Abstract:Polylactic acid (PLA), a potential alternative material for single use plastics, generally portrays a slow crystallization rate during melt-processing. The use of a nanomaterial such as cellulose nanofibers (CNF) may affect the crystallization rate by acting as a nucleating agent. CNF at a certain wt.% has been evidenced as a good reinforcement material for PLA; nevertheless, there is a lack of information on the correlation between the amount of CNF in PLA that promotes its functionality as reinforcement material, and its effect on PLA nucleation for improving the crystallization rate. This work investigated the nucleation effect of PLA incorporated with CNF at different fiber loading (1–6 wt.%) through an isothermal and non-isothermal crystallization kinetics study using differential scanning calorimetry (DSC) analysis. Mechanical properties of the PLA/CNF nanocomposites were also investigated. PLA/CNF3 exhibited the highest crystallization onset temperature and enthalpy among all the PLA/CNF nanocomposites. PLA/CNF3 also had the highest crystallinity of 44.2% with an almost 95% increment compared to neat PLA. The highest crystallization rate of 0.716 min–1 was achieved when PLA/CNF3 was isothermally melt crystallized at 100 °C. The crystallization rate was 65-fold higher as compared to the neat PLA (0.011 min–1). At CNF content higher than 3 wt.%, the crystallization rate decreased, suggesting the occurrence of agglomeration at higher CNF loading as evidenced by the FESEM micrographs. In contrast to the tensile properties, the highest tensile strength and Young’s modulus were recorded by PLA/CNF4 at 76.1 MPa and 3.3 GPa, respectively. These values were, however, not much different compared to PLA/CNF3 (74.1 MPa and 3.3 GPa), suggesting that CNF at 3 wt.% can be used to improve both the crystallization rate and the mechanical properties. Results obtained from this study revealed the dual function of CNF in PLA nanocomposite, namely as nucleating agent and reinforcement material. Being an organic and biodegradable material, CNF has an increased advantage for use in PLA as compared to non-biodegradable material and is foreseen to enhance the potential use of PLA in single use plastics applications.

Enhanced Crystallization Kinetics of Poly(Lactic Acid) with Carbon Nanotube (cnt) As the Nucleating Agent: an Evaluation Using In-Situ Measurement

Manipulation of Non-Isothermal Crystallization Kinetics of Poly(lactic Acid) Composite Film by a Novel Nucleating Agent

Nonisothermal Crystallization Behavior of Biocomposites from Poly(lactic Acid) and Bamboo Fiber

Enhancing the Non-Isothermal Crystallization Kinetics of Polylactic Acid by Incorporating a Novel Nucleating Agent

The Effect of Composite Nucleating Agent on the Crystallization Behavior of Branched Poly (Lactic Acid)

Improved Yield and Electrical Properties of Poly(Lactic Acid)/Carbon Nanotube Composites by Shear and Anneal

Crystallization Behavior and Water Vapor Permeability of Poly(Lactic Acid) Nanocomposite under Oscillatory Shear

Synergistic Effects of Polyethylene Glycol and Cellulose Nanofibers on the Isothermal and Non-isothermal Crystallization Behaviors of Polylactide

Enhanced nucleation rate of polylactide in composites assisted by surface acid oxidized carbon nanotubes of different aspect ratios.

Exponentially Increased Nucleation Ability for Poly(l-Lactide) by Adding Acid-Oxidized Multiwalled Carbon Nanotubes with Reduced Aspect Ratios

Crystallization Behavior of Biodegradable Poly(l‐lactide)/multiwalled Carbon Nanotubes Nanocomposites from the Amorphous State

Morphology, Rheology and Crystallization Behavior of Polylactide Composites Prepared Through Addition of Five-Armed Star Polylactide Grafted Multiwalled Carbon Nanotubes

More Dominant Shear Flow Effect Assisted by Added Carbon Nanotubes on Crystallization Kinetics of Isotactic Polypropylene in Nanocomposites

Carbon Nanotubes Suppressed Crystallization Kinetics in PLLA Thin Film As Revealed by in Situ RAIR Technique

Combined Effects of Cellulose Nanofiber Nucleation and Maleated Polylactic Acid Compatibilization on the Crystallization Kinetic and Mechanical Properties of Polylactic Acid Nanocomposite

Role of multi-wall carbon nanotube network in composites to crystallization of isotactic polypropylene matrix

Effect of Carbon Nanotubes on the Mechanical Properties and Crystallization Behavior of Poly(ether Ether Ketone)

Functionalized Boron Nitride Nanosheets/Poly(l-lactide) Nanocomposites and Their Crystallization Behavior

Comparison of Precipitated Calcium Carbonate/Polylactic Acid and Halloysite/Polylactic Acid Nanocomposites

Functionality of Cellulose Nanofiber as Bio-Based Nucleating Agent and Nano-Reinforcement Material to Enhance Crystallization and Mechanical Properties of Polylactic Acid Nanocomposite

Melting and Crystallization Behaviors of Poly(Lactic Acid) Modified with Graphene Acting as a Nucleating Agent