Abstract:Laser irradiation is a popular method to produce microtextures on metal surfaces. However, the common laser-produced microtextures were hierarchical (multiscale), which may limit their applicability. In this paper, a method of two-step laser irradiation, combining first-step strong ablation and sequentially second-step gentle ablation, was presented to produce micron-rough surface with single-scale microtextures. The effect of laser fluence on the Ti–6Al–4V surface morphology and wettability were investigated in detail. The morphology results revealed that the microtextures produced using this method gradually evolved from multiscale to single-scale meanwhile from microprotrusions to microholes with increasing the second-step laser fluence from 0.0 to 2.4 J/cm2. The wettability and EDS/XPS results indicated that attributing to the rich TiO2 content and micron roughness produced by laser irradiation, all the two-step laser-irradiated surfaces exhibited superhydrophilicity. In addition, after silanization, all these superhydrophilic surfaces immediately turned to be superhydrophobic with close water contact angles of 155–162°. However, due to the absence of nanotextures, the water-rolling angle on the superhydrophobic surfaces with single-scale microtextures distinctly larger than those with multiscale ones. Finally, using the two-step laser-irradiation method and assisted with silanization, multifunctional superhydrophobic Ti–6Al–4V surfaces were achieved, including self-cleaning, guiding of the water-rolling direction and anisotropic water-rolling angles (like the rice-leaf), etc.

Multifunctional Wettability Patterns Prepared by Laser Processing on Superhydrophobic TiO2 Nanostructured Surfaces.

Bioinspired Patterning with Extreme Wettability Contrast on Tio2 Nanotube Array Surface: A Versatile Platform for Biomedical Applications

Multifunctional Superamphiphobic Tio2 Nanostructure Surfaces with Facile Wettability and Adhesion Engineering

Water Transport Control on A Patterned Superhydrophobic Surface Via Laser Direct Writing

Antiwetting Surfaces: Multifunctional Superamphiphobic TiO2 Nanostructure Surfaces with Facile Wettability and Adhesion Engineering (small 23/2014)

Digital selective fabrication of micro/nano-composite structured TiO2 nanorod arrays by laser direct writing

Nanotube Arrays: Bioinspired Patterning with Extreme Wettability Contrast on TiO2 Nanotube Array Surface: A Versatile Platform for Biomedical Applications (small 17/2013)

Bioinspired TiO2 Nanostructure Films with Special Wettability and Adhesion for Droplets Manipulation and Patterning

Superhydrophobic Surface Preparation and Wettability Transition of Titanium Alloy with Micro/Nano Hierarchical Texture

Superhydrophilic–superhydrophobic Micropattern on TiO2 Nanotube Films by Photocatalytic Lithography

Femtosecond Laser Thermal Accumulation-Triggered Micro-/Nanostructures with Patternable and Controllable Wettability Towards Liquid Manipulating

Nanotube Arrays: in Situ Surface‐Modification‐Induced Superhydrophobic Patterns with Reversible Wettability and Adhesion (adv. Mater. 12/2013)

Controllable construction of ZnO/TiO2 patterning nanostructures by superhydrophilic/superhydrophobic templates

Fabrication of Super-Hydrophobic and Highly Oleophobic Ti-6Al-4 V Surfaces by a Hybrid Method

Fabrication of Superhydrophobic Ti–6Al–4V Surfaces with Single-Scale Micotextures by using Two-Step Laser Irradiation and Silanization

Smart design of wettability-patterned gradients on substrate-independent coated surfaces to control unidirectional spreading of droplets.

Multifunctional surface of titanium alloy with dual-scale hierarchical micro/nanostructures fabricated by femtosecond laser processing

Nature-Inspired Superwettability Achieved by Femtosecond Lasers

Controllable construction of ZnO/TiO 2 patterning nanostructures by superhydrophilic/superhydrophobic templates