Abstract:Microwave vacuum electron devices (MVED) are capable of handling more power in a smaller interaction volume than the solid-state devices. An over-mode high power terahertz backward wave oscillator (BWO) is proposed. The slow wave structure (SWS) is constructed as follow: a series of equidistant annular slots are cut in the inner wall of a cylindrical waveguide. The dispersion relationship of the SWS is theoretically analyzed. The parameters of this structure are optimized by using 2.5D UNIPIC code. The influences of structure parameters and working parameters on the performance of the device are investigated, such as the period number of the SWS, the beam voltage, and the strength of external guiding magnetic field. The numerical results indicate that the frequency of the device is not sensitive to the beam voltage. This is the typical characteristic when the device works at π-mode. under the condition of the electron beam with the voltage of 200 kV, the current of 1100 A, the inner radius of 2 mm, the outer radius of 2.5 mm, and magnetic field of 5 Tesla, the TM 01 mode wave begins to oscillate at 3.5 ns, whose average power is about 30 MW, frequency is 0.147 THz. And an efficiency of 14% is also obtained with a fine spectrum characteristic. The numerical results demonstrate that the over-mode electrodynamic structure can be used to decrease internal electric field strength while avoiding multimode generation and maintaining good spectral purity. © 2009 SPIE.

The Design And Simulation Of The Terahertz Bwo Based On The Discrete Metallic Poles Planar Slow Wave Structure

Design and Analysis of an Overmoded Slow Wave Structure for High Power Terahertz BWO

A Modified Slow-Wave Structure for Backward-Wave Oscillator Design in THz Band

A THz Backward-Wave Oscillator Based on a Double-Grating Rectangular Waveguide

Research on Terahertz Backward-Wave Oscillator Based on Photonic Column Array Slow-Wave Structure

U-Shaped Quasi-Parallel-Plate for Low Voltage Thz Bwo

Design and RF Characterization of the Co-Planar Slow Wave Structure for Millimeter-Wave BWO Applications

Simulation and Design of 1THz Backward Wave Oscillator

Particle simulation on high power terahertz wave generated by backward wave oscillator

1.0 THz Backward-Wave Oscillator Based on Novel Helical Groove Rectangular Waveguide

Numerical Simulation Research on High Power Terahertz Backward Wave Oscillator

A BWO based on novel metamaterial slow-wave structure

Rectangular Grating Slow-Wave Structure with a Slot Embed Electron Beam for High-Power Terahertz Radiation

An Efficiency-Enhanced 0.5-Thz BWO Using Double-Slot Embedded Electron Beams to Drive a Grating Loaded Rectangular Waveguide

An Ultra-Broadband Watt-Level Terahertz BWO Based Upon Novel Sine Shape Ridge Waveguide

A Novel Coplanar Double V-shaped Slow-wave Structure for E-band Backward-wave Oscillator

A Novel Coplanar Slow-Wave Structure for Millimeter-Wave BWO Applications

Performance Evaluation and Experimental Study of a 0.34-THz Folded Waveguide Sheet Beam BWO

A D-Band Backward-Wave Oscillator Based On Quasi-Parallel-Plate Slow-Wave Structure

Design Of An Overmoded Mw-Class Terahertz Backward Wave Oscillator

Continuous-wave Y-band Planar BWO with Wide Tunable Bandwidth