Abstract:Purpose: To develop the helical cone‐beam scanning capability on a simulator CT system and apply a recently developed backprojection‐filtration (BPF) algorithm to reconstruct exact 3D images from data obtained in this system. Method and Materials: Helical cone‐beam CT is an emerging technology with many advantages over conventional CT scans, such as fast volume coverage speed, efficient use of x‐ray power, and sufficient data for exact 3D image reconstruction. We developed the helical cone‐beam capability on a simulator CT device (Acuity, Varian Medical Systems), which includes a kV x‐ray source, a patient couch, and an amorphous silicon flat‐panel detector (Varian PaxScan 4030CB). We fabricated a small motorized leadscrew mechanism on the couch of the Acuity, which allows for longitudinal translation of the patient couch at a constant speed as the gantry rotates. We applied the BPF algorithm to reconstruct exact 3D images from data obtained in this system. Results: A CatPhan phantom was used for data acquisition. 683 projection data were collected during a one‐turn gantry rotation while the couch was translated longitudinally with a helical pitch of 187.2 mm. The x‐ray source was operated at 125 kVp and 560 mAs. Before projection data were used for reconstruction, a number of corrections were performed, such as bad pixel, dark field, flood field, detector sag. We also applied simple corrections for beam hardening and scattering. 3D images were reconstructed from the corrected data by use of the BPF algorithm. Conclusion: We have developed for the first time the helical scanning capability on a simulator cone‐beam CT system and performed a preliminary phantom study. The BPF algorithm was used to reconstruct exact 3D images from the helical cone‐beam data. Such approach can readily be extended to cone‐beam CT components on a LINAC to provide more accurate image representations of the patient.

Verifying Cone-Beam Ct Extended Axial Coverage With Iterative Reconstruction Using Real Data

Non-Circular Cone Beam Ct Trajectories: A Preliminary Investigation on A Clinical Scanner

A Novel Off-Axis Scanning Method for an Enlarged Ellipse Cone-Beam Computed Tomography Field of View.

Data-driven Method for 3D Axis-symmetric Object Reconstruction from Single Cone-beam Projection Data

Image Reconstruction in Reduced Circular Sinusoidal Cone-Beam CT

Non-Circular Scans and Image Reconstruction for Breast Ct

Dual-Energy Cone-Beam CT Using Two Complementary Limited-Angle Scans with A Projection-Consistent Diffusion Model

Improved Scanning And Reconstruction Of Large Objects By Cone-Beam Industrial Computed, Tomography

Data Incompleteness in Radon Space for Circular Cone-Beam Reconstruction

Iterative image reconstruction for limited‐angle inverse helical cone‐beam computed tomography

Katsevich-type Reconstruction for Dual Helical Cone-Beam CT

Rebinned Filtered Back-Projection Reconstruction from Truncated Data for Half-Covered Helical Cone-Beam Computed Tomography

Optimization-Based Cone-Beam Ct Reconstruction from A Virtual Isocenter Treatment Scan

SU‐CC‐J‐6C‐07: Helical Cone‐Beam CT for Radiation Therapy

A Computer Simulation Method of Projection Data for Cone-Beam Volume CT

Simulation Studies for Triple-Source Helical Cone-Beam CT

Collision-avoiding Imaging Trajectories for Linac Mounted Cone-Beam CT.

Cone-Beam Ct Data-Driven Pose Correction for Analytic Reconstruction Methods

Application of Asymmetric Cone-Beam CT in Radiotherapy

Initial Experience in Image Reconstruction from Limited-Angle C-arm CBCT Data

Reconstructible Volume for Cone-Beam CT with a Reduced Saddle Trajectory