Abstract:The highly desirable properties of nitrogen-doped graphene nanomaterial, such as high surface area, good hydrophilicity, and enhanced electrocatalytic activity and charge-transfer property, make it an ideal candidate for electrode materials used in the field of energy conversion and storage. Up to now, methods of synthesizing nitrogen-doped graphene nanomaterials mainly include chemical vapor deposition, thermal annealing graphite oxide with NH3, and graphene treated with nitrogen plasma. However, these methods of producing the nitrogen-doped graphene nanomaterials are either costly for practical applications or involving environmently hazardous reagents, and the full potentials of nitrogen-doped graphene materials are hard to achieve without scalable production at low cost. Therefore, a simple and cost-effective method of producing the nitrogen-doped graphene nanomaterial is desirable. In this paper, nitrogen-doped graphene nanoplatelets are prepared by a simple and eco-friendly mechanochemical pin-grinding process under N2 atmosphere through using natural graphite flake as the precursor at room temperature. The as-prepared nitrogen-doped graphene sample is characterized by X-ray photoelectron spectroscopy, Raman spectra, nitrogen adsorption, SEM, and TEM. The images of SEM and BET (Brunauer-Emmett-Teller) surface area measurements demonstrate an effective and spontaneous delamination of the starting graphite into small graphene nanoplatelets even in the solid state by pin-grinding process. The cleavage of graphitic C-C bonds by pin grinding creates numerous active carbon species, which can directly react with nitrogen. X-ray photoelectron spectroscopy measurements indicate that the active carbon species react with nitrogen to form the aromatic C-N in pyrazole and pyridazine rings at the fresh broken edges of the graphitic frameworks. Both pyrrolic nitrogen and pyridinic nitrogen are at the edge of carbon framework, which can provide chemically active sites to improve the electrochemical performance of carbon material. Electrochemical impedance spectroscopy indicvates that nitrogen-doped graphene nanoplatelets possess excellent electrocatalytic activity for the redox reaction between iodide and triiodide ions, used in dye-sensitized solar cells. The charge-transfer resistance of nitrogen-doped graphene nanoplatelet electrode is 1.1 cm2, which is comparable to that of Pt electrode. The capacitance properties of the as-prepared nitrogen-doped graphene nanoplatelets are also investigated. Cyclic voltammetry and galvanostatic charge-discharge curves show that nitrogen-doped graphene nanoplatelets have good capacitive performance. At a current density of 0.3 A/cm2, the specific capacitance of nitrogen-doped graphene nanoplatelets is 202.8 F/g. The good electrochemical performance of nitrogen-doped graphene nanolplatelet can be attributed to its high surface area and doping nitrogen at the edge. The simple and eco-friendly preparation procedure, low cost, and good electrochemical performance allow the as-prepared nitrogen-doped graphene nanoplatelets to be a promising candidate for the electrode materials in dye-sensitized solar cells and supercapacitors.

Preparation and Electrochemical Performance of Nitrogen-doped Graphene by Intermittent Microwave-assisted Heating for Fuel Cells

Preparation and Electrochemical Characterization of Nitrogen Doped Graphene by Microwave As Supporting Materials for Fuel Cell Catalysts

Rapid Synthesis of Nitrogen-Doped Graphene by Microwave Heating for Oxygen Reduction Reactions in Alkaline Electrolyte

Sulfur and Nitrogen Co-Doped, Few-Layered Graphene Oxide As A Highly Efficient Electrocatalyst for the Oxygen-Reduction Reaction

Pure Pyridinic Nitrogen‐Doped Single‐Layer Graphene Catalyzes Two‐Electron Transfer Process of Oxygen Reduction Reaction

Simple Preparation of Nanoporous Few-Layer Nitrogen-Doped Graphene for Use As an Efficient Electrocatalyst for Oxygen Reduction and Oxygen Evolution Reactions

Synthesis of nitrogen doped graphene with high electrocatalytic activity toward oxygen reduction reaction

Direct Transformation from Graphitic C3N4 to Nitrogen-Doped Graphene: An Efficient Metal-Free Electrocatalyst for Oxygen Reduction Reaction

Facile Preparation of Nitrogen-Doped Graphene As a Metal-Free Catalyst for Oxygen Reduction Reaction

3D Nitrogen-doped Graphene Prepared by Pyrolysis of Graphene Oxide with Polypyrrole for Electrocatalysis of Oxygen Reduction Reaction

Noble-Metal-Free Iron Nitride/Nitrogen-Doped Graphene Composite for the Oxygen Reduction Reaction

Enhancing performance of nitrogen-doped graphene nano-catalyst for oxygen reduction reaction by Ag loading

A novel in situ synthesis of nitrogen-doped graphene with excellent electrocatalytic performance for oxygen reduction reaction

Oxygen Reduction Reaction Mechanism on Nitrogen-Doped Graphene: A Density Functional Theory Study

Formation of N‐doped Graphene and Carbon Nanoparticles Integrated Composite for Efficient Oxygen Reduction Electrocatalysis

Facile Synthesis of N-Doped Graphene-Like Carbon Nanoflakes as Efficient and Stable Electrocatalysts for the Oxygen Reduction Reaction

Nitrogen-Doped Graphene As Efficient Metal-Free Electrocatalyst for Oxygen Reduction in Fuel Cells

Enhancing Pyridinic Nitrogen Level in Graphene to Promote Electrocatalytic Activity for Oxygen Reduction Reaction

Preparation and Electro Chemical P Erformance of Nitrogen-Dop Ed Graphene Nanoplatelets

Nitrogen-Doped Graphene Oxide as Efficient Metal-Free Electrocatalyst in PEM Fuel Cells

Graphitic-N-rich N-doped graphene as a high performance catalyst for oxygen reduction reaction in alkaline solution