Abstract:Sodium-ion batteries (SIBs) have attracted much focus as electrochemical energy storage devices with unlimited potential for upcoming large-scale energy storage applications. Nevertheless, sodium ions with large radius and high mass can hinder sodium ions from diffusing into the electrode material, resulting in poor energy/power density and cycling stability. Therefore, a highly conductive three-dimensional carbon network composed of V 5 Se 8 with a self-intercalated layer structure and one-dimensional multi-walled carbon nanotubes (MWCNTs) has been prepared using a straightforward one-step selenization process. This three-dimensional structure can increase the reversible sodium ion storage capacity and structural stability during the cycling process. The obtained V 5 Se 8 /MWCNTs electrodes have outstanding rate capacity (250 mAh g -1 at 10 A g -1 ) and tremendous initial reversible capacity (353 mAh g -1 at 0.2 A g -1 ). After 1000 cycles, they also obtain adequate cycling stability (323 mAh g -1 at 2 A g -1 ). The reaction mechanism of V 5 Se 8 /MWCNTs electrode in SIBs has been studied using X-ray diffraction (XRD) and transmission electron microscopy (TEM) methods, demonstrating that this electrode experiences a reversible phase transition between V 5 Se 8 and V throughout the Na + insertion/extraction procedures. The full cell can offer a discharge plateau of 2.02 V when coupled with a Na 3 V 2 (PO 4 ) 2 F 3 @reduced graphene oxide cathode. It also has an excellent discharge capacity of 177 mAh g -1 at 0.1 A g -1 and good cycling stability of 78.6 mAh g -1 after 1000 cycles at 1 A g -1 .

Sponge‐Like Cathode Material Self‐Assembled from Two‐Dimensional V2O5 Nanosheets for Sodium‐Ion Batteries

VOPO4⋅2H2O Nanosheet Cathode for Enhanced Sodium Storage

Carbon-Coated SnS Nanosheets Supported on Porous Microspheres as Negative Electrode Material for Sodium-Ion Batteries

“Electron/Ion Sponge”-Like V-Based Polyoxometalate: Toward High-Performance Cathode for Rechargeable Sodium Ion Batteries

VOPO<sub>4</sub>?2H<sub>2</sub>O Nanosheet Cathode for Enhanced Sodium Storage

Enhancing Sodium-Ion Transport by Hollow Nanotube Structure Design of a V5S8@C Anode for Sodium-Ion Batteries

Enhancing lithium/sodium-ion storage behaviors in V2O5 nanosheet by freeze-drying

Facile synthesis of tetragonal NaV2O5·H2O nanosheets co-intercalated by high content of Na+ and H2O for boosted lithium storage

A Fully Sodiated NaVOPO4 with Layered Structure for High-Voltage and Long-Lifespan Sodium-Ion Batteries

Free-Standing Sandwich-Structured Flexible Film Electrode Composed of Na2Ti3O7 Nanowires@CNT and Reduced Graphene Oxide for Advanced Sodium-Ion Batteries

A densely packed Sb 2 O 3 nanosheet-graphene aerogel toward advanced sodium-ion batteries.

Self-templating construction of hollow microspheres assembled by nanosheets with exposed active planes for sodium ion storage

A robust carbon coating of Na3V2(PO4)3 cathode material for high performance sodium-ion batteries

Ultrathin Ti2 Nb2 O9 Nanosheets with Pseudocapacitive Properties As Superior Anode for Sodium-Ion Batteries.

Three dimensional carbon coated In2S3 nanowires assembled graphene composites as high performance sodium ion battery anode

SnS2@C Hollow Nanospheres with Robust Structural Stability as High-Performance Anodes for Sodium Ion Batteries

Self-intercalated quasi-2D structured V 5 Se 8 wrapped with multi-walled carbon nanotubes toward advanced sodium ion batteries

A 1D Honeycomb-Like Amorphous Zincic Vanadate for Stable and Fast Sodium-Ion Storage.

Hydrogen Sodium Vanadium Oxide Hydrate with Oxygen Vacancy: A New Layered Cathode Material for Sodium-Ion Battery

A high-capacity, low-cost layered sodium manganese oxide material as cathode for sodium-ion batteries.

Free-standing Vanadium Pentoxide Nanoribbon Film As a High-Performance Cathode for Rechargeable Sodium Batteries