Abstract:This paper describes a novel three-wire thermal flow sensor for medical applications. The present innovation for low-frequency measurements involves the use of a pulsed-wire anemometer with a comparatively large wire diameter (12.5 microm and larger) together with a novel signal processing approach. A small wire is heated using a sinusoidal alternating current, and two sensing wires, acting as resistance thermometers, are set parallel to, and at a small distance on either side of, the pulsed wire. The thermal wake of the pulsed wire is convected downstream to one of the two receiving wires which detect its delayed arrival. This arrangement allows the sensing of both the direction and the flow velocity component normal to the three probes. By appropriate signal processing, the present sensor can be operated such that the phase shift between the periodic current that drives the central wire and the detected signal by either the upstream or downstream wire takes into account a combination of convection, diffusion and the finite thermal response time of both the pulsed wire and the receiving wire. Because the time constants increase as the flow velocity decreases, the time lag due to thermal inertia supplements the time lag due to the true time of flight, thus yielding an effective operating range of 0.05 m/s <or= U <or= 25 m/s , which corresponds to a dynamic range of 500:1. This wide velocity range is an order of magnitude larger than that for the traditional time-of-flight pulsed-wire anemometers. An important application of the bi-directional thermal flowmeter is the measurement of human respiration, e.g. for early diagnostics of asthmatic attacks. The main advantage of the present sensor is its low sensitivity to variations in temperature and also to the composition of the flowing gas. Also, a calibration will be not needed for each density and gas used in addition to that for velocity. The resultant design work aimed at developing a sensor that can be mass-produced at low cost.

In-fibre Bragg grating flow-directed thermodilution catheter for cardiac monitoring

Optical In-Fiber Bragg Grating Sensor Systems for Medical Applications.

In-situ temperature monitoring in NMR machines with a prototype in-fibre Bragg grating sensor system

In-fiber Bragg-grating Temperature Sensor System for Medical Applications

Optical flow sensor for continuous invasive measurement of blood flow velocity

Spatiotemporal Hemodynamic Monitoring Via Configurable Skin-Like Microfiber Bragg Grating Group

Pressure sensor catheter based on Fiber Tip Fabry-Pérot-Interferometer and Fiber Bragg Grating for temperature compensation

Medical Temperature Profile Monitoring Using Multiplexed Fibre Bragg Gratings

Bi-directional flow sensor with a wide dynamic range for medical applications

Fibre Bragg Grating Sensors for Fusion Diagnostics: Temperature Monitoring of a Tungsten Mono-Block Mock-Up under High Heat Flux

Characteristics of an optimized catheter-type thermal flow sensor for measuring reciprocating airflows in bronchial pathways

A battery-less wireless implant for the continuous monitoring of vascular pressure, flow rate and temperature

Thermal diffusion probe and instrument system for tissue blood flow measurements: validation in phantoms and in vivo organs

[Method and Apparatus for Blood Flow Detection Based on Detention Catheter].

Helical long period fiber grating sensor for non-invasive measurement of vital signs

A Non-Invasive Multichannel Hybrid Fiber-Optic Sensor System for Vital Sign Monitoring

Fiber bragg grating sensor based device for simultaneous measurement of respiratory and cardiac activities

A Paradigm Shift in Catheter Development: Thermally Drawn Polymeric Fibers for MR-Guided Cardiovascular Interventions

An Impedance Wire Integrated with Flexible Flow Sensor and FFR Sensor for Cardiovascular Measurements

Fiber Bragg Grating-Based Smart Garment for Monitoring Human Body Temperature

Liquid Flow Meter by Fiber-Optic Sensing of Heat Propagation