzzling phenomenon of current hysteresis. Here, we modulate the hysteresis by applying a poling voltage. Charge accumulations are detected in the perovskite solar cells. Two interacting capacitors are identified through dynamic voltage measurement. We elucidate that the current hysteresis originates mainly from the polarization and depolarization of electric dipoles of CH3NH3+ under an external electric field due to the intrinsic ferroelectric properties of perovskite. The polarization leads to charge accumulation at the surface of perovskite, which establishes a polarization-induced electric field. The polarization-induced electric field affects the charge transport inside the solar cells, resulting in the current hysteresis. The polarization of electric dipoles can be modified by the poling and sweeping voltage, which makes the hysteresis exhibit a history-dependent effect.
Unveiling heterogeneity of hysteresis in perovskite thin films

Zhouyiao Zou,Haian Qiu,Zhibin Shao

DOI: https://doi.org/10.1186/s11671-024-03996-9

2024-03-19

Discover Nano

Abstract:The phenomenon of current–voltage hysteresis observed in perovskite-based optoelectronic devices is a critical issue that complicates the accurate assessment of device parameters, thereby impacting performance and applicability. Despite extensive research efforts aimed at deciphering the origins of hysteresis, its underlying causes remain a subject of considerable debate. By employing nanoscale investigations to elucidate the relationship between hysteresis and morphological characteristics, this study offers a detailed exploration of photocurrent–voltage hysteresis at the nanoscale within perovskite optoelectronic devices. Through the meticulous analysis of localized I – V curve arrays, our research identifies two principal hysteresis descriptors, uncovering a predominantly inverted hysteresis pattern in 87% of the locations examined. This pattern is primarily attributed to the energetic barrier encountered at the interface between the probe and the perovskite material. Our findings underscore the pronounced heterogeneity and grain-dependent variability inherent in hysteresis behavior, evidenced by an average Hysteresis Index value of 0.24. The investigation suggests that the localized hysteresis phenomena cannot be exclusively attributed to either photocharge collection processes or organic cation migration at grain boundaries. Instead, it appears significantly influenced by localized surface trap states, which play a pivotal role in modulating electron and hole current dynamics. By identifying the key factors contributing to hysteresis, such as localized surface trap states and their influence on electron and hole current dynamics, our findings pave the way for targeted strategies to mitigate these effects. This includes the development of novel materials and device architectures designed to minimize energy barriers and enhance charge carrier mobility, thereby improving device performance and longevity. This breakthrough in understanding the microscale mechanisms of hysteresis underscores the critical importance of surface/interface defect trap passivation in mitigating hysteretic effects, offering new pathways for enhancing the performance of perovskite solar cells.
Influences of Dielectric Constant and Scan Rate to Hysteresis Effect in Perovskite Solar Cell: Simulation and Experimental Analyses

Jun-Yu Huang,You-Wei Yang,Wei-Hsuan Hsu,En-Wen Chang,Mei-Hsin Chen,Yuh-Renn Wu

DOI: https://doi.org/10.21203/rs.3.rs-1182669/v1

2021-12-28

Abstract:Abstract In this work, perovskite solar cells (PSCs) with different transport layers were fabricated to understand the hysteresis phenomenon under a series of scan rates. The experimental results show that the hysteresis phenomenon would be affected by the dielectric constant of transport layers and scan rate significantly. To explain this, a modified Poisson and drift-diffusion solver coupled with a fully time-dependent ion migration model is developed to analyze how the ion migration affects the performance and hysteresis of PSCs. The modeling results show that the most crucial factor in the hysteresis behavior is the built-in electric field of the perovskite. The non-linear hysteresis curves are demonstrated under different scan rates, and the mechanism of the hysteresis behavior is explained. Additionally, other factors contributing to the degree of hysteresis are determined to be the degree of degradation in the perovskite material, the quality of the perovskite crystal, and the materials of the transport layer, which corresponds to the total ion density, carrier lifetime of perovskite, and the dielectric constant of the transport layer, respectively. Finally, it was found that the dielectric constant of the transport layer is a key factor affecting hysteresis in perovskite solar cells.
Influences of dielectric constant and scan rate on hysteresis effect in perovskite solar cell with simulation and experimental analyses

Jun-Yu Huang,You-Wei Yang,Wei-Hsuan Hsu,En-Wen Chang,Mei-Hsin Chen,Yuh-Renn Wu

DOI: https://doi.org/10.1038/s41598-022-11899-x

IF: 4.6

2022-05-14

Scientific Reports

Abstract:In this work, perovskite solar cells (PSCs) with different transport layers were fabricated to understand the hysteresis phenomenon under a series of scan rates. The experimental results show that the hysteresis phenomenon would be affected by the dielectric constant of transport layers and scan rate significantly. To explain this, a modified Poisson and drift-diffusion solver coupled with a fully time-dependent ion migration model is developed to analyze how the ion migration affects the performance and hysteresis of PSCs. The modeling results show that the most crucial factor in the hysteresis behavior is the built-in electric field of the perovskite. The non-linear hysteresis curves are demonstrated under different scan rates, and the mechanism of the hysteresis behavior is explained. Additionally, other factors contributing to the degree of hysteresis are determined to be the degree of degradation in the perovskite material, the quality of the perovskite crystal, and the materials of the transport layer, which corresponds to the total ion density, carrier lifetime of perovskite, and the dielectric constant of the transport layer, respectively. Finally, it was found that the dielectric constant of the transport layer is a key factor affecting hysteresis in perovskite solar cells.

multidisciplinary sciences
Interfacial Oxygen Vacancies as a Potential Cause of Hysteresis in Perovskite Solar Cells

Fan Zhang,Wei Ma,Haizhong Guo,Yicheng Zhao,Xinyan Shan,Kuijuan Jin,He Tian,Qing Zhao,Dapeng Yu,Xinghua Lu,Gang Lu,Sheng Meng

DOI: https://doi.org/10.1021/acs.chemmater.5b04019

IF: 10.508

2016-01-26

Chemistry of Materials

Abstract:Organometal halide perovskite solar cells (PSCs) have emerged as one of the most promising photovoltaic technologies with efficiencies exceeding 20.3%. However, device stability problems including hysteresis in current–voltage scans must be resolved before the commercialization of PSCs. Transient absorption measurements and first-principles calculations indicate that the migration of oxygen vacancies in the TiO2 electrode under electric field during voltage scans contributes to the anomalous hysteresis in PSCs. The accumulation of oxygen vacancies at the electrode/perovskite interface slows down charge extraction while significantly speeding up charge recombination at the interface. Moreover, nonadiabatic molecular dynamics simulations reveal that the charge recombination rates at the interface depend sensitively (with 1 order of magnitude difference) on the locations of oxygen vacancies. By intentionally reducing oxygen vacancies in the TiO2 electrode, we substantially suppress unfavorable hysteresis in the PSC devices. This work establishes a firm link between microscopic interfacial structure and macroscopic device performance of PSCs, providing important clues for future device design and optimization.

materials science, multidisciplinary,chemistry, physical
On the Current–Voltage Hysteresis in Perovskite Solar Cells: Dependence on Perovskite Composition and Methods to Remove Hysteresis

Dong‐Ho Kang,Nam‐Gyu Park

DOI: https://doi.org/10.1002/adma.201805214

IF: 29.4

2019-02-18

Advanced Materials

Abstract:Current-density-voltage (J-V) hysteresis in perovskite solar cells (PSCs) is a critical issue because it is related to power conversion efficiency and stability. Although parameters affecting the hysteresis have been already reported and reviewed, little investigation is reported on scan-direction-dependent J-V curves depending on perovskite composition. This review investigates J-V hysteric behaviors depending on perovskite composition in normal mesoscopic and planar structure. In addition, methodologies toward hysteresis-free PSCs are proposed. There is a specific trend in hysteresis in terms of J-V curve shape depending on composition. Ion migration combined with nonradiative recombination near interfaces plays a critical role in generating hysteresis. Interfacial engineering is found to be an effective method to reduce the hysteresis; however, bulk defect engineering is the most promising method to remove the hysteresis. Among the studied methods, KI doping is proved to be a universal approach toward hysteresis-free PSCs regardless of perovskite composition. It is proposed from the current studies that engineering of perovskite film near the electron transporting layer (ETL) and the hole transporting layer (HTL) is of vital importance for achieving hysteresis-free PSCs and extremely high efficiency.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
The Influence of Different Recombination Pathways on Hysteresis in Perovskite Solar Cells with Ion Migration

Biao Li,Kun Chen,Pengjie Hang,Yuxin Yao,Chenxia Kan,Zechen Hu,Ying Wang,Yiqiang Zhang,Deren Yang,Xuegong Yu

DOI: https://doi.org/10.3390/inorganics11020052

2023-01-01

Inorganics

Abstract:The impact of hysteresis on the power conversion efficiency (PCE) of perovskite solar cells (PSCs) still faces uncertainties despite the rapid development of perovskite photovoltaics. Although ion migration in perovskites is regarded as the chief culprit for hysteresis, charge carrier recombination pathways in PSCs are proposed to be necessary for the occurrence of hysteresis. Here, the impact of both bulk recombination and interface recombination on hysteresis in PSCs is investigated via drift–diffusion modeling. The simulation results demonstrate a direct correlation between recombination pathways and hysteresis in PSCs with ion migration. The simulation reveals that recombination pathways in PSCs will react to the variation in charge carrier distribution under different voltage scanning directions induced by ion migration in absorber layers, which leads to hysteresis in PSCs. Moreover, the hysteresis in normal (N-I-P) PSCs with different electron transport layers (ETLs) including sintered SnO2, SnO2 nano crystals and TiO2 is experimentally explored. The results demonstrate that multiple recombination pathways coupled with ion migration can lead to obvious hysteresis in fabricated PSCs which is consistent with simulation results. This work provides great insight into hysteresis management upon composition, additive and interface engineering in PSCs.
Hysteresis and Its Correlation to Ionic Defects in Perovskite Solar Cells

Sandhya Tammireddy,Muhammad N Lintangpradipto,Oscar Telschow,Moritz H Futscher,Bruno Ehrler,Osman M Bakr,Yana Vaynzof,Carsten Deibel

DOI: https://doi.org/10.1021/acs.jpclett.3c03146

IF: 6.888

2024-01-30

The Journal of Physical Chemistry Letters

Abstract:Ion migration has been reported to be one of the main reasons for hysteresis in the current-voltage (J-V) characteristics of perovskite solar cells. We investigate the interplay between ionic conduction and hysteresis types by studying Cs(0.05)(FA(0.83)MA(0.17))(0.95)Pb(I(0.9)Br(0.1))(3) triple-cation perovskite solar cells through a combination of impedance spectroscopy (IS) and sweep-rate-dependent J-V curves. By comparing polycrystalline devices to single-crystal MAPbI(3) devices, we separate...

chemistry, physical,physics, atomic, molecular & chemical,nanoscience & nanotechnology,materials science, multidisciplinary
Targeted suppression of hysteresis effect in perovskite solar cells through the inhibition of cation migration

Shuai Yuan,Feige Lou,Yiyi Li,Hao-Yi Wang,Yi Wang,Xi-Cheng Ai,Jian-Ping Zhang

DOI: https://doi.org/10.1063/5.0145249

IF: 4

2023-03-29

Applied Physics Letters

Abstract:The hysteresis effect is a vital issue in perovskite solar cells that warrants close scrutiny, of which ion migration and the resultant interfacial ion accumulation are widely considered to be the most important origination. However, owing to the lack of specific characterization tools to disentangle the complicated interaction between ions and charge carriers, it is yet unidentified which ionic species govern the hysteresis effect, bringing difficulties in further device optimization. Herein, adopting a home-built circuit-switched transient photoelectric technique, whereby ion migration dynamics can be studied without interference from photogenerated charge carriers, the role of different ions in the photoelectric conversion process is elucidated. As suggested by the experimental results, the hysteresis effect dominantly arises from the migration of organic cations instead of the halide anions and can be well interpreted in terms of the strongly coupled cation–electron pairs. On the basis of these findings, we showcase the effectiveness of suppressing the hysteresis factor by the inhibition of the methylamine cations' migration. The present work can provide targeted and sufficient guidance for the preparation of high-stability and high-efficiency perovskite solar cells.

physics, applied
Fundamentals of Hysteresis in Perovskite Solar Cells: From Structure‐Property Relationship to Neoteric Breakthroughs

Qamar Wali,Muhammad Aamir,Abid Ullah,Faiza Jan Iftikhar,Muhammad Ejaz Khan,Javeed Akhtar,Shengyuan Yang

DOI: https://doi.org/10.1002/tcr.202100150

IF: 6.935

2021-08-21

The Chemical Record

Abstract:Perovskite solar cells (PSC) have shown a rapid increase in efficiency than other photovoltaic technology. Despite its success in terms of efficiency, this technology is inundated with numerous challenges hindering the progress towards commercial viability. The crucial one is the anomalous hysteresis observed in the photocurrent density-voltage (J−V) response in PSC. The hysteresis phenomenon in the solar cell presents a challenge for determining the accurate power conversion efficiency of the device. A detailed investigation of the fundamental origin of hysteresis behavior in the device and its associated mechanisms is highly crucial. Though numerous theories have been proposed to explain the causes of hysteresis, its origin includes slow transient capacitive current, trapping, and de-trapping process, ion migrations, and ferroelectric polarization. The remaining issues and future research required toward the understanding of hysteresis in PSC device is also discussed.

chemistry, multidisciplinary
Numerical analysis of a hysteresis model in perovskite solar cells

Yecheng Zhou,Fuzhi Huang,Yi-Bing Cheng,Angus Gray-Weale

DOI: https://doi.org/10.1016/j.commatsci.2016.09.010

IF: 3.572

2017-01-01

Computational Materials Science

Abstract:Previously, we proposed that the polarization and capacitive charge in CH3NH3PbI3 screens the external electric field that hinders charge transport. We argue here that this screening effect is in significant part responsible for the power conversion characteristics and hysteresis in CH3NH3PbI3 photovoltaic cells. In this paper, we implement capacitive charge and polarization charge into the numerical model that we have developed for perovskite solar cells. Fields induced by these two charges screen the applied hindering field, promote charge transport, and improve solar cell’s performance, especially in solar cells with short diffusion lengths. This is the reason why perovskite solar cells made from simple fabrication methods can achieve high performance. More importantly, with relaxations of capacitive charge and polarization charge, we quantitatively reproduce experimental “anomalous” hysteresis J-V curves. This reveals that both polarization relaxation and ions relaxation could contribute to anomalous hysteresis in perovskite solar cells.

materials science, multidisciplinary

Temperature-Dependent Hysteresis Effects in Perovskite-Based Solar Cells

Hysteresis Related to Ion Migration Rather Than Ferroelectric Polarization in MAPbI3

On the Origin of Hysteresis in Perovskite Solar Cells

A Study of Hysteresis in Perovskite Solar Cell

Hysteresis Modeling of Perovskite Solar Cells by an Equivalent Circuit Model

New Insights into the Origin of Hysteresis Behavior in Perovskite Solar Cells

Light illumination and temperature-induced current–voltage hysteresis in single-crystal perovskite photodiodes

Insights of Hysteresis Behaviors in Perovskite Solar Cells from a Mixed Drift-Diffusion Model Coupled with Recombination

Circuit modeling and analysis of hysteresis effect of perovskite photovoltaic cells

Accelerating the Assessment of Hysteresis in Perovskite Solar Cells

Modulating Hysteresis of Perovskite Solar Cells by a Poling Voltage

Unveiling heterogeneity of hysteresis in perovskite thin films

Influences of Dielectric Constant and Scan Rate to Hysteresis Effect in Perovskite Solar Cell: Simulation and Experimental Analyses

Influences of dielectric constant and scan rate on hysteresis effect in perovskite solar cell with simulation and experimental analyses

Interfacial Oxygen Vacancies as a Potential Cause of Hysteresis in Perovskite Solar Cells

On the Current–Voltage Hysteresis in Perovskite Solar Cells: Dependence on Perovskite Composition and Methods to Remove Hysteresis

The Influence of Different Recombination Pathways on Hysteresis in Perovskite Solar Cells with Ion Migration

Hysteresis and Its Correlation to Ionic Defects in Perovskite Solar Cells

Targeted suppression of hysteresis effect in perovskite solar cells through the inhibition of cation migration

Fundamentals of Hysteresis in Perovskite Solar Cells: From Structure‐Property Relationship to Neoteric Breakthroughs

Numerical analysis of a hysteresis model in perovskite solar cells